main
Ray Publish 0.1.0 246f82a
{
  "slug": "ft245rl-reel",
  "version": "0.1.0",
  "type": "component",
  "description": "FTDI USB Converters, SSOP-28-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "ft245rl-reel",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ft245rl-reel.kicad_sym",
    "ft245rl-reel.kicad_mod",
    "ft245rl-reel.glb",
    "ft245rl-reel.step",
    "ft245rl-reel.lbr",
    "docs/hero.png",
    "docs/ft245rl-reel-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ft245rl-reel-hero.glb",
    "ft245rl-reel-hero.overlay.json",
    "ft245rl-reel-etched.glb"
  ],
  "component": {
    "mpn": "FT245RL-REEL",
    "manufacturer": "FTDI",
    "package": "SSOP-28-208mil",
    "pin_count": 28,
    "category": "Interface",
    "subcategory": "USB Converters",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586202547791278080",
    "parts": {
      "symbol": "ft245rl-reel.kicad_sym",
      "footprint": "ft245rl-reel.kicad_mod",
      "model_3d": "ft245rl-reel-hero.glb",
      "model_3d_plain": "ft245rl-reel-etched.glb",
      "model_3d_step": "ft245rl-reel-etched.step",
      "model_3d_step_plain": "ft245rl-reel.step",
      "lbr": "ft245rl-reel.lbr"
    },
    "distributor_links": {
      "lcsc": "C12633",
      "digikey": "768-1011-2-ND",
      "mouser": "895-FT245RL"
    },
    "distributor_check": {
      "checked_at": "2026-10-19T04:43:44Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "768-1011-2-ND",
        "status": "found",
        "lifecycle": "Obsolete"
      },
      "mouser": {
        "pn": "895-FT245RL",
        "status": "found",
        "lifecycle": "End of Life"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "D0",
        "type": "bidirectional",
        "description": "FIFO data bus bit 0 of the 8-bit D0...D7 parallel FIFO interface, powered from the VCCIO domain (+1.8V to +5.25V)."
      },
      {
        "number": "2",
        "name": "D4",
        "type": "bidirectional",
        "description": "FIFO data bus bit 4 of the 8-bit D0...D7 parallel FIFO interface, powered from the VCCIO domain (+1.8V to +5.25V)."
      },
      {
        "number": "3",
        "name": "D2",
        "type": "bidirectional",
        "description": "FIFO data bus bit 2 of the 8-bit D0...D7 parallel FIFO interface, powered from the VCCIO domain (+1.8V to +5.25V)."
      },
      {
        "number": "4",
        "name": "VCCIO",
        "type": "power_in",
        "description": "+1.8V to +5.25V supply to the FIFO interface group pins; connect to 3V3OUT for 3.3V output levels or to VCC for 5V CMOS output levels, or supply an external +1.8V to +2.8V source from the same source as VCC."
      },
      {
        "number": "5",
        "name": "D1",
        "type": "bidirectional",
        "description": "FIFO data bus bit 1 of the 8-bit D0...D7 parallel FIFO interface, powered from the VCCIO domain (+1.8V to +5.25V)."
      },
      {
        "number": "6",
        "name": "D7",
        "type": "bidirectional",
        "description": "FIFO data bus bit 7 of the 8-bit D0...D7 parallel FIFO interface, powered from the VCCIO domain (+1.8V to +5.25V)."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground supply pin."
      },
      {
        "number": "8",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection."
      },
      {
        "number": "9",
        "name": "D5",
        "type": "bidirectional",
        "description": "FIFO data bus bit 5 of the 8-bit D0...D7 parallel FIFO interface, powered from the VCCIO domain (+1.8V to +5.25V)."
      },
      {
        "number": "10",
        "name": "D6",
        "type": "bidirectional",
        "description": "FIFO data bus bit 6 of the 8-bit D0...D7 parallel FIFO interface, powered from the VCCIO domain (+1.8V to +5.25V)."
      },
      {
        "number": "11",
        "name": "D3",
        "type": "bidirectional",
        "description": "FIFO data bus bit 3 of the 8-bit D0...D7 parallel FIFO interface, powered from the VCCIO domain (+1.8V to +5.25V)."
      },
      {
        "number": "12",
        "name": "PWREN#",
        "type": "output",
        "description": "Goes low after USB configuration and high during USB suspend, intended to drive a P-channel logic-level MOSFET power switch for external logic, with a 10kΩ pull-up to VCCIO recommended."
      },
      {
        "number": "13",
        "name": "RD#",
        "type": "input",
        "description": "Enables the current FIFO data byte on D0...D7 when low, and fetches the next receive FIFO byte on a high-to-low transition."
      },
      {
        "number": "14",
        "name": "WR",
        "type": "input",
        "description": "Writes the data byte on D0...D7 into the transmit FIFO buffer on a high-to-low transition."
      },
      {
        "number": "15",
        "name": "USBDP",
        "type": "bidirectional",
        "description": "USB data signal plus with internal series resistor and 1.5kΩ pull-up to 3.3V."
      },
      {
        "number": "16",
        "name": "USBDM",
        "type": "bidirectional",
        "description": "USB data signal minus with internal series resistor."
      },
      {
        "number": "17",
        "name": "3V3OUT",
        "type": "power_out",
        "description": "+3.3V output from the integrated LDO regulator, to be decoupled with 100nF to ground, which can supply up to 50mA to external logic and can be used to supply VCCIO."
      },
      {
        "number": "18",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground supply pin."
      },
      {
        "number": "19",
        "name": "RESET#",
        "type": "input",
        "description": "Active-low reset input that may be driven by an external device, and may be left unconnected or pulled up to VCC if not used."
      },
      {
        "number": "20",
        "name": "VCC",
        "type": "power_in",
        "description": "+3.3V to +5.25V supply to the device core; a minimum of +4.0V is required when using the internal clock generator."
      },
      {
        "number": "21",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground supply pin."
      },
      {
        "number": "22",
        "name": "TXE#",
        "type": "output",
        "description": "When high, data must not be written to the FIFO; when low, data can be written by strobing WR high then low, and the pin is tri-state during reset."
      },
      {
        "number": "23",
        "name": "RXF#",
        "type": "output",
        "description": "When high, no data may be read from the FIFO; when low, data is available to read by strobing RD# low then high, and the pin is tri-state during reset."
      },
      {
        "number": "24",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection."
      },
      {
        "number": "25",
        "name": "AGND",
        "type": "power_in",
        "description": "Device analogue ground supply for the internal clock multiplier."
      },
      {
        "number": "26",
        "name": "TEST",
        "type": "input",
        "description": "Puts the device into IC test mode; must be tied to GND for normal operation, otherwise the device will appear to fail."
      },
      {
        "number": "27",
        "name": "OSCI",
        "type": "input",
        "description": "Input to the 12MHz oscillator cell, optional and may be left unconnected for normal operation."
      },
      {
        "number": "28",
        "name": "OSCO",
        "type": "output",
        "description": "Output from the 12MHz oscillator cell, optional and may be left unconnected for normal operation when the internal oscillator is used."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin 23 is printed as 'RXF' in Table 3.4 (page 9) but the active-low '#' is used throughout the datas; Pin 17 (3V3OUT) is printed as type 'Output' in the datasheet; mapped to KiCad power_out because it i; The datasheet's SSOP pinout figure (Figure 3.1, page 7) is graphical and its pin numbers could not b"
        ],
        "pages_sent": 20,
        "cost_usd": 0.0987,
        "at": "2026-10-19T04:41:41"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586202547791278080",
        "pages": 37,
        "sha256": "a84e5efedfeb9a07",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 28,
        "described": 28,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ft245rl-reel.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          10.2,
          2.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ft245rl-reel-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          10.2,
          2.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "82f57f6161e8f7c99c83de60756f0a56380c48775696fdba8f7e2a2e97bc3aa6",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}