Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

FT245RL-REEL

FTDI · USB Converters · SSOP-28-208mil

FT245RL-REEL from FTDI, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 D0 bidirectional FIFO data bus bit 0 of the 8-bit D0...D7 parallel FIFO interface, powered from the VCCIO domain (+1.8V to +5.25V).
2 D4 bidirectional FIFO data bus bit 4 of the 8-bit D0...D7 parallel FIFO interface, powered from the VCCIO domain (+1.8V to +5.25V).
3 D2 bidirectional FIFO data bus bit 2 of the 8-bit D0...D7 parallel FIFO interface, powered from the VCCIO domain (+1.8V to +5.25V).
4 VCCIO power_in +1.8V to +5.25V supply to the FIFO interface group pins; connect to 3V3OUT for 3.3V output levels or to VCC for 5V CMOS output levels, or supply an external +1.8V to +2.8V source from the same source as VCC.
5 D1 bidirectional FIFO data bus bit 1 of the 8-bit D0...D7 parallel FIFO interface, powered from the VCCIO domain (+1.8V to +5.25V).
6 D7 bidirectional FIFO data bus bit 7 of the 8-bit D0...D7 parallel FIFO interface, powered from the VCCIO domain (+1.8V to +5.25V).
7 GND power_in Device ground supply pin.
8 NC unconnected No internal connection.
9 D5 bidirectional FIFO data bus bit 5 of the 8-bit D0...D7 parallel FIFO interface, powered from the VCCIO domain (+1.8V to +5.25V).
10 D6 bidirectional FIFO data bus bit 6 of the 8-bit D0...D7 parallel FIFO interface, powered from the VCCIO domain (+1.8V to +5.25V).
11 D3 bidirectional FIFO data bus bit 3 of the 8-bit D0...D7 parallel FIFO interface, powered from the VCCIO domain (+1.8V to +5.25V).
12 PWREN# output Goes low after USB configuration and high during USB suspend, intended to drive a P-channel logic-level MOSFET power switch for external logic, with a 10kΩ pull-up to VCCIO recommended.
13 RD# input Enables the current FIFO data byte on D0...D7 when low, and fetches the next receive FIFO byte on a high-to-low transition.
14 WR input Writes the data byte on D0...D7 into the transmit FIFO buffer on a high-to-low transition.
15 USBDP bidirectional USB data signal plus with internal series resistor and 1.5kΩ pull-up to 3.3V.
16 USBDM bidirectional USB data signal minus with internal series resistor.
17 3V3OUT power_out +3.3V output from the integrated LDO regulator, to be decoupled with 100nF to ground, which can supply up to 50mA to external logic and can be used to supply VCCIO.
18 GND power_in Device ground supply pin.
19 RESET# input Active-low reset input that may be driven by an external device, and may be left unconnected or pulled up to VCC if not used.
20 VCC power_in +3.3V to +5.25V supply to the device core; a minimum of +4.0V is required when using the internal clock generator.
21 GND power_in Device ground supply pin.
22 TXE# output When high, data must not be written to the FIFO; when low, data can be written by strobing WR high then low, and the pin is tri-state during reset.
23 RXF# output When high, no data may be read from the FIFO; when low, data is available to read by strobing RD# low then high, and the pin is tri-state during reset.
24 NC unconnected No internal connection.
25 AGND power_in Device analogue ground supply for the internal clock multiplier.
26 TEST input Puts the device into IC test mode; must be tied to GND for normal operation, otherwise the device will appear to fail.
27 OSCI input Input to the 12MHz oscillator cell, optional and may be left unconnected for normal operation.
28 OSCO output Output from the 12MHz oscillator cell, optional and may be left unconnected for normal operation when the internal oscillator is used.

Key specifications

Parameter Value
Manufacturer FTDI
Package SSOP-28-208mil
Category Interface
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage Temperature -65 150 °C 17
Ambient Temperature (Power Applied) -40 85 °C 17
VCC Supply Voltage VCC -0.5 6 V 17
DC Input Voltage, USBDP and USBDM -0.5 3.8 V 17
DC Input Voltage, High Impedance Bidirectionals -0.5 V 17
DC Input Voltage, All Other Inputs -0.5 V 17
DC Output Current, Outputs 24 mA 17
Floor Life (Out of Bag) 168 Hours At Factory Ambient (30°C / 60% Relative Humidity) 17
VCC Operating Supply Voltage VCC1 4 5.25 V Using Internal Oscillator 18
VCC Operating Supply Voltage VCC1 3.3 5.25 V Using External Crystal 18
VCCIO Operating Supply Voltage VCC2 1.8 5.25 V 18
Operating Supply Current, USB Suspend Icc2 50 70 100 μA USB Suspend 18
3.3V regulator output 3V3 3 3.3 3.6 V 18
FIFO I/O Output Voltage High (VCCIO=+5.0V, Standard Drive) Voh 3.2 4.1 4.9 V VCCIO=+5.0V, standard drive; I source = 2mA 18
FIFO I/O Output Voltage Low (VCCIO=+5.0V, Standard Drive) Vol 0.3 0.4 0.6 V VCCIO=+5.0V, standard drive; I sink = 2mA 18
FIFO I/O Input Switching Threshold (VCCIO=+5.0V, Standard Drive) Vin 1 1.2 1.5 V VCCIO=+5.0V, standard drive 18
FIFO I/O Input Switching Hysteresis (VCCIO=+5.0V, Standard Drive) VHys 20 25 30 mV VCCIO=+5.0V, standard drive 18
FIFO I/O Output Voltage High (VCCIO=+3.3V, Standard Drive) Voh 2.2 2.7 3.2 V VCCIO=+3.3V, standard drive; I source = 1mA 18
FIFO I/O Output Voltage Low (VCCIO=+3.3V, Standard Drive) Vol 0.3 0.4 0.5 V VCCIO=+3.3V, standard drive; I sink = 2mA 18
FIFO I/O Input Switching Threshold (VCCIO=+3.3V, Standard Drive) Vin 1 1.2 1.5 V VCCIO=+3.3V, standard drive 18
FIFO I/O Input Switching Hysteresis (VCCIO=+3.3V, Standard Drive) VHys 20 25 30 mV VCCIO=+3.3V, standard drive 18
FIFO I/O Output Voltage High (VCCIO=+2.8V, Standard Drive) Voh 2.1 2.6 2.8 V VCCIO=+2.8V, standard drive; I source = 1mA 19
FIFO I/O Output Voltage Low (VCCIO=+2.8V, Standard Drive) Vol 0.3 0.4 0.5 V VCCIO=+2.8V, standard drive; I sink = 2mA 19
FIFO I/O Input Switching Threshold (VCCIO=+2.8V, Standard Drive) Vin 1 1.2 1.5 V VCCIO=+2.8V, standard drive 19
FIFO I/O Input Switching Hysteresis (VCCIO=+2.8V, Standard Drive) VHys 20 25 30 mV VCCIO=+2.8V, standard drive 19
FIFO I/O Output Voltage High (VCCIO=+1.8V, Standard Drive) Voh 1.32 1.62 1.8 V VCCIO=+1.8V, standard drive; I source = 0.2mA 19
FIFO I/O Output Voltage Low (VCCIO=+1.8V, Standard Drive) Vol 0.06 0.1 0.18 V VCCIO=+1.8V, standard drive; I sink = 0.5mA 19
FIFO I/O Input Switching Threshold (VCCIO=+1.8V, Standard Drive) Vin 1 1.2 1.5 V VCCIO=+1.8V, standard drive 19
FIFO I/O Input Switching Hysteresis (VCCIO=+1.8V, Standard Drive) VHys 20 25 30 mV VCCIO=+1.8V, standard drive 19
FIFO I/O Output Voltage High (VCCIO=+5.0V, High Drive) Voh 3.2 4.1 4.9 V VCCIO=+5.0V, high drive; I source = 6mA 19
FIFO I/O Output Voltage Low (VCCIO=+5.0V, High Drive) Vol 0.3 0.4 0.6 V VCCIO=+5.0V, high drive; I sink = 6mA 19
FIFO I/O Input Switching Threshold (VCCIO=+5.0V, High Drive) Vin 1 1.2 1.5 V VCCIO=+5.0V, high drive 19
FIFO I/O Input Switching Hysteresis (VCCIO=+5.0V, High Drive) VHys 20 25 30 mV VCCIO=+5.0V, high drive 19
FIFO I/O Output Voltage High (VCCIO=+3.3V, High Drive) Voh 2.2 2.8 3.2 V VCCIO=+3.3V, high drive; I source = 3mA 19
FIFO I/O Output Voltage Low (VCCIO=+3.3V, High Drive) Vol 0.3 0.4 0.6 V VCCIO=+3.3V, high drive; I sink = 8mA 19
FIFO I/O Input Switching Threshold (VCCIO=+3.3V, High Drive) Vin 1 1.2 1.5 V VCCIO=+3.3V, high drive 19
FIFO I/O Input Switching Hysteresis (VCCIO=+3.3V, High Drive) VHys 20 25 30 mV VCCIO=+3.3V, high drive 19
FIFO I/O Output Voltage High (VCCIO=+2.8V, High Drive) Voh 2.1 2.6 2.8 V VCCIO=+2.8V, high drive; I source = 3mA 20
FIFO I/O Output Voltage Low (VCCIO=+2.8V, High Drive) Vol 0.3 0.4 0.5 V VCCIO=+2.8V, high drive; I sink = 8mA 20
FIFO I/O Input Switching Threshold (VCCIO=+2.8V, High Drive) Vin 1 1.2 1.5 V VCCIO=+2.8V, high drive 20
FIFO I/O Input Switching Hysteresis (VCCIO=+2.8V, High Drive) VHys 20 25 30 mV VCCIO=+2.8V, high drive 20
FIFO I/O Output Voltage High (VCCIO=+1.8V, High Drive) Voh 1.35 1.67 1.8 V VCCIO=+1.8V, high drive; I source = 0.4mA 20
FIFO I/O Output Voltage Low (VCCIO=+1.8V, High Drive) Vol 0.12 0.18 0.35 V VCCIO=+1.8V, high drive; I sink = 3mA 20
FIFO I/O Input Switching Threshold (VCCIO=+1.8V, High Drive) Vin 1 1.2 1.5 V VCCIO=+1.8V, high drive 20
FIFO I/O Input Switching Hysteresis (VCCIO=+1.8V, High Drive) VHys 20 25 30 mV VCCIO=+1.8V, high drive 20
RESET# and TEST Input Switching Threshold Vin 1.3 1.6 1.9 V 20
RESET# and TEST Input Switching Hysteresis VHys 50 55 60 mV 20
I/O Pins Static Output (Low) UVol 0 0.3 V RI = 1.5kΩ to 3V3OUT (D+); RI = 15kΩ to GND (D-) 21
Driver Output Impedance UDrvZ 26 29 44 Ohms See Note 1 21
Internal Clock Frequency of Operation 11.98 12 12.02 MHz 21
Internal Clock Period 83.19 83.33 83.47 ns 21
Internal Clock Duty Cycle 45 50 55 % 21
OSCI, OSCO Output Voltage High Voh 2.1 2.8 3.2 V I source = 3mA; see Note 1 21
OSCI, OSCO Output Voltage Low Vol 0.3 0.4 0.6 V I sink = 8mA; see Note 1 21
OSCI, OSCO Input Switching Threshold Vin 1 1.2 1.5 V see Note 1 21
Operating Supply Current, Normal Operation Icc1 15 mA Normal Operation 18

CAD (KiCad official)

  • Symbol: FT245RL-REEL
  • Footprint: Package_SO:SSOP-28_5.3x10.2mm_P0.65mm
  • 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
  • 3D model files: ft245rl-reel-etched.step / ft245rl-reel-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ft245rl-reel.step / ft245rl-reel.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: FTDI datasheet (37 pp, sha256 a84e5efedfeb9a07, retrieved 2026-10-19, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF