component
ET60T-S03-5-05-000-S-R1-S
Public Made by Adomby adom
Samtec Samtec ET60T series board connector (R1 right-angle), Samtec_ET60T-S03-5-05-000-S-R1-S. KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.
main
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800
(footprint "Samtec_ET60T-S03-5-05-000-S-R1-S"
(layer "F.Cu")
(property "Reference" "REF**"
(at 2.89 14.4 180)
(layer B.SilkS)
(hide yes)
(uuid "7fbb8a4e-c2a5-49f2-bd1a-d3756ddb7eea")
(effects
(font (size 1 1) (thickness 0.15))
(justify)
)
)
(property "Value" "Samtec_ET60T-S03-5-05-000-S-R1-S"
(at 2.52 11.47 180)
(layer B.SilkS)
(hide yes)
(uuid "966d2d1a-fdc7-4455-9982-4efaa0418b45")
(effects
(font (size 1 1) (thickness 0.15))
(justify)
)
)
(property "Datasheet" "https://suddendocs.samtec.com/prints/et60t-xxx-x-xx-xxx-x-rx-x-x-mkt.pdf"
(at 0 0 180)
(layer F.Fab)
(hide yes)
(uuid "c04c6d11-880f-45c0-b507-72760135579e")
(effects
(font (size 1.27 1.27) (thickness 0.15))
(justify)
)
)
(property "Description" "SPLIT POWER (3) (30A), SIGNAL (25) (5A)"
(at 0 0 180)
(layer F.Fab)
(hide yes)
(uuid "c23a02f3-f208-437b-bdb7-5e1a0f00bcd1")
(effects
(font (size 1.27 1.27) (thickness 0.15))
(justify)
)
)
(property "Custom P/N" "ET60T-S03-5-05-000-S-R1-S"
(at -8.5 -13.5 180)
(layer F.SilkS)
(hide yes)
(uuid "021474f6-e52c-4ca7-9aea-8051e96baa0f")
(effects
(font (size 1 1) (thickness 0.1))
(justify)
)
)
(property "MAXIMUM_PACKAGE_HEIGHT" "10.0mm"
(at 0 0)
(unlocked yes)
(layer F.Fab)
(hide yes)
(uuid "48660509-aae4-4f9c-98bc-d27af5408239")
(effects
(font (size 1 1) (thickness 0.15))
(justify)
)
)
(units
(unit
(name "A")
(pins "P1_6" "P1_7" "P1_8" "P1_9" "P1_10" "P2_6" "P2_7" "P2_8" "P2_9" "P2_10" "P3_6" "P3_7" "P3_8" "P3_9" "P3_10" "1" "2" "3" "4" "5" "11" "12" "13" "14" "15" "21" "22" "23" "24" "25" "P1_1" "P1_2" "P1_3" "P1_4" "P1_5" "P2_1" "P2_2" "P2_3" "P2_4" "P2_5" "P3_1" "P3_2" "P3_3" "P3_4" "P3_5" "6" "7" "8" "9" "10" "16" "17" "18" "19" "20"
)
)
)
(attr through_hole exclude_from_pos_files exclude_from_bom)
(duplicate_pad_numbers_are_jumpers no)
(fp_line
(start -22.82 -7.1)
(end -22.82 6.65)
(stroke (width 0.2) (type solid))
(layer F.SilkS)
(uuid "2fa77fd5-1463-4bb0-8bbf-4590de1cc6b8")
)
(fp_line
(start -22.82 -7.1)
(end -15.215 -7.1)
(stroke (width 0.2) (type solid))
(layer F.SilkS)
(uuid "92d80f17-b4ae-41cb-9196-aa05e76b4ed7")
)
(fp_line
(start -9.215 -7.1)
(end -7.215 -7.1)
(stroke (width 0.2) (type solid))
(layer F.SilkS)
(uuid "25f68ef2-318d-44ad-ae90-239f0633e94a")
)
(fp_line
(start -1.215 -7.1)
(end 0.785 -7.1)
(stroke (width 0.2) (type solid))
(layer F.SilkS)
(uuid "3b5a6831-7264-402a-9191-fbf6423503a5")
)
(fp_line
(start 28.39 -7.1)
(end 6.785 -7.1)
(stroke (width 0.2) (type solid))
(layer F.SilkS)
(uuid "92285247-89e6-40e3-ae15-065be3304ae4")
)
(fp_line
(start 28.39 -7.1)
(end 28.39 6.65)
(stroke (width 0.2) (type solid))
(layer F.SilkS)
(uuid "f1c2efaf-f09d-45c5-b30e-a99fa2bd7e17")
)
(fp_rect
(start -23.32 -7.6)
(end 28.89 22.15)
(stroke (width 0.1) (type default))
(fill no)
(layer F.CrtYd)
(uuid "124070fa-c83e-44f1-bddb-d16a33a34fdc")
)
(fp_line
(start -30.22 6.65)
(end 28.39 6.65)
(stroke (width 0.1) (type solid))
(layer F.Fab)
(uuid "cabbd41c-66b8-4129-af69-267001b9a0c8")
)
(fp_rect
(start -22.82 -7.1)
(end 28.39 22.15)
(stroke (width 0.1) (type default))
(fill no)
(layer F.Fab)
(uuid "c357808a-ba54-4a4f-a0e0-4e06ce442600")
)
(fp_text user "P1"
(at -10.86 -7.87 180)
(unlocked yes)
(layer F.SilkS)
(uuid "c8d43160-0157-4eaf-9ea8-a5654dbf9af8")
(effects
(font (size 1 1) (thickness 0.1))
(justify right bottom)
)
)
(fp_text user "P3"
(at 5.24 -7.87 180)
(unlocked yes)
(layer F.SilkS)
(uuid "f569bf56-0cad-40b4-8830-0ff73a68cbcc")
(effects
(font (size 1 1) (thickness 0.1))
(justify right bottom)
)
)
(fp_text user "21"
(at 11.585 -7.97 180)
(unlocked yes)
(layer F.SilkS)
(uuid "217a8b00-4ab3-4b67-a8bf-b912bfe049b1")
(effects
(font (size 1 1) (thickness 0.1))
(justify right bottom)
)
)
(fp_text user "25"
(at 19.89 -7.97 180)
(unlocked yes)
(layer F.SilkS)
(uuid "9aec7c94-adfc-450a-92b6-80fb2bb9af54")
(effects
(font (size 1 1) (thickness 0.1))
(justify right bottom)
)
)
(fp_text user "PCB EDGE"
(at -32.22 6.09 180)
(layer F.Fab)
(uuid "746ded23-7ccd-4621-88c7-d680c67bfda3")
(effects
(font (size 0.64 0.64) (thickness 0.15))
(justify)
)
)
(fp_text user "P1"
(at -10.86 -7.87 180)
(unlocked yes)
(layer F.Fab)
(uuid "5f86781c-6cb0-46d0-aeb9-4c8b29883cf7")
(effects
(font (size 1 1) (thickness 0.1))
(justify right bottom)
)
)
(fp_text user "P3"
(at 5.24 -7.87 180)
(unlocked yes)
(layer F.Fab)
(uuid "d1ef3db5-bbe7-446b-99cc-48f0fe6dea5e")
(effects
(font (size 1 1) (thickness 0.1))
(justify right bottom)
)
)
(fp_text user "21"
(at 11.585 -7.97 180)
(unlocked yes)
(layer F.Fab)
(uuid "0a9393e0-e5f8-42c0-b116-c20bbe518aa5")
(effects
(font (size 1 1) (thickness 0.1))
(justify right bottom)
)
)
(fp_text user "25"
(at 19.89 -7.97 180)
(unlocked yes)
(layer F.Fab)
(uuid "bf8a8a0e-4913-41ea-ba96-03f7059cca64")
(effects
(font (size 1 1) (thickness 0.1))
(justify right bottom)
)
)
(pad "" np_thru_hole circle
(at -19.5 -1.5)
(size 3.2 3.2)
(drill 3.2)
(layers "*.Cu" "*.Mask")
(clearance 0.5)
)
(pad "" np_thru_hole circle
(at 24.71 -1.5)
(size 3.2 3.2)
(drill 3.2)
(layers "*.Cu" "*.Mask")
(clearance 0.3)
)
(pad "1" thru_hole rect
(at 11.14 3.49)
(size 1 1)
(drill 0.7)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
(teardrops
(best_length_ratio 0.5)
(max_length 1)
(best_width_ratio 1)
(max_width 2)
(curved_edges no)
(filter_ratio 0.9)
(enabled yes)
(allow_two_segments yes)
(prefer_zone_connections yes)
)
)
(pad "2" thru_hole circle
(at 13.14 3.49)
(size 1 1)
(drill 0.7)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
(teardrops
(best_length_ratio 0.5)
(max_length 1)
(best_width_ratio 1)
(max_width 2)
(curved_edges no)
(filter_ratio 0.9)
(enabled yes)
(allow_two_segments yes)
(prefer_zone_connections yes)
)
)
(pad "3" thru_hole circle
(at 15.14 3.49)
(size 1 1)
(drill 0.7)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
(teardrops
(best_length_ratio 0.5)
(max_length 1)
(best_width_ratio 1)
(max_width 2)
(curved_edges no)
(filter_ratio 0.9)
(enabled yes)
(allow_two_segments yes)
(prefer_zone_connections yes)
)
)
(pad "4" thru_hole circle
(at 17.14 3.49)
(size 1 1)
(drill 0.7)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
(teardrops
(best_length_ratio 0.5)
(max_length 1)
(best_width_ratio 1)
(max_width 2)
(curved_edges no)
(filter_ratio 0.9)
(enabled yes)
(allow_two_segments yes)
(prefer_zone_connections yes)
)
)
(pad "5" thru_hole circle
(at 19.14 3.49)
(size 1 1)
(drill 0.7)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
(teardrops
(best_length_ratio 0.5)
(max_length 1)
(best_width_ratio 1)
(max_width 2)
(curved_edges no)
(filter_ratio 0.9)
(enabled yes)
(allow_two_segments yes)
(prefer_zone_connections yes)
)
)
(pad "6" thru_hole circle
(at 11.14 1.49)
(size 1 1)
(drill 0.7)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
(teardrops
(best_length_ratio 0.5)
(max_length 1)
(best_width_ratio 1)
(max_width 2)
(curved_edges no)
(filter_ratio 0.9)
(enabled yes)
(allow_two_segments yes)
(prefer_zone_connections yes)
)
)
(pad "7" thru_hole circle
(at 13.14 1.49)
(size 1 1)
(drill 0.7)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
(teardrops
(best_length_ratio 0.5)
(max_length 1)
(best_width_ratio 1)
(max_width 2)
(curved_edges no)
(filter_ratio 0.9)
(enabled yes)
(allow_two_segments yes)
(prefer_zone_connections yes)
)
)
(pad "8" thru_hole circle
(at 15.14 1.49)
(size 1 1)
(drill 0.7)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
(teardrops
(best_length_ratio 0.5)
(max_length 1)
(best_width_ratio 1)
(max_width 2)
(curved_edges no)
(filter_ratio 0.9)
(enabled yes)
(allow_two_segments yes)
(prefer_zone_connections yes)
)
)
(pad "9" thru_hole circle
(at 17.14 1.49)
(size 1 1)
(drill 0.7)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
(teardrops
(best_length_ratio 0.5)
(max_length 1)
(best_width_ratio 1)
(max_width 2)
(curved_edges no)
(filter_ratio 0.9)
(enabled yes)
(allow_two_segments yes)
(prefer_zone_connections yes)
)
)
(pad "10" thru_hole circle
(at 19.14 1.49)
(size 1 1)
(drill 0.7)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
(teardrops
(best_length_ratio 0.5)
(max_length 1)
(best_width_ratio 1)
(max_width 2)
(curved_edges no)
(filter_ratio 0.9)
(enabled yes)
(allow_two_segments yes)
(prefer_zone_connections yes)
)
)
(pad "11" thru_hole circle
(at 11.14 -0.51)
(size 1 1)
(drill 0.7)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "12" thru_hole circle
(at 13.14 -0.51)
(size 1 1)
(drill 0.7)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "13" thru_hole circle
(at 15.14 -0.51)
(size 1 1)
(drill 0.7)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "14" thru_hole circle
(at 17.14 -0.51)
(size 1 1)
(drill 0.7)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "15" thru_hole circle
(at 19.14 -0.51)
(size 1 1)
(drill 0.7)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "16" thru_hole circle
(at 11.14 -2.51)
(size 1 1)
(drill 0.7)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "17" thru_hole circle
(at 13.14 -2.51)
(size 1 1)
(drill 0.7)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "18" thru_hole circle
(at 15.14 -2.51)
(size 1 1)
(drill 0.7)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "19" thru_hole circle
(at 17.14 -2.51)
(size 1 1)
(drill 0.7)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "20" thru_hole circle
(at 19.14 -2.51)
(size 1 1)
(drill 0.7)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "21" thru_hole circle
(at 11.14 -4.51)
(size 1 1)
(drill 0.7)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "22" thru_hole circle
(at 13.14 -4.51)
(size 1 1)
(drill 0.7)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "23" thru_hole circle
(at 15.14 -4.51)
(size 1 1)
(drill 0.7)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "24" thru_hole circle
(at 17.14 -4.51)
(size 1 1)
(drill 0.7)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "25" thru_hole circle
(at 19.14 -4.51)
(size 1 1)
(drill 0.7)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "P1_1" thru_hole circle
(at -14 -6.5)
(size 1.53 1.53)
(drill 1.02)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "P1_2" thru_hole circle
(at -14 -4)
(size 1.53 1.53)
(drill 1.02)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "P1_3" thru_hole circle
(at -14 -1.5)
(size 1.53 1.53)
(drill 1.02)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "P1_4" thru_hole circle
(at -14 1)
(size 1.53 1.53)
(drill 1.02)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "P1_5" thru_hole circle
(at -14 3.5)
(size 1.53 1.53)
(drill 1.02)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "P1_6" thru_hole circle
(at -10.5 -6.5 180)
(size 1.53 1.53)
(drill 1.02)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "P1_7" thru_hole circle
(at -10.5 -4 180)
(size 1.53 1.53)
(drill 1.02)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "P1_8" thru_hole circle
(at -10.5 -1.5 180)
(size 1.53 1.53)
(drill 1.02)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "P1_9" thru_hole circle
(at -10.5 1 180)
(size 1.53 1.53)
(drill 1.02)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "P1_10" thru_hole circle
(at -10.5 3.5 180)
(size 1.53 1.53)
(drill 1.02)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "P2_1" thru_hole circle
(at -6 -6.5)
(size 1.53 1.53)
(drill 1.02)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "P2_2" thru_hole circle
(at -6 -4)
(size 1.53 1.53)
(drill 1.02)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "P2_3" thru_hole circle
(at -6 -1.5)
(size 1.53 1.53)
(drill 1.02)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "P2_4" thru_hole circle
(at -6 1)
(size 1.53 1.53)
(drill 1.02)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "P2_5" thru_hole circle
(at -6 3.5)
(size 1.53 1.53)
(drill 1.02)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "P2_6" thru_hole circle
(at -2.5 -6.5 180)
(size 1.53 1.53)
(drill 1.02)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "P2_7" thru_hole circle
(at -2.5 -4 180)
(size 1.53 1.53)
(drill 1.02)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "P2_8" thru_hole circle
(at -2.5 -1.5 180)
(size 1.53 1.53)
(drill 1.02)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "P2_9" thru_hole circle
(at -2.5 1 180)
(size 1.53 1.53)
(drill 1.02)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "P2_10" thru_hole circle
(at -2.5 3.5 180)
(size 1.53 1.53)
(drill 1.02)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "P3_1" thru_hole circle
(at 2 -6.5)
(size 1.53 1.53)
(drill 1.02)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "P3_2" thru_hole circle
(at 2 -4)
(size 1.53 1.53)
(drill 1.02)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "P3_3" thru_hole circle
(at 2 -1.5)
(size 1.53 1.53)
(drill 1.02)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "P3_4" thru_hole circle
(at 2 1)
(size 1.53 1.53)
(drill 1.02)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "P3_5" thru_hole circle
(at 2 3.5)
(size 1.53 1.53)
(drill 1.02)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "P3_6" thru_hole circle
(at 5.5 -6.5 180)
(size 1.53 1.53)
(drill 1.02)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "P3_7" thru_hole circle
(at 5.5 -4 180)
(size 1.53 1.53)
(drill 1.02)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "P3_8" thru_hole circle
(at 5.5 -1.5 180)
(size 1.53 1.53)
(drill 1.02)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "P3_9" thru_hole circle
(at 5.5 1 180)
(size 1.53 1.53)
(drill 1.02)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(pad "P3_10" thru_hole circle
(at 5.5 3.5 180)
(size 1.53 1.53)
(drill 1.02)
(layers "*.Cu" "*.Mask")
(remove_unused_layers no)
(solder_mask_margin 0.102)
)
(embedded_fonts no)
(model "${KIPRJMOD}/et60t-s03-5-05-000-s-r1-s.step"
(offset (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
(fp_line (start -22.81 6.4) (end 28.4 6.4) (stroke (width 0.1) (type dash)) (layer "Dwgs.User") (uuid "0cbcf904-291a-4f6d-a22b-8d90b423ee70"))
(fp_text user "PCB Edge" (at 2.8 5.6 0) (layer "Dwgs.User") (uuid "bc35de9e-89e3-4178-a581-4364bda82afb") (effects (font (size 1 1) (thickness 0.15))))
)