component

ET60T-S03-5-05-000-S-R1-S

Public Made by Adom

by adom

Samtec Samtec ET60T series board connector (R1 right-angle), Samtec_ET60T-S03-5-05-000-S-R1-S. KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.

componentconnectorset60t-s03-5-05-000-s-r1-sboard-derived

Verified ET60T-S03-5-05-000-S-R1-S

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 5 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against Samtec ET60T print Revision Y and recommended PCB layout ET60T-XXX-X-XX-XXX-X-RX-X-X-FOOTPRINT Revision Pfiles match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet: the page already carries Samtec's current ET60T print (Revision Y, sheet date 8/30/2023); sha256 bdd47d4c matches suddendocs.samtec.com/prints/et60t-xxx-x-xx-xxx-x-rx-x-x-mkt.pdf fetched 2026-10-27. Recommended layout checked against et60t-xxx-x-xx-xxx-x-rx-x-x-footprint.pdf Revision P (sheets 1, 3, 8)
  • ✓Part number decoded from the sheet 1 callout: S03 = split power, 3 positions, on the left; 5 signal rows; 05 positions per row; 000 = no power on the right; S = 30 µin gold; R1 = tail for .062 in PCB; S = side guide post; no -H (hot swap)
  • ✓Signal numbering per Fig 4 (p.3), Fig 18 (p.11) and footprint Fig 14: 01 at the left end of the row nearest the board front edge, left to right, rows away from the edge (01 / 03 / 15 labels). Footprint pads 1-25 follow that order (pad 1 at x 11.14, y 3.49 nearest the edge). Renamed signal pins from the board symbol's 31-55 to 01-25
  • ✓Split power per Fig 18 (p.11) and footprint Fig 14: P01L, P01R, P02L, P02R, P03L, P03R left to right, 3.50 mm between the halves, 8.00 mm between positions, 5 tails per half. Pads P1_1-5 / P1_6-10 / P2_1-5 / P2_6-10 / P3_1-5 / P3_6-10 renamed from 1-30 to P01L / P01R / P02L / P02R / P03L / P03R
  • ✓Pin types: all passive (connector contacts); power tails were power_in
  • ✓Footprint vs recommended layout: signal 5 x 5 at 2.00 mm pitch, drill 0.70 (Samtec 0.70 +-0.05 finished PTH), pad 1.00 vs 0.93; power drill 1.02 (Samtec 1.02 +-0.05), pad 1.53 vs 1.25, rows at 2.50 mm; left peg to P01L 5.50, P03R to the first signal column 5.64, last signal column to right peg 5.57, peg centreline to the signal row nearest the edge 4.99, peg centreline on the middle power row; PCB-edge line on Dwgs.User 7.90 mm from the peg centreline as Samtec sheet 1: all match
  • ✓3D body 51.21 x 29.25 x 14.48 mm against the print: envelope 3.32 / 3.68 REF outside the pegs (51.21), depth 29.25 REF, overhang 15.75 REF beyond the front edge (model: 22.15 - (-1.5) - 7.90 = 15.75), 10.00 above the board and 4.48 below vs 4.46 REF
  • •DigiKey and Mouser do not list this configuration
  • ✓Guide-post holes set to Samtec's 3.20 mm NPTH (2 places, recommended PCB layout rev P); the source board used 3.40 mm
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify 0.2.0: all checks pass
Evidenceproduct print (Samtec)recommended PCB layout (Samtec)
Verified files✓ et60t-s03-5-05-000-s-r1-s.kicad_sym✓ et60t-s03-5-05-000-s-r1-s.kicad_mod✓ et60t-s03-5-05-000-s-r1-s.step
9 Oct 2026Claude (AI build)Datasheet pins not matched to a symbol pin: P01L, P01R, P02L, P02R, P03L, P03Rsuperseded
reviewfor all variants
  • •Datasheet pins not matched to a symbol pin: P01L, P01R, P02L, P02R, P03L, P03R
9 Oct 2026Claude (AI build)Footprint: a "PCB Edge" line on Dwgs.User marks the board front edge 7.90 mm from the peg ...superseded
reviewfor all variants
  • •Footprint: a "PCB Edge" line on Dwgs.User marks the board front edge 7.90 mm from the peg centreline (Samtec recommended PCB layout ET60T-XXX-X-XX-XXX-X-RX-X-X-FOOTPRINT rev P, sheet 1); documentation only, nothing is cut.
9 Oct 2026Claude (AI build)Datasheet is the Samtec ET60T series print, not a part-specific drawing; confirm the S03-5...superseded
reviewfor all variants
  • •Datasheet is the Samtec ET60T series print, not a part-specific drawing; confirm the S03-5-05-000-S-R1-S options against its ordering tables.
9 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • ✓55 of 55 pins described from the datasheet (adom-ds2sf, page-cited)
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! et60t-s03-5-05-000-s-r1-s.kicad_sym! et60t-s03-5-05-000-s-r1-s.kicad_mod✓ et60t-s03-5-05-000-s-r1-s.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
← Commit history

Publish 0.1.1

Caleb ·15cfa50ced ·1d ago ·parent a4b5258
9 files changed +1946−566
README.md+57−57et60t-s03-5-05-000-s-r1-s-hero.glbet60t-s03-5-05-000-s-r1-s-hero.overlay.json+1299et60t-s03-5-05-000-s-r1-s.kicad_mod+5−5et60t-s03-5-05-000-s-r1-s.kicad_sym+85−85et60t-s03-5-05-000-s-r1-s.lbr+112−110package.json+151−154page.json+154−151verification.json+83−4
README.md+57−57
@@ -4,67 +4,67 @@  **Samtec** · Samtec ET60T series board connector (R1 right-angle) · Samtec_ET60T-S03-5-05-000-S-R1-S -ET60T-S03-5-05-000-S-R1-S from Samtec, in a Samtec_ET60T-S03-5-05-000-S-R1-S. Symbol, footprint and 3D model are the ones used on Adom board designs (3D model: Adom-generated 3D model built from the datasheet dimensions (simplified; CC-BY-SA 4.0); no vendor CAD is redistributed). Pin functions are extracted from the manufacturer datasheet with page references. **Staged for validation: see the open items in the verification log above.**+ET60T-S03-5-05-000-S-R1-S from Samtec, in a Samtec_ET60T-S03-5-05-000-S-R1-S. Symbol, footprint and 3D model are the ones used on Adom board designs (3D model: Adom-generated 3D model built from the datasheet dimensions (simplified; CC-BY-SA 4.0); no vendor CAD is redistributed). Pin functions are extracted from the manufacturer datasheet with page references.  ## Pinout  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | 31 | passive | Signal contact 01 in the 5-row x 5-position signal field (2.54 mm pitch, 0.64 mm sq through-hole tail). Function user-defined by the mating backplane; datasheet gives no electrical assignment. [datasheet p.1] |-| 2 | 32 | passive | Signal contact 02 in the 5x5 signal field. Function user-defined. [datasheet p.1] |-| 3 | 33 | passive | Signal contact 03 in the 5x5 signal field. Function user-defined. [datasheet p.1] |-| 4 | 34 | passive | Signal contact 04 in the 5x5 signal field. Function user-defined. [datasheet p.1] |-| 5 | 35 | passive | Signal contact 05 in the 5x5 signal field. Function user-defined. [datasheet p.1] |-| 6 | 36 | passive | Signal contact 06 in the 5x5 signal field. Function user-defined. [datasheet p.1] |-| 7 | 37 | passive | Signal contact 07 in the 5x5 signal field. Function user-defined. [datasheet p.1] |-| 8 | 38 | passive | Signal contact 08 in the 5x5 signal field. Function user-defined. [datasheet p.1] |-| 9 | 39 | passive | Signal contact 09 in the 5x5 signal field. Function user-defined. [datasheet p.1] |-| 10 | 40 | passive | Signal contact 10 in the 5x5 signal field. Function user-defined. [datasheet p.1] |-| 11 | 41 | passive | Signal contact 11 in the 5x5 signal field. Function user-defined. [datasheet p.1] |-| 12 | 42 | passive | Signal contact 12 in the 5x5 signal field. Function user-defined. [datasheet p.1] |-| 13 | 43 | passive | Signal contact 13 in the 5x5 signal field. Function user-defined. [datasheet p.1] |-| 14 | 44 | passive | Signal contact 14 in the 5x5 signal field. Function user-defined. [datasheet p.1] |-| 15 | 45 | passive | Signal contact 15 in the 5x5 signal field. Function user-defined. [datasheet p.1] |-| 16 | 46 | passive | Signal contact 16 in the 5x5 signal field. Function user-defined. [datasheet p.1] |-| 17 | 47 | passive | Signal contact 17 in the 5x5 signal field. Function user-defined. [datasheet p.1] |-| 18 | 48 | passive | Signal contact 18 in the 5x5 signal field. Function user-defined. [datasheet p.1] |-| 19 | 49 | passive | Signal contact 19 in the 5x5 signal field. Function user-defined. [datasheet p.1] |-| 20 | 50 | passive | Signal contact 20 in the 5x5 signal field. Function user-defined. [datasheet p.1] |-| 21 | 51 | passive | Signal contact 21 in the 5x5 signal field. Function user-defined. [datasheet p.1] |-| 22 | 52 | passive | Signal contact 22 in the 5x5 signal field. Function user-defined. [datasheet p.1] |-| 23 | 53 | passive | Signal contact 23 in the 5x5 signal field. Function user-defined. [datasheet p.1] |-| 24 | 54 | passive | Signal contact 24 in the 5x5 signal field. Function user-defined. [datasheet p.1] |-| 25 | 55 | passive | Signal contact 25 in the 5x5 signal field. Function user-defined. [datasheet p.1] |-| P1_1 | 1 | power_in | Contact 1; position numbering per the manufacturer drawing. [from symbol] |-| P1_2 | 2 | power_in | Contact 2; position numbering per the manufacturer drawing. [from symbol] |-| P1_3 | 3 | power_in | Contact 3; position numbering per the manufacturer drawing. [from symbol] |-| P1_4 | 4 | power_in | Contact 4; position numbering per the manufacturer drawing. [from symbol] |-| P1_5 | 5 | power_in | Contact 5; position numbering per the manufacturer drawing. [from symbol] |-| P1_6 | 6 | power_in | Contact 6; position numbering per the manufacturer drawing. [from symbol] |-| P1_7 | 7 | power_in | Contact 7; position numbering per the manufacturer drawing. [from symbol] |-| P1_8 | 8 | power_in | Contact 8; position numbering per the manufacturer drawing. [from symbol] |-| P1_9 | 9 | power_in | Contact 9; position numbering per the manufacturer drawing. [from symbol] |-| P1_10 | 10 | power_in | Contact 10; position numbering per the manufacturer drawing. [from symbol] |-| P2_1 | 11 | power_in | Contact 11; position numbering per the manufacturer drawing. [from symbol] |-| P2_2 | 12 | power_in | Contact 12; position numbering per the manufacturer drawing. [from symbol] |-| P2_3 | 13 | power_in | Contact 13; position numbering per the manufacturer drawing. [from symbol] |-| P2_4 | 14 | power_in | Contact 14; position numbering per the manufacturer drawing. [from symbol] |-| P2_5 | 15 | power_in | Contact 15; position numbering per the manufacturer drawing. [from symbol] |-| P2_6 | 16 | power_in | Contact 16; position numbering per the manufacturer drawing. [from symbol] |-| P2_7 | 17 | power_in | Contact 17; position numbering per the manufacturer drawing. [from symbol] |-| P2_8 | 18 | power_in | Contact 18; position numbering per the manufacturer drawing. [from symbol] |-| P2_9 | 19 | power_in | Contact 19; position numbering per the manufacturer drawing. [from symbol] |-| P2_10 | 20 | power_in | Contact 20; position numbering per the manufacturer drawing. [from symbol] |-| P3_1 | 21 | power_in | Contact 21; position numbering per the manufacturer drawing. [from symbol] |-| P3_2 | 22 | power_in | Contact 22; position numbering per the manufacturer drawing. [from symbol] |-| P3_3 | 23 | power_in | Contact 23; position numbering per the manufacturer drawing. [from symbol] |-| P3_4 | 24 | power_in | Contact 24; position numbering per the manufacturer drawing. [from symbol] |-| P3_5 | 25 | power_in | Contact 25; position numbering per the manufacturer drawing. [from symbol] |-| P3_6 | 26 | power_in | Contact 26; position numbering per the manufacturer drawing. [from symbol] |-| P3_7 | 27 | power_in | Contact 27; position numbering per the manufacturer drawing. [from symbol] |-| P3_8 | 28 | power_in | Contact 28; position numbering per the manufacturer drawing. [from symbol] |-| P3_9 | 29 | power_in | Contact 29; position numbering per the manufacturer drawing. [from symbol] |-| P3_10 | 30 | power_in | Contact 30; position numbering per the manufacturer drawing. [from symbol] |+| 1 | 01 | passive | Signal contact 01; numbering per the manufacturer drawing: 5 rows x 5 positions at 2.00 mm pitch, 01 at the left end of the row nearest the board front edge, counting left to right along each row and then row by row away from the edge (Fig 4). [datasheet p.3] |+| 2 | 02 | passive | Signal contact 02; numbering per the manufacturer drawing. [datasheet p.3] |+| 3 | 03 | passive | Signal contact 03; numbering per the manufacturer drawing. [datasheet p.3] |+| 4 | 04 | passive | Signal contact 04; numbering per the manufacturer drawing. [datasheet p.3] |+| 5 | 05 | passive | Signal contact 05; numbering per the manufacturer drawing. [datasheet p.3] |+| 6 | 06 | passive | Signal contact 06; numbering per the manufacturer drawing. [datasheet p.3] |+| 7 | 07 | passive | Signal contact 07; numbering per the manufacturer drawing. [datasheet p.3] |+| 8 | 08 | passive | Signal contact 08; numbering per the manufacturer drawing. [datasheet p.3] |+| 9 | 09 | passive | Signal contact 09; numbering per the manufacturer drawing. [datasheet p.3] |+| 10 | 10 | passive | Signal contact 10; numbering per the manufacturer drawing. [datasheet p.3] |+| 11 | 11 | passive | Signal contact 11; numbering per the manufacturer drawing. [datasheet p.3] |+| 12 | 12 | passive | Signal contact 12; numbering per the manufacturer drawing. [datasheet p.3] |+| 13 | 13 | passive | Signal contact 13; numbering per the manufacturer drawing. [datasheet p.3] |+| 14 | 14 | passive | Signal contact 14; numbering per the manufacturer drawing. [datasheet p.3] |+| 15 | 15 | passive | Signal contact 15; numbering per the manufacturer drawing. [datasheet p.3] |+| 16 | 16 | passive | Signal contact 16; numbering per the manufacturer drawing. [datasheet p.3] |+| 17 | 17 | passive | Signal contact 17; numbering per the manufacturer drawing. [datasheet p.3] |+| 18 | 18 | passive | Signal contact 18; numbering per the manufacturer drawing. [datasheet p.3] |+| 19 | 19 | passive | Signal contact 19; numbering per the manufacturer drawing. [datasheet p.3] |+| 20 | 20 | passive | Signal contact 20; numbering per the manufacturer drawing. [datasheet p.3] |+| 21 | 21 | passive | Signal contact 21; numbering per the manufacturer drawing. [datasheet p.3] |+| 22 | 22 | passive | Signal contact 22; numbering per the manufacturer drawing. [datasheet p.3] |+| 23 | 23 | passive | Signal contact 23; numbering per the manufacturer drawing. [datasheet p.3] |+| 24 | 24 | passive | Signal contact 24; numbering per the manufacturer drawing. [datasheet p.3] |+| 25 | 25 | passive | Signal contact 25; numbering per the manufacturer drawing. [datasheet p.3] |+| P1_1 | P01L | passive | Split power contact P01L (position P01, left half), tail 1 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11] |+| P1_2 | P01L | passive | Split power contact P01L (position P01, left half), tail 2 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11] |+| P1_3 | P01L | passive | Split power contact P01L (position P01, left half), tail 3 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11] |+| P1_4 | P01L | passive | Split power contact P01L (position P01, left half), tail 4 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11] |+| P1_5 | P01L | passive | Split power contact P01L (position P01, left half), tail 5 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11] |+| P1_6 | P01R | passive | Split power contact P01R (position P01, right half), tail 1 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11] |+| P1_7 | P01R | passive | Split power contact P01R (position P01, right half), tail 2 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11] |+| P1_8 | P01R | passive | Split power contact P01R (position P01, right half), tail 3 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11] |+| P1_9 | P01R | passive | Split power contact P01R (position P01, right half), tail 4 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11] |+| P1_10 | P01R | passive | Split power contact P01R (position P01, right half), tail 5 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11] |+| P2_1 | P02L | passive | Split power contact P02L (position P02, left half), tail 1 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11] |+| P2_2 | P02L | passive | Split power contact P02L (position P02, left half), tail 2 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11] |+| P2_3 | P02L | passive | Split power contact P02L (position P02, left half), tail 3 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11] |+| P2_4 | P02L | passive | Split power contact P02L (position P02, left half), tail 4 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11] |+| P2_5 | P02L | passive | Split power contact P02L (position P02, left half), tail 5 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11] |+| P2_6 | P02R | passive | Split power contact P02R (position P02, right half), tail 1 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11] |+| P2_7 | P02R | passive | Split power contact P02R (position P02, right half), tail 2 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11] |+| P2_8 | P02R | passive | Split power contact P02R (position P02, right half), tail 3 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11] |+| P2_9 | P02R | passive | Split power contact P02R (position P02, right half), tail 4 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11] |+| P2_10 | P02R | passive | Split power contact P02R (position P02, right half), tail 5 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11] |+| P3_1 | P03L | passive | Split power contact P03L (position P03, left half), tail 1 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11] |+| P3_2 | P03L | passive | Split power contact P03L (position P03, left half), tail 2 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11] |+| P3_3 | P03L | passive | Split power contact P03L (position P03, left half), tail 3 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11] |+| P3_4 | P03L | passive | Split power contact P03L (position P03, left half), tail 4 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11] |+| P3_5 | P03L | passive | Split power contact P03L (position P03, left half), tail 5 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11] |+| P3_6 | P03R | passive | Split power contact P03R (position P03, right half), tail 1 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11] |+| P3_7 | P03R | passive | Split power contact P03R (position P03, right half), tail 2 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11] |+| P3_8 | P03R | passive | Split power contact P03R (position P03, right half), tail 3 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11] |+| P3_9 | P03R | passive | Split power contact P03R (position P03, right half), tail 4 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11] |+| P3_10 | P03R | passive | Split power contact P03R (position P03, right half), tail 5 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11] |  ## Key specifications @@ -85,7 +85,7 @@ ET60T-S03-5-05-000-S-R1-S from Samtec, in a Samtec_ET60T-S03-5-05-000-S-R1-S. Sy  ## Provenance -- **Datasheet:** [Samtec datasheet](https://suddendocs.samtec.com/prints/et60t-xxx-x-xx-xxx-x-rx-x-x-mkt.pdf) (sha256 `bdd47d4c66c7174d`, retrieved 2026-10-09, tier: mfr)+- **Datasheet:** [Samtec ET60T-XXX-X-XX-XXX-X-RX-X-X product print](https://suddendocs.samtec.com/prints/et60t-xxx-x-xx-xxx-x-rx-x-x-mkt.pdf) (ET60T-XXX-X-XX-XXX-X-RX-X-X print, Revision Y (sheet date 8/30/2023), sha256 `bdd47d4c66c7174d`, retrieved 2026-10-27, tier: mfr) - **CAD:** Footprint and symbol as used on Adom board designs; 3D model: Adom-generated 3D model built from the datasheet dimensions (simplified; CC-BY-SA 4.0); no vendor CAD is redistributed. - **Pins:** KiCad symbol from the source board + adom-ds2sf datasheet extraction (claude-opus-4-7).
et60t-s03-5-05-000-s-r1-s-hero.glbadded
⋯ 1 unchanged line ⋯
et60t-s03-5-05-000-s-r1-s-hero.overlay.jsonadded+1299
@@ -0,0 +1,1299 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "ET60T-S03-5-05-000-S-R1-S",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 55,+      "span_mm": 34.67,+      "dash_mm": 0.45,+      "gap_mm": 0.27,+      "pad_stroke_mm": 0.09+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 6,+      "pin1": {+        "source": "added dot (AI)",+        "pad": "1",+        "center_mm": [+          11.14,+          4.41+        ],+        "r_mm": 0.22+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 55,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 16+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.167,+    "tolerance_mm": 2.752,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -21.165,+      26.375,+      -0.154,+      3.154+    ],+    "pads_bbox_mm": [+      -14.765,+      19.64,+      -4.265,+      7.265+    ],+    "seating_z_mm": -4.48+  },+  "sources": {+    "glb": "et60t-s03-5-05-000-s-r1-s.glb",+    "glb_sha256": "762add7132af6d6364177e2a4ff1f686a3ad8dac9db36269dc62cc91f33352f7",+    "footprint": "et60t-s03-5-05-000-s-r1-s.kicad_mod",+    "footprint_sha256": "d955845871d10a2ce1da5cd033b2559b3aadc08657e4ecda99fe23722d6c6212",+    "pins": "page.json component.pins",+    "pins_sha256": "e3905ba41e367b8eaee0b0c055bfd14309ccef941f7ae866b2aa2fcb66a413a8"+  },+  "generator": "adom-wiki 1.8.0 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "01",+      "x": 11.14,+      "y": 4.78,+      "align": "right",+      "vertical": true,+      "h": 0.6+    },+    {+      "pad": "2",+      "text": "02",+      "x": 13.14,+      "y": 4.14,+      "align": "right",+      "vertical": true,+      "h": 0.6+    },+    {+      "pad": "3",+      "text": "03",+      "x": 15.14,+      "y": 4.14,+      "align": "right",+      "vertical": true,+      "h": 0.6+    },+    {+      "pad": "4",+      "text": "04",+      "x": 17.14,+      "y": 4.14,+      "align": "right",+      "vertical": true,+      "h": 0.6+    },+    {+      "pad": "5",+      "text": "05",+      "x": 19.79,+      "y": 3.49,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "6",+      "text": "06",+      "x": 11.14,+      "y": 2.14,+      "align": "right",+      "vertical": true,+      "h": 0.6+    },+    {+      "pad": "7",+      "text": "07",+      "x": 13.79,+      "y": 1.49,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "8",+      "text": "08",+      "x": 15.79,+      "y": 1.49,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "9",+      "text": "09",+      "x": 17.79,+      "y": 1.49,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "10",+      "text": "10",+      "x": 19.79,+      "y": 1.49,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "11",+      "text": "11",+      "x": 11.79,+      "y": -0.51,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "12",+      "text": "12",+      "x": 13.79,+      "y": -0.51,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "13",+      "text": "13",+      "x": 15.79,+      "y": -0.51,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "14",+      "text": "14",+      "x": 17.79,+      "y": -0.51,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "15",+      "text": "15",+      "x": 19.79,+      "y": -0.51,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "16",+      "text": "16",+      "x": 11.79,+      "y": -2.51,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "17",+      "text": "17",+      "x": 13.79,+      "y": -2.51,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "18",+      "text": "18",+      "x": 15.79,+      "y": -2.51,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "19",+      "text": "19",+      "x": 17.79,+      "y": -2.51,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "20",+      "text": "20",+      "x": 19.79,+      "y": -2.51,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "21",+      "text": "21",+      "x": 11.14,+      "y": -5.16,+      "align": "left",+      "vertical": true,+      "h": 0.6+    },+    {+      "pad": "22",+      "text": "22",+      "x": 13.79,+      "y": -4.51,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "23",+      "text": "23",+      "x": 15.79,+      "y": -4.51,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "24",+      "text": "24",+      "x": 17.79,+      "y": -4.51,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "25",+      "text": "25",+      "x": 19.79,+      "y": -4.51,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "P1_1",+      "text": "P01L",+      "x": -14.915,+      "y": -6.5,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "P1_2",+      "text": "P01L",+      "x": -14.915,+      "y": -4.0,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "P1_3",+      "text": "P01L",+      "x": -14.915,+      "y": -1.5,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "P1_4",+      "text": "P01L",+      "x": -14.915,+      "y": 1.0,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "P1_5",+      "text": "P01L",+      "x": -14.915,+      "y": 3.5,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "P1_6",+      "text": "P01R",+      "x": -10.5,+      "y": -7.415,+      "align": "left",+      "vertical": true,+      "h": 0.6+    },+    {+      "pad": "P1_7",+      "text": "P01R",+      "x": -11.415,+      "y": -4.0,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "P1_8",+      "text": "P01R",+      "x": -11.415,+      "y": -1.5,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "P1_9",+      "text": "P01R",+      "x": -11.415,+      "y": 1.0,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "P1_10",+      "text": "P01R",+      "x": -10.5,+      "y": 4.415,+      "align": "right",+      "vertical": true,+      "h": 0.6+    },+    {+      "pad": "P2_1",+      "text": "P02L",+      "x": -6.0,+      "y": -7.415,+      "align": "left",+      "vertical": true,+      "h": 0.6+    },+    {+      "pad": "P2_2",+      "text": "P02L",+      "x": -6.915,+      "y": -4.0,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "P2_3",+      "text": "P02L",+      "x": -6.915,+      "y": -1.5,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "P2_4",+      "text": "P02L",+      "x": -6.915,+      "y": 1.0,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "P2_5",+      "text": "P02L",+      "x": -6.0,+      "y": 4.415,+      "align": "right",+      "vertical": true,+      "h": 0.6+    },+    {+      "pad": "P2_6",+      "text": "P02R",+      "x": -2.5,+      "y": -7.415,+      "align": "left",+      "vertical": true,+      "h": 0.6+    },+    {+      "pad": "P2_7",+      "text": "P02R",+      "x": -2.5,+      "y": -4.915,+      "align": "left",+      "vertical": true,+      "h": 0.6+    },+    {+      "pad": "P2_8",+      "text": "P02R",+      "x": -3.415,+      "y": -1.5,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "P2_9",+      "text": "P02R",+      "x": -2.5,+      "y": 1.915,+      "align": "right",+      "vertical": true,+      "h": 0.6+    },+    {+      "pad": "P2_10",+      "text": "P02R",+      "x": -2.5,+      "y": 4.415,+      "align": "right",+      "vertical": true,+      "h": 0.6+    },+    {+      "pad": "P3_1",+      "text": "P03L",+      "x": 2.0,+      "y": -7.415,+      "align": "left",+      "vertical": true,+      "h": 0.6+    },+    {+      "pad": "P3_2",+      "text": "P03L",+      "x": 2.0,+      "y": -4.915,+      "align": "left",+      "vertical": true,+      "h": 0.6+    },+    {+      "pad": "P3_3",+      "text": "P03L",+      "x": 1.085,+      "y": -1.5,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "P3_4",+      "text": "P03L",+      "x": 2.0,+      "y": 1.915,+      "align": "right",+      "vertical": true,+      "h": 0.6+    },+    {+      "pad": "P3_5",+      "text": "P03L",+      "x": 2.0,+      "y": 4.415,+      "align": "right",+      "vertical": true,+      "h": 0.6+    },+    {+      "pad": "P3_6",+      "text": "P03R",+      "x": 5.5,+      "y": -7.415,+      "align": "left",+      "vertical": true,+      "h": 0.6+    },+    {+      "pad": "P3_7",+      "text": "P03R",+      "x": 5.5,+      "y": -4.915,+      "align": "left",+      "vertical": true,+      "h": 0.6+    },+    {+      "pad": "P3_8",+      "text": "P03R",+      "x": 6.415,+      "y": -1.5,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "P3_9",+      "text": "P03R",+      "x": 5.5,+      "y": 1.915,+      "align": "right",+      "vertical": true,+      "h": 0.6+    },+    {+      "pad": "P3_10",+      "text": "P03R",+      "x": 5.5,+      "y": 4.415,+      "align": "right",+      "vertical": true,+      "h": 0.6+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "rect",+      "center_mm": [+        11.14,+        3.49+      ],+      "size_mm": [+        1.0,+        1.0+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "circle",+      "center_mm": [+        13.14,+        3.49+      ],+      "size_mm": [+        1.0,+        1.0+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "circle",+      "center_mm": [+        15.14,+        3.49+      ],+      "size_mm": [+        1.0,+        1.0+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "circle",+      "center_mm": [+        17.14,+        3.49+      ],+      "size_mm": [+        1.0,+        1.0+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "circle",+      "center_mm": [+        19.14,+        3.49+      ],+      "size_mm": [+        1.0,+        1.0+      ],+      "rot": 0.0+    },+    {+      "number": "6",+      "shape": "circle",+      "center_mm": [+        11.14,+        1.49+      ],+      "size_mm": [+        1.0,+        1.0+      ],+      "rot": 0.0+    },+    {+      "number": "7",+      "shape": "circle",+      "center_mm": [+        13.14,+        1.49+      ],+      "size_mm": [+        1.0,+        1.0+      ],+      "rot": 0.0+    },+    {+      "number": "8",+      "shape": "circle",+      "center_mm": [+        15.14,+        1.49+      ],+      "size_mm": [+        1.0,+        1.0+      ],+      "rot": 0.0+    },+    {+      "number": "9",+      "shape": "circle",+      "center_mm": [+        17.14,+        1.49+      ],+      "size_mm": [+        1.0,+        1.0+      ],+      "rot": 0.0+    },+    {+      "number": "10",+      "shape": "circle",+      "center_mm": [+        19.14,+        1.49+      ],+      "size_mm": [+        1.0,+        1.0+      ],+      "rot": 0.0+    },+    {+      "number": "11",+      "shape": "circle",+      "center_mm": [+        11.14,+        -0.51+      ],+      "size_mm": [+        1.0,+        1.0+      ],+      "rot": 0.0+    },+    {+      "number": "12",+      "shape": "circle",+      "center_mm": [+        13.14,+        -0.51+      ],+      "size_mm": [+        1.0,+        1.0+      ],+      "rot": 0.0+    },+    {+      "number": "13",+      "shape": "circle",+      "center_mm": [+        15.14,+        -0.51+      ],+      "size_mm": [+        1.0,+        1.0+      ],+      "rot": 0.0+    },+    {+      "number": "14",+      "shape": "circle",+      "center_mm": [+        17.14,+        -0.51+      ],+      "size_mm": [+        1.0,+        1.0+      ],+      "rot": 0.0+    },+    {+      "number": "15",+      "shape": "circle",+      "center_mm": [+        19.14,+        -0.51+      ],+      "size_mm": [+        1.0,+        1.0+      ],+      "rot": 0.0+    },+    {+      "number": "16",+      "shape": "circle",+      "center_mm": [+        11.14,+        -2.51+      ],+      "size_mm": [+        1.0,+        1.0+      ],+      "rot": 0.0+    },+    {+      "number": "17",+      "shape": "circle",+      "center_mm": [+        13.14,+        -2.51+      ],+      "size_mm": [+        1.0,+        1.0+      ],+      "rot": 0.0+    },+    {+      "number": "18",+      "shape": "circle",+      "center_mm": [+        15.14,+        -2.51+      ],+      "size_mm": [+        1.0,+        1.0+      ],+      "rot": 0.0+    },+    {+      "number": "19",+      "shape": "circle",+      "center_mm": [+        17.14,+        -2.51+      ],+      "size_mm": [+        1.0,+        1.0+      ],+      "rot": 0.0+    },+    {+      "number": "20",+      "shape": "circle",+      "center_mm": [+        19.14,+        -2.51+      ],+      "size_mm": [+        1.0,+        1.0+      ],+      "rot": 0.0+    },+    {+      "number": "21",+      "shape": "circle",+      "center_mm": [+        11.14,+        -4.51+      ],+      "size_mm": [+        1.0,+        1.0+      ],+      "rot": 0.0+    },+    {+      "number": "22",+      "shape": "circle",+      "center_mm": [+        13.14,+        -4.51+      ],+      "size_mm": [+        1.0,+        1.0+      ],+      "rot": 0.0+    },+    {+      "number": "23",+      "shape": "circle",+      "center_mm": [+        15.14,+        -4.51+      ],+      "size_mm": [+        1.0,+        1.0+      ],+      "rot": 0.0+    },+    {+      "number": "24",+      "shape": "circle",+      "center_mm": [+        17.14,+        -4.51+      ],+      "size_mm": [+        1.0,+        1.0+      ],+      "rot": 0.0+    },+    {+      "number": "25",+      "shape": "circle",+      "center_mm": [+        19.14,+        -4.51+      ],+      "size_mm": [+        1.0,+        1.0+      ],+      "rot": 0.0+    },+    {+      "number": "P1_1",+      "shape": "circle",+      "center_mm": [+        -14.0,+        -6.5+      ],+      "size_mm": [+        1.53,+        1.53+      ],+      "rot": 0.0+    },+    {+      "number": "P1_2",+      "shape": "circle",+      "center_mm": [+        -14.0,+        -4.0+      ],+      "size_mm": [+        1.53,+        1.53+      ],+      "rot": 0.0+    },+    {+      "number": "P1_3",+      "shape": "circle",+      "center_mm": [+        -14.0,+        -1.5+      ],+      "size_mm": [+        1.53,+        1.53+      ],+      "rot": 0.0+    },+    {+      "number": "P1_4",+      "shape": "circle",+      "center_mm": [+        -14.0,+        1.0+      ],+      "size_mm": [+        1.53,+        1.53+      ],+      "rot": 0.0+    },+    {+      "number": "P1_5",+      "shape": "circle",+      "center_mm": [+        -14.0,+        3.5+      ],+      "size_mm": [+        1.53,+        1.53+      ],+      "rot": 0.0+    },+    {+      "number": "P1_6",+      "shape": "circle",+      "center_mm": [+        -10.5,+        -6.5+      ],+      "size_mm": [+        1.53,+        1.53+      ],+      "rot": 180.0+    },+    {+      "number": "P1_7",+      "shape": "circle",+      "center_mm": [+        -10.5,+        -4.0+      ],+      "size_mm": [+        1.53,+        1.53+      ],+      "rot": 180.0+    },+    {+      "number": "P1_8",+      "shape": "circle",+      "center_mm": [+        -10.5,+        -1.5+      ],+      "size_mm": [+        1.53,+        1.53+      ],+      "rot": 180.0+    },+    {+      "number": "P1_9",+      "shape": "circle",+      "center_mm": [+        -10.5,+        1.0+      ],+      "size_mm": [+        1.53,+        1.53+      ],+      "rot": 180.0+    },+    {+      "number": "P1_10",+      "shape": "circle",+      "center_mm": [+        -10.5,+        3.5+      ],+      "size_mm": [+        1.53,+        1.53+      ],+      "rot": 180.0+    },+    {+      "number": "P2_1",+      "shape": "circle",+      "center_mm": [+        -6.0,+        -6.5+      ],+      "size_mm": [+        1.53,+        1.53+      ],+      "rot": 0.0+    },+    {+      "number": "P2_2",+      "shape": "circle",+      "center_mm": [+        -6.0,+        -4.0+      ],+      "size_mm": [+        1.53,+        1.53+      ],+      "rot": 0.0+    },+    {+      "number": "P2_3",+      "shape": "circle",+      "center_mm": [+        -6.0,+        -1.5+      ],+      "size_mm": [+        1.53,+        1.53+      ],+      "rot": 0.0+    },+    {+      "number": "P2_4",+      "shape": "circle",+      "center_mm": [+        -6.0,+        1.0+      ],+      "size_mm": [+        1.53,+        1.53+      ],+      "rot": 0.0+    },+    {+      "number": "P2_5",+      "shape": "circle",+      "center_mm": [+        -6.0,+        3.5+      ],+      "size_mm": [+        1.53,+        1.53+      ],+      "rot": 0.0+    },+    {+      "number": "P2_6",+      "shape": "circle",+      "center_mm": [+        -2.5,+        -6.5+      ],+      "size_mm": [+        1.53,+        1.53+      ],+      "rot": 180.0+    },+    {+      "number": "P2_7",+      "shape": "circle",+      "center_mm": [+        -2.5,+        -4.0+      ],+      "size_mm": [+        1.53,+        1.53+      ],+      "rot": 180.0+    },+    {+      "number": "P2_8",+      "shape": "circle",+      "center_mm": [+        -2.5,+        -1.5+      ],+      "size_mm": [+        1.53,+        1.53+      ],+      "rot": 180.0+    },+    {+      "number": "P2_9",+      "shape": "circle",+      "center_mm": [+        -2.5,+        1.0+      ],+      "size_mm": [+        1.53,+        1.53+      ],+      "rot": 180.0+    },+    {+      "number": "P2_10",+      "shape": "circle",+      "center_mm": [+        -2.5,+        3.5+      ],+      "size_mm": [+        1.53,+        1.53+      ],+      "rot": 180.0+    },+    {+      "number": "P3_1",+      "shape": "circle",+      "center_mm": [+        2.0,+        -6.5+      ],+      "size_mm": [+        1.53,+        1.53+      ],+      "rot": 0.0+    },+    {+      "number": "P3_2",+      "shape": "circle",+      "center_mm": [+        2.0,+        -4.0+      ],+      "size_mm": [+        1.53,+        1.53+      ],+      "rot": 0.0+    },+    {+      "number": "P3_3",+      "shape": "circle",+      "center_mm": [+        2.0,+        -1.5+      ],+      "size_mm": [+        1.53,+        1.53+      ],+      "rot": 0.0+    },+    {+      "number": "P3_4",+      "shape": "circle",+      "center_mm": [+        2.0,+        1.0+      ],+      "size_mm": [+        1.53,+        1.53+      ],+      "rot": 0.0+    },+    {+      "number": "P3_5",+      "shape": "circle",+      "center_mm": [+        2.0,+        3.5+      ],+      "size_mm": [+        1.53,+        1.53+      ],+      "rot": 0.0+    },+    {+      "number": "P3_6",+      "shape": "circle",+      "center_mm": [+        5.5,+        -6.5+      ],+      "size_mm": [+        1.53,+        1.53+      ],+      "rot": 180.0+    },+    {+      "number": "P3_7",+      "shape": "circle",+      "center_mm": [+        5.5,+        -4.0+      ],+      "size_mm": [+        1.53,+        1.53+      ],+      "rot": 180.0+    },+    {+      "number": "P3_8",+      "shape": "circle",+      "center_mm": [+        5.5,+        -1.5+      ],+      "size_mm": [+        1.53,+        1.53+      ],+      "rot": 180.0+    },+    {+      "number": "P3_9",+      "shape": "circle",+      "center_mm": [+        5.5,+        1.0+      ],+      "size_mm": [+        1.53,+        1.53+      ],+      "rot": 180.0+    },+    {+      "number": "P3_10",+      "shape": "circle",+      "center_mm": [+        5.5,+        3.5+      ],+      "size_mm": [+        1.53,+        1.53+      ],+      "rot": 180.0+    }+  ]+}
et60t-s03-5-05-000-s-r1-s.kicad_mod+5−5
@@ -20,7 +20,7 @@ 			(justify) 		) 	)-	(property "Datasheet" ""+	(property "Datasheet" "https://suddendocs.samtec.com/prints/et60t-xxx-x-xx-xxx-x-rx-x-x-mkt.pdf" 		(at 0 0 180) 		(layer F.Fab) 		(hide yes)@@ -226,15 +226,15 @@ 	) 	(pad "" np_thru_hole circle 		(at -19.5 -1.5)-		(size 3.4 3.4)-		(drill 3.4)+		(size 3.2 3.2)+		(drill 3.2) 		(layers "*.Cu" "*.Mask") 		(clearance 0.5) 	) 	(pad "" np_thru_hole circle 		(at 24.71 -1.5)-		(size 3.4 3.4)-		(drill 3.4)+		(size 3.2 3.2)+		(drill 3.2) 		(layers "*.Cu" "*.Mask") 		(clearance 0.3) 	)
et60t-s03-5-05-000-s-r1-s.kicad_sym+85−85
@@ -83,7 +83,7 @@ 			(pin passive line 				(at -13.97 11.43 0) 				(length 5.08)-				(name "31"+				(name "01" 					(effects 						(font (size 1.016 1.016)) 					)@@ -97,7 +97,7 @@ 			(pin passive line 				(at -13.97 8.89 0) 				(length 5.08)-				(name "32"+				(name "02" 					(effects 						(font (size 1.016 1.016)) 					)@@ -111,7 +111,7 @@ 			(pin passive line 				(at -13.97 6.35 0) 				(length 5.08)-				(name "33"+				(name "03" 					(effects 						(font (size 1.016 1.016)) 					)@@ -125,7 +125,7 @@ 			(pin passive line 				(at -13.97 3.81 0) 				(length 5.08)-				(name "34"+				(name "04" 					(effects 						(font (size 1.016 1.016)) 					)@@ -139,7 +139,7 @@ 			(pin passive line 				(at -13.97 1.27 0) 				(length 5.08)-				(name "35"+				(name "05" 					(effects 						(font (size 1.016 1.016)) 					)@@ -153,7 +153,7 @@ 			(pin passive line 				(at 12.7 11.43 180) 				(length 5.08)-				(name "36"+				(name "06" 					(effects 						(font (size 1.016 1.016)) 					)@@ -167,7 +167,7 @@ 			(pin passive line 				(at 12.7 8.89 180) 				(length 5.08)-				(name "37"+				(name "07" 					(effects 						(font (size 1.016 1.016)) 					)@@ -181,7 +181,7 @@ 			(pin passive line 				(at 12.7 6.35 180) 				(length 5.08)-				(name "38"+				(name "08" 					(effects 						(font (size 1.016 1.016)) 					)@@ -195,7 +195,7 @@ 			(pin passive line 				(at 12.7 3.81 180) 				(length 5.08)-				(name "39"+				(name "09" 					(effects 						(font (size 1.016 1.016)) 					)@@ -209,7 +209,7 @@ 			(pin passive line 				(at 12.7 1.27 180) 				(length 5.08)-				(name "40"+				(name "10" 					(effects 						(font (size 1.016 1.016)) 					)@@ -223,7 +223,7 @@ 			(pin passive line 				(at -13.97 -2.54 0) 				(length 5.08)-				(name "41"+				(name "11" 					(effects 						(font (size 1.016 1.016)) 					)@@ -237,7 +237,7 @@ 			(pin passive line 				(at -13.97 -5.08 0) 				(length 5.08)-				(name "42"+				(name "12" 					(effects 						(font (size 1.016 1.016)) 					)@@ -251,7 +251,7 @@ 			(pin passive line 				(at -13.97 -7.62 0) 				(length 5.08)-				(name "43"+				(name "13" 					(effects 						(font (size 1.016 1.016)) 					)@@ -265,7 +265,7 @@ 			(pin passive line 				(at -13.97 -10.16 0) 				(length 5.08)-				(name "44"+				(name "14" 					(effects 						(font (size 1.016 1.016)) 					)@@ -279,7 +279,7 @@ 			(pin passive line 				(at -13.97 -12.7 0) 				(length 5.08)-				(name "45"+				(name "15" 					(effects 						(font (size 1.016 1.016)) 					)@@ -293,7 +293,7 @@ 			(pin passive line 				(at 12.7 -2.54 180) 				(length 5.08)-				(name "46"+				(name "16" 					(effects 						(font (size 1.016 1.016)) 					)@@ -307,7 +307,7 @@ 			(pin passive line 				(at 12.7 -5.08 180) 				(length 5.08)-				(name "47"+				(name "17" 					(effects 						(font (size 1.016 1.016)) 					)@@ -321,7 +321,7 @@ 			(pin passive line 				(at 12.7 -7.62 180) 				(length 5.08)-				(name "48"+				(name "18" 					(effects 						(font (size 1.016 1.016)) 					)@@ -335,7 +335,7 @@ 			(pin passive line 				(at 12.7 -10.16 180) 				(length 5.08)-				(name "49"+				(name "19" 					(effects 						(font (size 1.016 1.016)) 					)@@ -349,7 +349,7 @@ 			(pin passive line 				(at 12.7 -12.7 180) 				(length 5.08)-				(name "50"+				(name "20" 					(effects 						(font (size 1.016 1.016)) 					)@@ -363,7 +363,7 @@ 			(pin passive line 				(at -13.97 -16.51 0) 				(length 5.08)-				(name "51"+				(name "21" 					(effects 						(font (size 1.016 1.016)) 					)@@ -377,7 +377,7 @@ 			(pin passive line 				(at -13.97 -19.05 0) 				(length 5.08)-				(name "52"+				(name "22" 					(effects 						(font (size 1.016 1.016)) 					)@@ -391,7 +391,7 @@ 			(pin passive line 				(at -13.97 -21.59 0) 				(length 5.08)-				(name "53"+				(name "23" 					(effects 						(font (size 1.016 1.016)) 					)@@ -405,7 +405,7 @@ 			(pin passive line 				(at -13.97 -24.13 0) 				(length 5.08)-				(name "54"+				(name "24" 					(effects 						(font (size 1.016 1.016)) 					)@@ -419,7 +419,7 @@ 			(pin passive line 				(at -13.97 -26.67 0) 				(length 5.08)-				(name "55"+				(name "25" 					(effects 						(font (size 1.016 1.016)) 					)@@ -430,10 +430,10 @@ 					) 				) 			)-			(pin power_in line+			(pin passive line 				(at 12.7 54.61 180) 				(length 5.08)-				(name "1"+				(name "P01L" 					(effects 						(font (size 1.016 1.016)) 					)@@ -444,10 +444,10 @@ 					) 				) 			)-			(pin power_in line+			(pin passive line 				(at 12.7 52.07 180) 				(length 5.08)-				(name "2"+				(name "P01L" 					(effects 						(font (size 1.016 1.016)) 					)@@ -458,10 +458,10 @@ 					) 				) 			)-			(pin power_in line+			(pin passive line 				(at 12.7 49.53 180) 				(length 5.08)-				(name "3"+				(name "P01L" 					(effects 						(font (size 1.016 1.016)) 					)@@ -472,10 +472,10 @@ 					) 				) 			)-			(pin power_in line+			(pin passive line 				(at 12.7 46.99 180) 				(length 5.08)-				(name "4"+				(name "P01L" 					(effects 						(font (size 1.016 1.016)) 					)@@ -486,10 +486,10 @@ 					) 				) 			)-			(pin power_in line+			(pin passive line 				(at 12.7 44.45 180) 				(length 5.08)-				(name "5"+				(name "P01L" 					(effects 						(font (size 1.016 1.016)) 					)@@ -500,10 +500,10 @@ 					) 				) 			)-			(pin power_in line+			(pin passive line 				(at -13.97 54.61 0) 				(length 5.08)-				(name "6"+				(name "P01R" 					(effects 						(font (size 1.016 1.016)) 					)@@ -514,10 +514,10 @@ 					) 				) 			)-			(pin power_in line+			(pin passive line 				(at -13.97 52.07 0) 				(length 5.08)-				(name "7"+				(name "P01R" 					(effects 						(font (size 1.016 1.016)) 					)@@ -528,10 +528,10 @@ 					) 				) 			)-			(pin power_in line+			(pin passive line 				(at -13.97 49.53 0) 				(length 5.08)-				(name "8"+				(name "P01R" 					(effects 						(font (size 1.016 1.016)) 					)@@ -542,10 +542,10 @@ 					) 				) 			)-			(pin power_in line+			(pin passive line 				(at -13.97 46.99 0) 				(length 5.08)-				(name "9"+				(name "P01R" 					(effects 						(font (size 1.016 1.016)) 					)@@ -556,10 +556,10 @@ 					) 				) 			)-			(pin power_in line+			(pin passive line 				(at -13.97 44.45 0) 				(length 5.08)-				(name "10"+				(name "P01R" 					(effects 						(font (size 1.016 1.016)) 					)@@ -570,10 +570,10 @@ 					) 				) 			)-			(pin power_in line+			(pin passive line 				(at 12.7 40.64 180) 				(length 5.08)-				(name "11"+				(name "P02L" 					(effects 						(font (size 1.016 1.016)) 					)@@ -584,10 +584,10 @@ 					) 				) 			)-			(pin power_in line+			(pin passive line 				(at 12.7 38.1 180) 				(length 5.08)-				(name "12"+				(name "P02L" 					(effects 						(font (size 1.016 1.016)) 					)@@ -598,10 +598,10 @@ 					) 				) 			)-			(pin power_in line+			(pin passive line 				(at 12.7 35.56 180) 				(length 5.08)-				(name "13"+				(name "P02L" 					(effects 						(font (size 1.016 1.016)) 					)@@ -612,10 +612,10 @@ 					) 				) 			)-			(pin power_in line+			(pin passive line 				(at 12.7 33.02 180) 				(length 5.08)-				(name "14"+				(name "P02L" 					(effects 						(font (size 1.016 1.016)) 					)@@ -626,10 +626,10 @@ 					) 				) 			)-			(pin power_in line+			(pin passive line 				(at 12.7 30.48 180) 				(length 5.08)-				(name "15"+				(name "P02L" 					(effects 						(font (size 1.016 1.016)) 					)@@ -640,10 +640,10 @@ 					) 				) 			)-			(pin power_in line+			(pin passive line 				(at -13.97 40.64 0) 				(length 5.08)-				(name "16"+				(name "P02R" 					(effects 						(font (size 1.016 1.016)) 					)@@ -654,10 +654,10 @@ 					) 				) 			)-			(pin power_in line+			(pin passive line 				(at -13.97 38.1 0) 				(length 5.08)-				(name "17"+				(name "P02R" 					(effects 						(font (size 1.016 1.016)) 					)@@ -668,10 +668,10 @@ 					) 				) 			)-			(pin power_in line+			(pin passive line 				(at -13.97 35.56 0) 				(length 5.08)-				(name "18"+				(name "P02R" 					(effects 						(font (size 1.016 1.016)) 					)@@ -682,10 +682,10 @@ 					) 				) 			)-			(pin power_in line+			(pin passive line 				(at -13.97 33.02 0) 				(length 5.08)-				(name "19"+				(name "P02R" 					(effects 						(font (size 1.016 1.016)) 					)@@ -696,10 +696,10 @@ 					) 				) 			)-			(pin power_in line+			(pin passive line 				(at -13.97 30.48 0) 				(length 5.08)-				(name "20"+				(name "P02R" 					(effects 						(font (size 1.016 1.016)) 					)@@ -710,10 +710,10 @@ 					) 				) 			)-			(pin power_in line+			(pin passive line 				(at 12.7 26.67 180) 				(length 5.08)-				(name "21"+				(name "P03L" 					(effects 						(font (size 1.016 1.016)) 					)@@ -724,10 +724,10 @@ 					) 				) 			)-			(pin power_in line+			(pin passive line 				(at 12.7 24.13 180) 				(length 5.08)-				(name "22"+				(name "P03L" 					(effects 						(font (size 1.016 1.016)) 					)@@ -738,10 +738,10 @@ 					) 				) 			)-			(pin power_in line+			(pin passive line 				(at 12.7 21.59 180) 				(length 5.08)-				(name "23"+				(name "P03L" 					(effects 						(font (size 1.016 1.016)) 					)@@ -752,10 +752,10 @@ 					) 				) 			)-			(pin power_in line+			(pin passive line 				(at 12.7 19.05 180) 				(length 5.08)-				(name "24"+				(name "P03L" 					(effects 						(font (size 1.016 1.016)) 					)@@ -766,10 +766,10 @@ 					) 				) 			)-			(pin power_in line+			(pin passive line 				(at 12.7 16.51 180) 				(length 5.08)-				(name "25"+				(name "P03L" 					(effects 						(font (size 1.016 1.016)) 					)@@ -780,10 +780,10 @@ 					) 				) 			)-			(pin power_in line+			(pin passive line 				(at -13.97 26.67 0) 				(length 5.08)-				(name "26"+				(name "P03R" 					(effects 						(font (size 1.016 1.016)) 					)@@ -794,10 +794,10 @@ 					) 				) 			)-			(pin power_in line+			(pin passive line 				(at -13.97 24.13 0) 				(length 5.08)-				(name "27"+				(name "P03R" 					(effects 						(font (size 1.016 1.016)) 					)@@ -808,10 +808,10 @@ 					) 				) 			)-			(pin power_in line+			(pin passive line 				(at -13.97 21.59 0) 				(length 5.08)-				(name "28"+				(name "P03R" 					(effects 						(font (size 1.016 1.016)) 					)@@ -822,10 +822,10 @@ 					) 				) 			)-			(pin power_in line+			(pin passive line 				(at -13.97 19.05 0) 				(length 5.08)-				(name "29"+				(name "P03R" 					(effects 						(font (size 1.016 1.016)) 					)@@ -836,10 +836,10 @@ 					) 				) 			)-			(pin power_in line+			(pin passive line 				(at -13.97 16.51 0) 				(length 5.08)-				(name "30"+				(name "P03R" 					(effects 						(font (size 1.016 1.016)) 					)
et60t-s03-5-05-000-s-r1-s.lbr+112−110
@@ -115,6 +115,8 @@   <wire x1="-15.5300" y1="8.0300" x2="-15.5300" y2="-5.0300" width="0.127" layer="21"/>   <text x="0" y="8.630" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>   <text x="0" y="-5.630" size="1.27" layer="27" align="top-center">&gt;VALUE</text>+  <hole x="-19.5000" y="1.5000" drill="3.2"/>+  <hole x="24.7100" y="1.5000" drill="3.2"/> </package> </packages> <symbols>@@ -127,61 +129,61 @@   <rectangle x1="-8.8900" y1="15.2400" x2="7.6200" y2="-29.2100" layer="94"/>   <text x="-1.2700" y="64.7700" size="1.27" layer="95" align="center">&gt;NAME</text>   <text x="0.0000" y="62.2300" size="1.27" layer="96" align="center">&gt;VALUE</text>-  <pin name="31" x="-13.97" y="11.43" length="middle" direction="pas"/>-  <pin name="32" x="-13.97" y="8.89" length="middle" direction="pas"/>-  <pin name="33" x="-13.97" y="6.35" length="middle" direction="pas"/>-  <pin name="34" x="-13.97" y="3.81" length="middle" direction="pas"/>-  <pin name="35" x="-13.97" y="1.27" length="middle" direction="pas"/>-  <pin name="36" x="12.7" y="11.43" length="middle" direction="pas" rot="R180"/>-  <pin name="37" x="12.7" y="8.89" length="middle" direction="pas" rot="R180"/>-  <pin name="38" x="12.7" y="6.35" length="middle" direction="pas" rot="R180"/>-  <pin name="39" x="12.7" y="3.81" length="middle" direction="pas" rot="R180"/>-  <pin name="40" x="12.7" y="1.27" length="middle" direction="pas" rot="R180"/>-  <pin name="41" x="-13.97" y="-2.54" length="middle" direction="pas"/>-  <pin name="42" x="-13.97" y="-5.08" length="middle" direction="pas"/>-  <pin name="43" x="-13.97" y="-7.62" length="middle" direction="pas"/>-  <pin name="44" x="-13.97" y="-10.16" length="middle" direction="pas"/>-  <pin name="45" x="-13.97" y="-12.7" length="middle" direction="pas"/>-  <pin name="46" x="12.7" y="-2.54" length="middle" direction="pas" rot="R180"/>-  <pin name="47" x="12.7" y="-5.08" length="middle" direction="pas" rot="R180"/>-  <pin name="48" x="12.7" y="-7.62" length="middle" direction="pas" rot="R180"/>-  <pin name="49" x="12.7" y="-10.16" length="middle" direction="pas" rot="R180"/>-  <pin name="50" x="12.7" y="-12.7" length="middle" direction="pas" rot="R180"/>-  <pin name="51" x="-13.97" y="-16.51" length="middle" direction="pas"/>-  <pin name="52" x="-13.97" y="-19.05" length="middle" direction="pas"/>-  <pin name="53" x="-13.97" y="-21.59" length="middle" direction="pas"/>-  <pin name="54" x="-13.97" y="-24.13" length="middle" direction="pas"/>-  <pin name="55" x="-13.97" y="-26.67" length="middle" direction="pas"/>-  <pin name="1" x="12.7" y="54.61" length="middle" direction="pwr" rot="R180"/>-  <pin name="2" x="12.7" y="52.07" length="middle" direction="pwr" rot="R180"/>-  <pin name="3" x="12.7" y="49.53" length="middle" direction="pwr" rot="R180"/>-  <pin name="4" x="12.7" y="46.99" length="middle" direction="pwr" rot="R180"/>-  <pin name="5" x="12.7" y="44.45" length="middle" direction="pwr" rot="R180"/>-  <pin name="6" x="-13.97" y="54.61" length="middle" direction="pwr"/>-  <pin name="7" x="-13.97" y="52.07" length="middle" direction="pwr"/>-  <pin name="8" x="-13.97" y="49.53" length="middle" direction="pwr"/>-  <pin name="9" x="-13.97" y="46.99" length="middle" direction="pwr"/>-  <pin name="10" x="-13.97" y="44.45" length="middle" direction="pwr"/>-  <pin name="11" x="12.7" y="40.64" length="middle" direction="pwr" rot="R180"/>-  <pin name="12" x="12.7" y="38.1" length="middle" direction="pwr" rot="R180"/>-  <pin name="13" x="12.7" y="35.56" length="middle" direction="pwr" rot="R180"/>-  <pin name="14" x="12.7" y="33.02" length="middle" direction="pwr" rot="R180"/>-  <pin name="15" x="12.7" y="30.48" length="middle" direction="pwr" rot="R180"/>-  <pin name="16" x="-13.97" y="40.64" length="middle" direction="pwr"/>-  <pin name="17" x="-13.97" y="38.1" length="middle" direction="pwr"/>-  <pin name="18" x="-13.97" y="35.56" length="middle" direction="pwr"/>-  <pin name="19" x="-13.97" y="33.02" length="middle" direction="pwr"/>-  <pin name="20" x="-13.97" y="30.48" length="middle" direction="pwr"/>-  <pin name="21" x="12.7" y="26.67" length="middle" direction="pwr" rot="R180"/>-  <pin name="22" x="12.7" y="24.13" length="middle" direction="pwr" rot="R180"/>-  <pin name="23" x="12.7" y="21.59" length="middle" direction="pwr" rot="R180"/>-  <pin name="24" x="12.7" y="19.05" length="middle" direction="pwr" rot="R180"/>-  <pin name="25" x="12.7" y="16.51" length="middle" direction="pwr" rot="R180"/>-  <pin name="26" x="-13.97" y="26.67" length="middle" direction="pwr"/>-  <pin name="27" x="-13.97" y="24.13" length="middle" direction="pwr"/>-  <pin name="28" x="-13.97" y="21.59" length="middle" direction="pwr"/>-  <pin name="29" x="-13.97" y="19.05" length="middle" direction="pwr"/>-  <pin name="30" x="-13.97" y="16.51" length="middle" direction="pwr"/>+  <pin name="01" x="-13.97" y="11.43" length="middle" direction="pas"/>+  <pin name="02" x="-13.97" y="8.89" length="middle" direction="pas"/>+  <pin name="03" x="-13.97" y="6.35" length="middle" direction="pas"/>+  <pin name="04" x="-13.97" y="3.81" length="middle" direction="pas"/>+  <pin name="05" x="-13.97" y="1.27" length="middle" direction="pas"/>+  <pin name="06" x="12.7" y="11.43" length="middle" direction="pas" rot="R180"/>+  <pin name="07" x="12.7" y="8.89" length="middle" direction="pas" rot="R180"/>+  <pin name="08" x="12.7" y="6.35" length="middle" direction="pas" rot="R180"/>+  <pin name="09" x="12.7" y="3.81" length="middle" direction="pas" rot="R180"/>+  <pin name="10" x="12.7" y="1.27" length="middle" direction="pas" rot="R180"/>+  <pin name="11" x="-13.97" y="-2.54" length="middle" direction="pas"/>+  <pin name="12" x="-13.97" y="-5.08" length="middle" direction="pas"/>+  <pin name="13" x="-13.97" y="-7.62" length="middle" direction="pas"/>+  <pin name="14" x="-13.97" y="-10.16" length="middle" direction="pas"/>+  <pin name="15" x="-13.97" y="-12.7" length="middle" direction="pas"/>+  <pin name="16" x="12.7" y="-2.54" length="middle" direction="pas" rot="R180"/>+  <pin name="17" x="12.7" y="-5.08" length="middle" direction="pas" rot="R180"/>+  <pin name="18" x="12.7" y="-7.62" length="middle" direction="pas" rot="R180"/>+  <pin name="19" x="12.7" y="-10.16" length="middle" direction="pas" rot="R180"/>+  <pin name="20" x="12.7" y="-12.7" length="middle" direction="pas" rot="R180"/>+  <pin name="21" x="-13.97" y="-16.51" length="middle" direction="pas"/>+  <pin name="22" x="-13.97" y="-19.05" length="middle" direction="pas"/>+  <pin name="23" x="-13.97" y="-21.59" length="middle" direction="pas"/>+  <pin name="24" x="-13.97" y="-24.13" length="middle" direction="pas"/>+  <pin name="25" x="-13.97" y="-26.67" length="middle" direction="pas"/>+  <pin name="P01L" x="12.7" y="54.61" length="middle" direction="pas" rot="R180"/>+  <pin name="P01L@2" x="12.7" y="52.07" length="middle" direction="pas" rot="R180"/>+  <pin name="P01L@3" x="12.7" y="49.53" length="middle" direction="pas" rot="R180"/>+  <pin name="P01L@4" x="12.7" y="46.99" length="middle" direction="pas" rot="R180"/>+  <pin name="P01L@5" x="12.7" y="44.45" length="middle" direction="pas" rot="R180"/>+  <pin name="P01R" x="-13.97" y="54.61" length="middle" direction="pas"/>+  <pin name="P01R@2" x="-13.97" y="52.07" length="middle" direction="pas"/>+  <pin name="P01R@3" x="-13.97" y="49.53" length="middle" direction="pas"/>+  <pin name="P01R@4" x="-13.97" y="46.99" length="middle" direction="pas"/>+  <pin name="P01R@5" x="-13.97" y="44.45" length="middle" direction="pas"/>+  <pin name="P02L" x="12.7" y="40.64" length="middle" direction="pas" rot="R180"/>+  <pin name="P02L@2" x="12.7" y="38.1" length="middle" direction="pas" rot="R180"/>+  <pin name="P02L@3" x="12.7" y="35.56" length="middle" direction="pas" rot="R180"/>+  <pin name="P02L@4" x="12.7" y="33.02" length="middle" direction="pas" rot="R180"/>+  <pin name="P02L@5" x="12.7" y="30.48" length="middle" direction="pas" rot="R180"/>+  <pin name="P02R" x="-13.97" y="40.64" length="middle" direction="pas"/>+  <pin name="P02R@2" x="-13.97" y="38.1" length="middle" direction="pas"/>+  <pin name="P02R@3" x="-13.97" y="35.56" length="middle" direction="pas"/>+  <pin name="P02R@4" x="-13.97" y="33.02" length="middle" direction="pas"/>+  <pin name="P02R@5" x="-13.97" y="30.48" length="middle" direction="pas"/>+  <pin name="P03L" x="12.7" y="26.67" length="middle" direction="pas" rot="R180"/>+  <pin name="P03L@2" x="12.7" y="24.13" length="middle" direction="pas" rot="R180"/>+  <pin name="P03L@3" x="12.7" y="21.59" length="middle" direction="pas" rot="R180"/>+  <pin name="P03L@4" x="12.7" y="19.05" length="middle" direction="pas" rot="R180"/>+  <pin name="P03L@5" x="12.7" y="16.51" length="middle" direction="pas" rot="R180"/>+  <pin name="P03R" x="-13.97" y="26.67" length="middle" direction="pas"/>+  <pin name="P03R@2" x="-13.97" y="24.13" length="middle" direction="pas"/>+  <pin name="P03R@3" x="-13.97" y="21.59" length="middle" direction="pas"/>+  <pin name="P03R@4" x="-13.97" y="19.05" length="middle" direction="pas"/>+  <pin name="P03R@5" x="-13.97" y="16.51" length="middle" direction="pas"/> </symbol> </symbols> <devicesets>@@ -193,61 +195,61 @@   <devices>     <device name="" package="Samtec_ET60T-S03-5-05-000-S-R1-S">       <connects>-        <connect gate="G$1" pin="31" pad="1"/>-        <connect gate="G$1" pin="32" pad="2"/>-        <connect gate="G$1" pin="33" pad="3"/>-        <connect gate="G$1" pin="34" pad="4"/>-        <connect gate="G$1" pin="35" pad="5"/>-        <connect gate="G$1" pin="36" pad="6"/>-        <connect gate="G$1" pin="37" pad="7"/>-        <connect gate="G$1" pin="38" pad="8"/>-        <connect gate="G$1" pin="39" pad="9"/>-        <connect gate="G$1" pin="40" pad="10"/>-        <connect gate="G$1" pin="41" pad="11"/>-        <connect gate="G$1" pin="42" pad="12"/>-        <connect gate="G$1" pin="43" pad="13"/>-        <connect gate="G$1" pin="44" pad="14"/>-        <connect gate="G$1" pin="45" pad="15"/>-        <connect gate="G$1" pin="46" pad="16"/>-        <connect gate="G$1" pin="47" pad="17"/>-        <connect gate="G$1" pin="48" pad="18"/>-        <connect gate="G$1" pin="49" pad="19"/>-        <connect gate="G$1" pin="50" pad="20"/>-        <connect gate="G$1" pin="51" pad="21"/>-        <connect gate="G$1" pin="52" pad="22"/>-        <connect gate="G$1" pin="53" pad="23"/>-        <connect gate="G$1" pin="54" pad="24"/>-        <connect gate="G$1" pin="55" pad="25"/>-        <connect gate="G$1" pin="1" pad="P1_1"/>-        <connect gate="G$1" pin="2" pad="P1_2"/>-        <connect gate="G$1" pin="3" pad="P1_3"/>-        <connect gate="G$1" pin="4" pad="P1_4"/>-        <connect gate="G$1" pin="5" pad="P1_5"/>-        <connect gate="G$1" pin="6" pad="P1_6"/>-        <connect gate="G$1" pin="7" pad="P1_7"/>-        <connect gate="G$1" pin="8" pad="P1_8"/>-        <connect gate="G$1" pin="9" pad="P1_9"/>-        <connect gate="G$1" pin="10" pad="P1_10"/>-        <connect gate="G$1" pin="11" pad="P2_1"/>-        <connect gate="G$1" pin="12" pad="P2_2"/>-        <connect gate="G$1" pin="13" pad="P2_3"/>-        <connect gate="G$1" pin="14" pad="P2_4"/>-        <connect gate="G$1" pin="15" pad="P2_5"/>-        <connect gate="G$1" pin="16" pad="P2_6"/>-        <connect gate="G$1" pin="17" pad="P2_7"/>-        <connect gate="G$1" pin="18" pad="P2_8"/>-        <connect gate="G$1" pin="19" pad="P2_9"/>-        <connect gate="G$1" pin="20" pad="P2_10"/>-        <connect gate="G$1" pin="21" pad="P3_1"/>-        <connect gate="G$1" pin="22" pad="P3_2"/>-        <connect gate="G$1" pin="23" pad="P3_3"/>-        <connect gate="G$1" pin="24" pad="P3_4"/>-        <connect gate="G$1" pin="25" pad="P3_5"/>-        <connect gate="G$1" pin="26" pad="P3_6"/>-        <connect gate="G$1" pin="27" pad="P3_7"/>-        <connect gate="G$1" pin="28" pad="P3_8"/>-        <connect gate="G$1" pin="29" pad="P3_9"/>-        <connect gate="G$1" pin="30" pad="P3_10"/>+        <connect gate="G$1" pin="01" pad="1"/>+        <connect gate="G$1" pin="02" pad="2"/>+        <connect gate="G$1" pin="03" pad="3"/>+        <connect gate="G$1" pin="04" pad="4"/>+        <connect gate="G$1" pin="05" pad="5"/>+        <connect gate="G$1" pin="06" pad="6"/>+        <connect gate="G$1" pin="07" pad="7"/>+        <connect gate="G$1" pin="08" pad="8"/>+        <connect gate="G$1" pin="09" pad="9"/>+        <connect gate="G$1" pin="10" pad="10"/>+        <connect gate="G$1" pin="11" pad="11"/>+        <connect gate="G$1" pin="12" pad="12"/>+        <connect gate="G$1" pin="13" pad="13"/>+        <connect gate="G$1" pin="14" pad="14"/>+        <connect gate="G$1" pin="15" pad="15"/>+        <connect gate="G$1" pin="16" pad="16"/>+        <connect gate="G$1" pin="17" pad="17"/>+        <connect gate="G$1" pin="18" pad="18"/>+        <connect gate="G$1" pin="19" pad="19"/>+        <connect gate="G$1" pin="20" pad="20"/>+        <connect gate="G$1" pin="21" pad="21"/>+        <connect gate="G$1" pin="22" pad="22"/>+        <connect gate="G$1" pin="23" pad="23"/>+        <connect gate="G$1" pin="24" pad="24"/>+        <connect gate="G$1" pin="25" pad="25"/>+        <connect gate="G$1" pin="P01L" pad="P1_1"/>+        <connect gate="G$1" pin="P01L@2" pad="P1_2"/>+        <connect gate="G$1" pin="P01L@3" pad="P1_3"/>+        <connect gate="G$1" pin="P01L@4" pad="P1_4"/>+        <connect gate="G$1" pin="P01L@5" pad="P1_5"/>+        <connect gate="G$1" pin="P01R" pad="P1_6"/>+        <connect gate="G$1" pin="P01R@2" pad="P1_7"/>+        <connect gate="G$1" pin="P01R@3" pad="P1_8"/>+        <connect gate="G$1" pin="P01R@4" pad="P1_9"/>+        <connect gate="G$1" pin="P01R@5" pad="P1_10"/>+        <connect gate="G$1" pin="P02L" pad="P2_1"/>+        <connect gate="G$1" pin="P02L@2" pad="P2_2"/>+        <connect gate="G$1" pin="P02L@3" pad="P2_3"/>+        <connect gate="G$1" pin="P02L@4" pad="P2_4"/>+        <connect gate="G$1" pin="P02L@5" pad="P2_5"/>+        <connect gate="G$1" pin="P02R" pad="P2_6"/>+        <connect gate="G$1" pin="P02R@2" pad="P2_7"/>+        <connect gate="G$1" pin="P02R@3" pad="P2_8"/>+        <connect gate="G$1" pin="P02R@4" pad="P2_9"/>+        <connect gate="G$1" pin="P02R@5" pad="P2_10"/>+        <connect gate="G$1" pin="P03L" pad="P3_1"/>+        <connect gate="G$1" pin="P03L@2" pad="P3_2"/>+        <connect gate="G$1" pin="P03L@3" pad="P3_3"/>+        <connect gate="G$1" pin="P03L@4" pad="P3_4"/>+        <connect gate="G$1" pin="P03L@5" pad="P3_5"/>+        <connect gate="G$1" pin="P03R" pad="P3_6"/>+        <connect gate="G$1" pin="P03R@2" pad="P3_7"/>+        <connect gate="G$1" pin="P03R@3" pad="P3_8"/>+        <connect gate="G$1" pin="P03R@4" pad="P3_9"/>+        <connect gate="G$1" pin="P03R@5" pad="P3_10"/>       </connects>       <technologies>         <technology name="">
package.json+151−154
@@ -1,13 +1,12 @@ {   "slug": "et60t-s03-5-05-000-s-r1-s",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "tags": [     "component",     "connectors",     "et60t-s03-5-05-000-s-r1-s",-    "board-derived",-    "staged-for-validation"+    "board-derived"   ],   "dependencies": {},   "hero": {@@ -25,8 +24,8 @@     "et60t-s03-5-05-000-s-r1-s.lbr",     "docs/hero.png",     "docs/et60t-s03-5-05-000-s-r1-s-datasheet.pdf",-    "viewers/symbol.html",-    "viewers/footprint.html"+    "et60t-s03-5-05-000-s-r1-s-hero.glb",+    "et60t-s03-5-05-000-s-r1-s-hero.overlay.json"   ],   "component": {     "mpn": "ET60T-S03-5-05-000-S-R1-S",@@ -39,7 +38,7 @@     "parts": {       "symbol": "et60t-s03-5-05-000-s-r1-s.kicad_sym",       "footprint": "et60t-s03-5-05-000-s-r1-s.kicad_mod",-      "model_3d": "et60t-s03-5-05-000-s-r1-s.glb",+      "model_3d": "et60t-s03-5-05-000-s-r1-s-hero.glb",       "model_3d_plain": "et60t-s03-5-05-000-s-r1-s.glb",       "model_3d_step": "et60t-s03-5-05-000-s-r1-s.step",       "model_3d_step_plain": "et60t-s03-5-05-000-s-r1-s.step",@@ -47,342 +46,342 @@     },     "distributor_links": {       "digikey": false,-      "digikey_note": "2026-10-09: no exact-MPN listing for ET60T-S03-5-05-000-S-R1-S found via the digikey API.",+      "digikey_note": "Not carried: searched ET60T-S03-5-05-000-S-R1-S (2026-10-09) and ET60T-S03 on 2026-10-27.",       "mouser": false,-      "mouser_note": "2026-10-09: no exact-MPN listing for ET60T-S03-5-05-000-S-R1-S found via the mouser API.",+      "mouser_note": "Not carried: searched ET60T-S03-5-05-000-S-R1-S (2026-10-09) and ET60T-S03 on 2026-10-27 (other ET60T configurations listed, not this one).",       "lcsc": false,       "lcsc_note": "2026-10-09: no LCSC number on the source BOM and none found in the JLCPCB/LCSC catalogue for ET60T-S03-5-05-000-S-R1-S."     },     "pins": [       {         "number": "1",-        "name": "31",+        "name": "01",         "type": "passive",-        "description": "Signal contact 01 in the 5-row x 5-position signal field (2.54 mm pitch, 0.64 mm sq through-hole tail). Function user-defined by the mating backplane; datasheet gives no electrical assignment. [datasheet p.1]"+        "description": "Signal contact 01; numbering per the manufacturer drawing: 5 rows x 5 positions at 2.00 mm pitch, 01 at the left end of the row nearest the board front edge, counting left to right along each row and then row by row away from the edge (Fig 4). [datasheet p.3]"       },       {         "number": "2",-        "name": "32",+        "name": "02",         "type": "passive",-        "description": "Signal contact 02 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 02; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "3",-        "name": "33",+        "name": "03",         "type": "passive",-        "description": "Signal contact 03 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 03; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "4",-        "name": "34",+        "name": "04",         "type": "passive",-        "description": "Signal contact 04 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 04; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "5",-        "name": "35",+        "name": "05",         "type": "passive",-        "description": "Signal contact 05 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 05; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "6",-        "name": "36",+        "name": "06",         "type": "passive",-        "description": "Signal contact 06 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 06; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "7",-        "name": "37",+        "name": "07",         "type": "passive",-        "description": "Signal contact 07 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 07; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "8",-        "name": "38",+        "name": "08",         "type": "passive",-        "description": "Signal contact 08 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 08; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "9",-        "name": "39",+        "name": "09",         "type": "passive",-        "description": "Signal contact 09 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 09; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "10",-        "name": "40",+        "name": "10",         "type": "passive",-        "description": "Signal contact 10 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 10; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "11",-        "name": "41",+        "name": "11",         "type": "passive",-        "description": "Signal contact 11 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 11; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "12",-        "name": "42",+        "name": "12",         "type": "passive",-        "description": "Signal contact 12 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 12; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "13",-        "name": "43",+        "name": "13",         "type": "passive",-        "description": "Signal contact 13 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 13; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "14",-        "name": "44",+        "name": "14",         "type": "passive",-        "description": "Signal contact 14 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 14; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "15",-        "name": "45",+        "name": "15",         "type": "passive",-        "description": "Signal contact 15 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 15; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "16",-        "name": "46",+        "name": "16",         "type": "passive",-        "description": "Signal contact 16 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 16; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "17",-        "name": "47",+        "name": "17",         "type": "passive",-        "description": "Signal contact 17 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 17; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "18",-        "name": "48",+        "name": "18",         "type": "passive",-        "description": "Signal contact 18 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 18; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "19",-        "name": "49",+        "name": "19",         "type": "passive",-        "description": "Signal contact 19 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 19; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "20",-        "name": "50",+        "name": "20",         "type": "passive",-        "description": "Signal contact 20 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 20; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "21",-        "name": "51",+        "name": "21",         "type": "passive",-        "description": "Signal contact 21 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 21; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "22",-        "name": "52",+        "name": "22",         "type": "passive",-        "description": "Signal contact 22 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 22; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "23",-        "name": "53",+        "name": "23",         "type": "passive",-        "description": "Signal contact 23 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 23; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "24",-        "name": "54",+        "name": "24",         "type": "passive",-        "description": "Signal contact 24 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 24; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "25",-        "name": "55",+        "name": "25",         "type": "passive",-        "description": "Signal contact 25 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 25; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "P1_1",-        "name": "1",-        "type": "power_in",-        "description": "Contact 1; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P01L",+        "type": "passive",+        "description": "Split power contact P01L (position P01, left half), tail 1 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P1_2",-        "name": "2",-        "type": "power_in",-        "description": "Contact 2; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P01L",+        "type": "passive",+        "description": "Split power contact P01L (position P01, left half), tail 2 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P1_3",-        "name": "3",-        "type": "power_in",-        "description": "Contact 3; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P01L",+        "type": "passive",+        "description": "Split power contact P01L (position P01, left half), tail 3 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P1_4",-        "name": "4",-        "type": "power_in",-        "description": "Contact 4; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P01L",+        "type": "passive",+        "description": "Split power contact P01L (position P01, left half), tail 4 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P1_5",-        "name": "5",-        "type": "power_in",-        "description": "Contact 5; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P01L",+        "type": "passive",+        "description": "Split power contact P01L (position P01, left half), tail 5 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P1_6",-        "name": "6",-        "type": "power_in",-        "description": "Contact 6; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P01R",+        "type": "passive",+        "description": "Split power contact P01R (position P01, right half), tail 1 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P1_7",-        "name": "7",-        "type": "power_in",-        "description": "Contact 7; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P01R",+        "type": "passive",+        "description": "Split power contact P01R (position P01, right half), tail 2 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P1_8",-        "name": "8",-        "type": "power_in",-        "description": "Contact 8; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P01R",+        "type": "passive",+        "description": "Split power contact P01R (position P01, right half), tail 3 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P1_9",-        "name": "9",-        "type": "power_in",-        "description": "Contact 9; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P01R",+        "type": "passive",+        "description": "Split power contact P01R (position P01, right half), tail 4 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P1_10",-        "name": "10",-        "type": "power_in",-        "description": "Contact 10; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P01R",+        "type": "passive",+        "description": "Split power contact P01R (position P01, right half), tail 5 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P2_1",-        "name": "11",-        "type": "power_in",-        "description": "Contact 11; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P02L",+        "type": "passive",+        "description": "Split power contact P02L (position P02, left half), tail 1 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P2_2",-        "name": "12",-        "type": "power_in",-        "description": "Contact 12; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P02L",+        "type": "passive",+        "description": "Split power contact P02L (position P02, left half), tail 2 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P2_3",-        "name": "13",-        "type": "power_in",-        "description": "Contact 13; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P02L",+        "type": "passive",+        "description": "Split power contact P02L (position P02, left half), tail 3 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P2_4",-        "name": "14",-        "type": "power_in",-        "description": "Contact 14; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P02L",+        "type": "passive",+        "description": "Split power contact P02L (position P02, left half), tail 4 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P2_5",-        "name": "15",-        "type": "power_in",-        "description": "Contact 15; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P02L",+        "type": "passive",+        "description": "Split power contact P02L (position P02, left half), tail 5 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P2_6",-        "name": "16",-        "type": "power_in",-        "description": "Contact 16; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P02R",+        "type": "passive",+        "description": "Split power contact P02R (position P02, right half), tail 1 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P2_7",-        "name": "17",-        "type": "power_in",-        "description": "Contact 17; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P02R",+        "type": "passive",+        "description": "Split power contact P02R (position P02, right half), tail 2 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P2_8",-        "name": "18",-        "type": "power_in",-        "description": "Contact 18; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P02R",+        "type": "passive",+        "description": "Split power contact P02R (position P02, right half), tail 3 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P2_9",-        "name": "19",-        "type": "power_in",-        "description": "Contact 19; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P02R",+        "type": "passive",+        "description": "Split power contact P02R (position P02, right half), tail 4 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P2_10",-        "name": "20",-        "type": "power_in",-        "description": "Contact 20; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P02R",+        "type": "passive",+        "description": "Split power contact P02R (position P02, right half), tail 5 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P3_1",-        "name": "21",-        "type": "power_in",-        "description": "Contact 21; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P03L",+        "type": "passive",+        "description": "Split power contact P03L (position P03, left half), tail 1 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P3_2",-        "name": "22",-        "type": "power_in",-        "description": "Contact 22; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P03L",+        "type": "passive",+        "description": "Split power contact P03L (position P03, left half), tail 2 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P3_3",-        "name": "23",-        "type": "power_in",-        "description": "Contact 23; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P03L",+        "type": "passive",+        "description": "Split power contact P03L (position P03, left half), tail 3 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P3_4",-        "name": "24",-        "type": "power_in",-        "description": "Contact 24; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P03L",+        "type": "passive",+        "description": "Split power contact P03L (position P03, left half), tail 4 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P3_5",-        "name": "25",-        "type": "power_in",-        "description": "Contact 25; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P03L",+        "type": "passive",+        "description": "Split power contact P03L (position P03, left half), tail 5 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P3_6",-        "name": "26",-        "type": "power_in",-        "description": "Contact 26; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P03R",+        "type": "passive",+        "description": "Split power contact P03R (position P03, right half), tail 1 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P3_7",-        "name": "27",-        "type": "power_in",-        "description": "Contact 27; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P03R",+        "type": "passive",+        "description": "Split power contact P03R (position P03, right half), tail 2 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P3_8",-        "name": "28",-        "type": "power_in",-        "description": "Contact 28; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P03R",+        "type": "passive",+        "description": "Split power contact P03R (position P03, right half), tail 3 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P3_9",-        "name": "29",-        "type": "power_in",-        "description": "Contact 29; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P03R",+        "type": "passive",+        "description": "Split power contact P03R (position P03, right half), tail 4 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P3_10",-        "name": "30",-        "type": "power_in",-        "description": "Contact 30; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P03R",+        "type": "passive",+        "description": "Split power contact P03R (position P03, right half), tail 5 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       }     ],     "provenance": {@@ -395,7 +394,9 @@         "url": "https://suddendocs.samtec.com/prints/et60t-xxx-x-xx-xxx-x-rx-x-x-mkt.pdf",         "pages": 11,         "sha256": "bdd47d4c66c7174d86d682f6971f939500cdb8edca1a3602bee87309cd340209",-        "source_tier": "mfr"+        "source_tier": "mfr",+        "retrieved": "2026-10-27",+        "edition": "ET60T-XXX-X-XX-XXX-X-RX-X-X print, Revision Y (sheet date 8/30/2023)"       },       "cad": "Footprint and symbol as used on Adom board designs; 3D model: Adom-generated 3D model built from the datasheet dimensions (simplified; CC-BY-SA 4.0); no vendor CAD is redistributed",       "pins": {@@ -405,10 +406,6 @@         "refuses_to_fabricate": true       }     },-    "viewers": {-      "symbol": "viewers/symbol.html",-      "footprint": "viewers/footprint.html"-    },     "models_3d": [       {         "file": "et60t-s03-5-05-000-s-r1-s.step",@@ -431,4 +428,4 @@     ]   },   "description": "Samtec Samtec ET60T series board connector (R1 right-angle), Samtec_ET60T-S03-5-05-000-S-R1-S. KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet."-}\ No newline at end of file+}
page.json+154−151
@@ -4,14 +4,13 @@   "slug": "et60t-s03-5-05-000-s-r1-s",   "title": "ET60T-S03-5-05-000-S-R1-S",   "brief": "Samtec Samtec ET60T series board connector (R1 right-angle), Samtec_ET60T-S03-5-05-000-S-R1-S. KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",     "connectors",     "et60t-s03-5-05-000-s-r1-s",-    "board-derived",-    "staged-for-validation"+    "board-derived"   ],   "component": {     "mpn": "ET60T-S03-5-05-000-S-R1-S",@@ -24,7 +23,7 @@     "parts": {       "symbol": "et60t-s03-5-05-000-s-r1-s.kicad_sym",       "footprint": "et60t-s03-5-05-000-s-r1-s.kicad_mod",-      "model_3d": "et60t-s03-5-05-000-s-r1-s.glb",+      "model_3d": "et60t-s03-5-05-000-s-r1-s-hero.glb",       "model_3d_plain": "et60t-s03-5-05-000-s-r1-s.glb",       "model_3d_step": "et60t-s03-5-05-000-s-r1-s.step",       "model_3d_step_plain": "et60t-s03-5-05-000-s-r1-s.step",@@ -32,342 +31,342 @@     },     "distributor_links": {       "digikey": false,-      "digikey_note": "2026-10-09: no exact-MPN listing for ET60T-S03-5-05-000-S-R1-S found via the digikey API.",+      "digikey_note": "Not carried: searched ET60T-S03-5-05-000-S-R1-S (2026-10-09) and ET60T-S03 on 2026-10-27.",       "mouser": false,-      "mouser_note": "2026-10-09: no exact-MPN listing for ET60T-S03-5-05-000-S-R1-S found via the mouser API.",+      "mouser_note": "Not carried: searched ET60T-S03-5-05-000-S-R1-S (2026-10-09) and ET60T-S03 on 2026-10-27 (other ET60T configurations listed, not this one).",       "lcsc": false,       "lcsc_note": "2026-10-09: no LCSC number on the source BOM and none found in the JLCPCB/LCSC catalogue for ET60T-S03-5-05-000-S-R1-S."     },     "pins": [       {         "number": "1",-        "name": "31",+        "name": "01",         "type": "passive",-        "description": "Signal contact 01 in the 5-row x 5-position signal field (2.54 mm pitch, 0.64 mm sq through-hole tail). Function user-defined by the mating backplane; datasheet gives no electrical assignment. [datasheet p.1]"+        "description": "Signal contact 01; numbering per the manufacturer drawing: 5 rows x 5 positions at 2.00 mm pitch, 01 at the left end of the row nearest the board front edge, counting left to right along each row and then row by row away from the edge (Fig 4). [datasheet p.3]"       },       {         "number": "2",-        "name": "32",+        "name": "02",         "type": "passive",-        "description": "Signal contact 02 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 02; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "3",-        "name": "33",+        "name": "03",         "type": "passive",-        "description": "Signal contact 03 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 03; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "4",-        "name": "34",+        "name": "04",         "type": "passive",-        "description": "Signal contact 04 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 04; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "5",-        "name": "35",+        "name": "05",         "type": "passive",-        "description": "Signal contact 05 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 05; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "6",-        "name": "36",+        "name": "06",         "type": "passive",-        "description": "Signal contact 06 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 06; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "7",-        "name": "37",+        "name": "07",         "type": "passive",-        "description": "Signal contact 07 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 07; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "8",-        "name": "38",+        "name": "08",         "type": "passive",-        "description": "Signal contact 08 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 08; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "9",-        "name": "39",+        "name": "09",         "type": "passive",-        "description": "Signal contact 09 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 09; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "10",-        "name": "40",+        "name": "10",         "type": "passive",-        "description": "Signal contact 10 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 10; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "11",-        "name": "41",+        "name": "11",         "type": "passive",-        "description": "Signal contact 11 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 11; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "12",-        "name": "42",+        "name": "12",         "type": "passive",-        "description": "Signal contact 12 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 12; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "13",-        "name": "43",+        "name": "13",         "type": "passive",-        "description": "Signal contact 13 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 13; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "14",-        "name": "44",+        "name": "14",         "type": "passive",-        "description": "Signal contact 14 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 14; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "15",-        "name": "45",+        "name": "15",         "type": "passive",-        "description": "Signal contact 15 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 15; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "16",-        "name": "46",+        "name": "16",         "type": "passive",-        "description": "Signal contact 16 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 16; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "17",-        "name": "47",+        "name": "17",         "type": "passive",-        "description": "Signal contact 17 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 17; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "18",-        "name": "48",+        "name": "18",         "type": "passive",-        "description": "Signal contact 18 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 18; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "19",-        "name": "49",+        "name": "19",         "type": "passive",-        "description": "Signal contact 19 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 19; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "20",-        "name": "50",+        "name": "20",         "type": "passive",-        "description": "Signal contact 20 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 20; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "21",-        "name": "51",+        "name": "21",         "type": "passive",-        "description": "Signal contact 21 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 21; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "22",-        "name": "52",+        "name": "22",         "type": "passive",-        "description": "Signal contact 22 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 22; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "23",-        "name": "53",+        "name": "23",         "type": "passive",-        "description": "Signal contact 23 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 23; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "24",-        "name": "54",+        "name": "24",         "type": "passive",-        "description": "Signal contact 24 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 24; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "25",-        "name": "55",+        "name": "25",         "type": "passive",-        "description": "Signal contact 25 in the 5x5 signal field. Function user-defined. [datasheet p.1]"+        "description": "Signal contact 25; numbering per the manufacturer drawing. [datasheet p.3]"       },       {         "number": "P1_1",-        "name": "1",-        "type": "power_in",-        "description": "Contact 1; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P01L",+        "type": "passive",+        "description": "Split power contact P01L (position P01, left half), tail 1 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P1_2",-        "name": "2",-        "type": "power_in",-        "description": "Contact 2; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P01L",+        "type": "passive",+        "description": "Split power contact P01L (position P01, left half), tail 2 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P1_3",-        "name": "3",-        "type": "power_in",-        "description": "Contact 3; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P01L",+        "type": "passive",+        "description": "Split power contact P01L (position P01, left half), tail 3 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P1_4",-        "name": "4",-        "type": "power_in",-        "description": "Contact 4; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P01L",+        "type": "passive",+        "description": "Split power contact P01L (position P01, left half), tail 4 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P1_5",-        "name": "5",-        "type": "power_in",-        "description": "Contact 5; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P01L",+        "type": "passive",+        "description": "Split power contact P01L (position P01, left half), tail 5 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P1_6",-        "name": "6",-        "type": "power_in",-        "description": "Contact 6; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P01R",+        "type": "passive",+        "description": "Split power contact P01R (position P01, right half), tail 1 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P1_7",-        "name": "7",-        "type": "power_in",-        "description": "Contact 7; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P01R",+        "type": "passive",+        "description": "Split power contact P01R (position P01, right half), tail 2 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P1_8",-        "name": "8",-        "type": "power_in",-        "description": "Contact 8; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P01R",+        "type": "passive",+        "description": "Split power contact P01R (position P01, right half), tail 3 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P1_9",-        "name": "9",-        "type": "power_in",-        "description": "Contact 9; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P01R",+        "type": "passive",+        "description": "Split power contact P01R (position P01, right half), tail 4 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P1_10",-        "name": "10",-        "type": "power_in",-        "description": "Contact 10; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P01R",+        "type": "passive",+        "description": "Split power contact P01R (position P01, right half), tail 5 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P2_1",-        "name": "11",-        "type": "power_in",-        "description": "Contact 11; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P02L",+        "type": "passive",+        "description": "Split power contact P02L (position P02, left half), tail 1 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P2_2",-        "name": "12",-        "type": "power_in",-        "description": "Contact 12; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P02L",+        "type": "passive",+        "description": "Split power contact P02L (position P02, left half), tail 2 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P2_3",-        "name": "13",-        "type": "power_in",-        "description": "Contact 13; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P02L",+        "type": "passive",+        "description": "Split power contact P02L (position P02, left half), tail 3 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P2_4",-        "name": "14",-        "type": "power_in",-        "description": "Contact 14; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P02L",+        "type": "passive",+        "description": "Split power contact P02L (position P02, left half), tail 4 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P2_5",-        "name": "15",-        "type": "power_in",-        "description": "Contact 15; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P02L",+        "type": "passive",+        "description": "Split power contact P02L (position P02, left half), tail 5 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P2_6",-        "name": "16",-        "type": "power_in",-        "description": "Contact 16; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P02R",+        "type": "passive",+        "description": "Split power contact P02R (position P02, right half), tail 1 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P2_7",-        "name": "17",-        "type": "power_in",-        "description": "Contact 17; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P02R",+        "type": "passive",+        "description": "Split power contact P02R (position P02, right half), tail 2 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P2_8",-        "name": "18",-        "type": "power_in",-        "description": "Contact 18; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P02R",+        "type": "passive",+        "description": "Split power contact P02R (position P02, right half), tail 3 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P2_9",-        "name": "19",-        "type": "power_in",-        "description": "Contact 19; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P02R",+        "type": "passive",+        "description": "Split power contact P02R (position P02, right half), tail 4 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P2_10",-        "name": "20",-        "type": "power_in",-        "description": "Contact 20; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P02R",+        "type": "passive",+        "description": "Split power contact P02R (position P02, right half), tail 5 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P3_1",-        "name": "21",-        "type": "power_in",-        "description": "Contact 21; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P03L",+        "type": "passive",+        "description": "Split power contact P03L (position P03, left half), tail 1 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P3_2",-        "name": "22",-        "type": "power_in",-        "description": "Contact 22; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P03L",+        "type": "passive",+        "description": "Split power contact P03L (position P03, left half), tail 2 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P3_3",-        "name": "23",-        "type": "power_in",-        "description": "Contact 23; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P03L",+        "type": "passive",+        "description": "Split power contact P03L (position P03, left half), tail 3 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P3_4",-        "name": "24",-        "type": "power_in",-        "description": "Contact 24; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P03L",+        "type": "passive",+        "description": "Split power contact P03L (position P03, left half), tail 4 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P3_5",-        "name": "25",-        "type": "power_in",-        "description": "Contact 25; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P03L",+        "type": "passive",+        "description": "Split power contact P03L (position P03, left half), tail 5 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P3_6",-        "name": "26",-        "type": "power_in",-        "description": "Contact 26; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P03R",+        "type": "passive",+        "description": "Split power contact P03R (position P03, right half), tail 1 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P3_7",-        "name": "27",-        "type": "power_in",-        "description": "Contact 27; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P03R",+        "type": "passive",+        "description": "Split power contact P03R (position P03, right half), tail 2 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P3_8",-        "name": "28",-        "type": "power_in",-        "description": "Contact 28; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P03R",+        "type": "passive",+        "description": "Split power contact P03R (position P03, right half), tail 3 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P3_9",-        "name": "29",-        "type": "power_in",-        "description": "Contact 29; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P03R",+        "type": "passive",+        "description": "Split power contact P03R (position P03, right half), tail 4 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       },       {         "number": "P3_10",-        "name": "30",-        "type": "power_in",-        "description": "Contact 30; position numbering per the manufacturer drawing. [from symbol]"+        "name": "P03R",+        "type": "passive",+        "description": "Split power contact P03R (position P03, right half), tail 5 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]"       }     ],     "provenance": {@@ -380,7 +379,9 @@         "url": "https://suddendocs.samtec.com/prints/et60t-xxx-x-xx-xxx-x-rx-x-x-mkt.pdf",         "pages": 11,         "sha256": "bdd47d4c66c7174d86d682f6971f939500cdb8edca1a3602bee87309cd340209",-        "source_tier": "mfr"+        "source_tier": "mfr",+        "retrieved": "2026-10-27",+        "edition": "ET60T-XXX-X-XX-XXX-X-RX-X-X print, Revision Y (sheet date 8/30/2023)"       },       "cad": "Footprint and symbol as used on Adom board designs; 3D model: Adom-generated 3D model built from the datasheet dimensions (simplified; CC-BY-SA 4.0); no vendor CAD is redistributed",       "pins": {@@ -451,9 +452,11 @@     "et60t-s03-5-05-000-s-r1-s.step",     "et60t-s03-5-05-000-s-r1-s.lbr",     "docs/hero.png",-    "docs/et60t-s03-5-05-000-s-r1-s-datasheet.pdf"+    "docs/et60t-s03-5-05-000-s-r1-s-datasheet.pdf",+    "et60t-s03-5-05-000-s-r1-s-hero.glb",+    "et60t-s03-5-05-000-s-r1-s-hero.overlay.json"   ],-  "visibility": {-    "public": false-  }+  "visibility": "public",+  "description": "Samtec Samtec ET60T series board connector (R1 right-angle), Samtec_ET60T-S03-5-05-000-S-R1-S. KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.",+  "org": "adom" }\ No newline at end of file
verification.json+83−4
@@ -9,7 +9,7 @@     "name": "Claude (AI build)",     "handle": "claude"    },-   "status": "open",+   "status": "superseded",    "title": "Automated build checks (awaiting human validation)",    "scope": [     "symbol",@@ -60,7 +60,7 @@     "name": "Claude (AI build)",     "handle": "claude"    },-   "status": "open",+   "status": "superseded",    "title": "Datasheet is the Samtec ET60T series print, not a part-specific drawing; confirm the S03-5...",    "scope": [     "review"@@ -83,7 +83,7 @@     "name": "Claude (AI build)",     "handle": "claude"    },-   "status": "open",+   "status": "superseded",    "title": "Footprint: a \"PCB Edge\" line on Dwgs.User marks the board front edge 7.90 mm from the peg ...",    "scope": [     "review"@@ -106,7 +106,7 @@     "name": "Claude (AI build)",     "handle": "claude"    },-   "status": "open",+   "status": "superseded",    "title": "Datasheet pins not matched to a symbol pin: P01L, P01R, P02L, P02R, P03L, P03R",    "scope": [     "review"@@ -122,6 +122,85 @@    ],    "evidence": [],    "files": {}+  },+  {+   "date": "2026-10-27",+   "by": {+    "name": "Claude, at Caleb Taylor's request",+    "handle": "claude"+   },+   "status": "verified",+   "title": "Validated against Samtec ET60T print Revision Y and recommended PCB layout ET60T-XXX-X-XX-XXX-X-RX-X-X-FOOTPRINT Revision P",+   "scope": [+    "symbol",+    "footprint",+    "3d",+    "pins"+   ],+   "variants": [+    "*"+   ],+   "checks": [+    {+     "text": "Datasheet: the page already carries Samtec's current ET60T print (Revision Y, sheet date 8/30/2023); sha256 bdd47d4c matches suddendocs.samtec.com/prints/et60t-xxx-x-xx-xxx-x-rx-x-x-mkt.pdf fetched 2026-10-27. Recommended layout checked against et60t-xxx-x-xx-xxx-x-rx-x-x-footprint.pdf Revision P (sheets 1, 3, 8)",+     "result": "pass"+    },+    {+     "text": "Part number decoded from the sheet 1 callout: S03 = split power, 3 positions, on the left; 5 signal rows; 05 positions per row; 000 = no power on the right; S = 30 µin gold; R1 = tail for .062 in PCB; S = side guide post; no -H (hot swap)",+     "result": "pass"+    },+    {+     "text": "Signal numbering per Fig 4 (p.3), Fig 18 (p.11) and footprint Fig 14: 01 at the left end of the row nearest the board front edge, left to right, rows away from the edge (01 / 03 / 15 labels). Footprint pads 1-25 follow that order (pad 1 at x 11.14, y 3.49 nearest the edge). Renamed signal pins from the board symbol's 31-55 to 01-25",+     "result": "pass"+    },+    {+     "text": "Split power per Fig 18 (p.11) and footprint Fig 14: P01L, P01R, P02L, P02R, P03L, P03R left to right, 3.50 mm between the halves, 8.00 mm between positions, 5 tails per half. Pads P1_1-5 / P1_6-10 / P2_1-5 / P2_6-10 / P3_1-5 / P3_6-10 renamed from 1-30 to P01L / P01R / P02L / P02R / P03L / P03R",+     "result": "pass"+    },+    {+     "text": "Pin types: all passive (connector contacts); power tails were power_in",+     "result": "pass"+    },+    {+     "text": "Footprint vs recommended layout: signal 5 x 5 at 2.00 mm pitch, drill 0.70 (Samtec 0.70 +-0.05 finished PTH), pad 1.00 vs 0.93; power drill 1.02 (Samtec 1.02 +-0.05), pad 1.53 vs 1.25, rows at 2.50 mm; left peg to P01L 5.50, P03R to the first signal column 5.64, last signal column to right peg 5.57, peg centreline to the signal row nearest the edge 4.99, peg centreline on the middle power row; PCB-edge line on Dwgs.User 7.90 mm from the peg centreline as Samtec sheet 1: all match",+     "result": "pass"+    },+    {+     "text": "3D body 51.21 x 29.25 x 14.48 mm against the print: envelope 3.32 / 3.68 REF outside the pegs (51.21), depth 29.25 REF, overhang 15.75 REF beyond the front edge (model: 22.15 - (-1.5) - 7.90 = 15.75), 10.00 above the board and 4.48 below vs 4.46 REF",+     "result": "pass"+    },+    {+     "text": "DigiKey and Mouser do not list this configuration",+     "result": "note"+    },+    {+     "text": "Guide-post holes set to Samtec's 3.20 mm NPTH (2 places, recommended PCB layout rev P); the source board used 3.40 mm",+     "result": "pass"+    },+    {+     "text": "Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL",+     "result": "pass"+    },+    {+     "text": "component-page-verify 0.2.0: all checks pass",+     "result": "pass"+    }+   ],+   "evidence": [+    {+     "label": "product print (Samtec)",+     "href": "https://suddendocs.samtec.com/prints/et60t-xxx-x-xx-xxx-x-rx-x-x-mkt.pdf"+    },+    {+     "label": "recommended PCB layout (Samtec)",+     "href": "https://suddendocs.samtec.com/prints/et60t-xxx-x-xx-xxx-x-rx-x-x-footprint.pdf"+    }+   ],+   "files": {+    "et60t-s03-5-05-000-s-r1-s.kicad_sym": "7c8ba8a73ec2661d215f34f2a50ac738cae7c51e1677b3b12967cb2e3f411c4c",+    "et60t-s03-5-05-000-s-r1-s.kicad_mod": "d955845871d10a2ce1da5cd033b2559b3aadc08657e4ecda99fe23722d6c6212",+    "et60t-s03-5-05-000-s-r1-s.step": "411a316b8d6c45510c68e1ccc48e3f841840e757320c8ccbc7d43cf2739829f5"+   }   }  ] }\ No newline at end of file