component

ET60T-S03-5-05-000-S-R1-S

Public Made by Adom

by adom

Samtec Samtec ET60T series board connector (R1 right-angle), Samtec_ET60T-S03-5-05-000-S-R1-S. KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.

componentconnectorset60t-s03-5-05-000-s-r1-sboard-derived

Verified ET60T-S03-5-05-000-S-R1-S

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 5 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against Samtec ET60T print Revision Y and recommended PCB layout ET60T-XXX-X-XX-XXX-X-RX-X-X-FOOTPRINT Revision Pfiles match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet: the page already carries Samtec's current ET60T print (Revision Y, sheet date 8/30/2023); sha256 bdd47d4c matches suddendocs.samtec.com/prints/et60t-xxx-x-xx-xxx-x-rx-x-x-mkt.pdf fetched 2026-10-27. Recommended layout checked against et60t-xxx-x-xx-xxx-x-rx-x-x-footprint.pdf Revision P (sheets 1, 3, 8)
  • ✓Part number decoded from the sheet 1 callout: S03 = split power, 3 positions, on the left; 5 signal rows; 05 positions per row; 000 = no power on the right; S = 30 µin gold; R1 = tail for .062 in PCB; S = side guide post; no -H (hot swap)
  • ✓Signal numbering per Fig 4 (p.3), Fig 18 (p.11) and footprint Fig 14: 01 at the left end of the row nearest the board front edge, left to right, rows away from the edge (01 / 03 / 15 labels). Footprint pads 1-25 follow that order (pad 1 at x 11.14, y 3.49 nearest the edge). Renamed signal pins from the board symbol's 31-55 to 01-25
  • ✓Split power per Fig 18 (p.11) and footprint Fig 14: P01L, P01R, P02L, P02R, P03L, P03R left to right, 3.50 mm between the halves, 8.00 mm between positions, 5 tails per half. Pads P1_1-5 / P1_6-10 / P2_1-5 / P2_6-10 / P3_1-5 / P3_6-10 renamed from 1-30 to P01L / P01R / P02L / P02R / P03L / P03R
  • ✓Pin types: all passive (connector contacts); power tails were power_in
  • ✓Footprint vs recommended layout: signal 5 x 5 at 2.00 mm pitch, drill 0.70 (Samtec 0.70 +-0.05 finished PTH), pad 1.00 vs 0.93; power drill 1.02 (Samtec 1.02 +-0.05), pad 1.53 vs 1.25, rows at 2.50 mm; left peg to P01L 5.50, P03R to the first signal column 5.64, last signal column to right peg 5.57, peg centreline to the signal row nearest the edge 4.99, peg centreline on the middle power row; PCB-edge line on Dwgs.User 7.90 mm from the peg centreline as Samtec sheet 1: all match
  • ✓3D body 51.21 x 29.25 x 14.48 mm against the print: envelope 3.32 / 3.68 REF outside the pegs (51.21), depth 29.25 REF, overhang 15.75 REF beyond the front edge (model: 22.15 - (-1.5) - 7.90 = 15.75), 10.00 above the board and 4.48 below vs 4.46 REF
  • •DigiKey and Mouser do not list this configuration
  • ✓Guide-post holes set to Samtec's 3.20 mm NPTH (2 places, recommended PCB layout rev P); the source board used 3.40 mm
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify 0.2.0: all checks pass
Evidenceproduct print (Samtec)recommended PCB layout (Samtec)
Verified files✓ et60t-s03-5-05-000-s-r1-s.kicad_sym✓ et60t-s03-5-05-000-s-r1-s.kicad_mod✓ et60t-s03-5-05-000-s-r1-s.step
9 Oct 2026Claude (AI build)Datasheet pins not matched to a symbol pin: P01L, P01R, P02L, P02R, P03L, P03Rsuperseded
reviewfor all variants
  • •Datasheet pins not matched to a symbol pin: P01L, P01R, P02L, P02R, P03L, P03R
9 Oct 2026Claude (AI build)Footprint: a "PCB Edge" line on Dwgs.User marks the board front edge 7.90 mm from the peg ...superseded
reviewfor all variants
  • •Footprint: a "PCB Edge" line on Dwgs.User marks the board front edge 7.90 mm from the peg centreline (Samtec recommended PCB layout ET60T-XXX-X-XX-XXX-X-RX-X-X-FOOTPRINT rev P, sheet 1); documentation only, nothing is cut.
9 Oct 2026Claude (AI build)Datasheet is the Samtec ET60T series print, not a part-specific drawing; confirm the S03-5...superseded
reviewfor all variants
  • •Datasheet is the Samtec ET60T series print, not a part-specific drawing; confirm the S03-5-05-000-S-R1-S options against its ordering tables.
9 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • ✓55 of 55 pins described from the datasheet (adom-ds2sf, page-cited)
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! et60t-s03-5-05-000-s-r1-s.kicad_sym! et60t-s03-5-05-000-s-r1-s.kicad_mod✓ et60t-s03-5-05-000-s-r1-s.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
et60t-s03-5-05-000-s-r1-s / README.md
History Download
Caleb Publish 0.1.1 15cfa50 1d ago

ET60T-S03-5-05-000-S-R1-S

Samtec · Samtec ET60T series board connector (R1 right-angle) · Samtec_ET60T-S03-5-05-000-S-R1-S

ET60T-S03-5-05-000-S-R1-S from Samtec, in a Samtec_ET60T-S03-5-05-000-S-R1-S. Symbol, footprint and 3D model are the ones used on Adom board designs (3D model: Adom-generated 3D model built from the datasheet dimensions (simplified; CC-BY-SA 4.0); no vendor CAD is redistributed). Pin functions are extracted from the manufacturer datasheet with page references.

Pinout

Pin Name Type Function
1 01 passive Signal contact 01; numbering per the manufacturer drawing: 5 rows x 5 positions at 2.00 mm pitch, 01 at the left end of the row nearest the board front edge, counting left to right along each row and then row by row away from the edge (Fig 4). [datasheet p.3]
2 02 passive Signal contact 02; numbering per the manufacturer drawing. [datasheet p.3]
3 03 passive Signal contact 03; numbering per the manufacturer drawing. [datasheet p.3]
4 04 passive Signal contact 04; numbering per the manufacturer drawing. [datasheet p.3]
5 05 passive Signal contact 05; numbering per the manufacturer drawing. [datasheet p.3]
6 06 passive Signal contact 06; numbering per the manufacturer drawing. [datasheet p.3]
7 07 passive Signal contact 07; numbering per the manufacturer drawing. [datasheet p.3]
8 08 passive Signal contact 08; numbering per the manufacturer drawing. [datasheet p.3]
9 09 passive Signal contact 09; numbering per the manufacturer drawing. [datasheet p.3]
10 10 passive Signal contact 10; numbering per the manufacturer drawing. [datasheet p.3]
11 11 passive Signal contact 11; numbering per the manufacturer drawing. [datasheet p.3]
12 12 passive Signal contact 12; numbering per the manufacturer drawing. [datasheet p.3]
13 13 passive Signal contact 13; numbering per the manufacturer drawing. [datasheet p.3]
14 14 passive Signal contact 14; numbering per the manufacturer drawing. [datasheet p.3]
15 15 passive Signal contact 15; numbering per the manufacturer drawing. [datasheet p.3]
16 16 passive Signal contact 16; numbering per the manufacturer drawing. [datasheet p.3]
17 17 passive Signal contact 17; numbering per the manufacturer drawing. [datasheet p.3]
18 18 passive Signal contact 18; numbering per the manufacturer drawing. [datasheet p.3]
19 19 passive Signal contact 19; numbering per the manufacturer drawing. [datasheet p.3]
20 20 passive Signal contact 20; numbering per the manufacturer drawing. [datasheet p.3]
21 21 passive Signal contact 21; numbering per the manufacturer drawing. [datasheet p.3]
22 22 passive Signal contact 22; numbering per the manufacturer drawing. [datasheet p.3]
23 23 passive Signal contact 23; numbering per the manufacturer drawing. [datasheet p.3]
24 24 passive Signal contact 24; numbering per the manufacturer drawing. [datasheet p.3]
25 25 passive Signal contact 25; numbering per the manufacturer drawing. [datasheet p.3]
P1_1 P01L passive Split power contact P01L (position P01, left half), tail 1 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]
P1_2 P01L passive Split power contact P01L (position P01, left half), tail 2 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]
P1_3 P01L passive Split power contact P01L (position P01, left half), tail 3 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]
P1_4 P01L passive Split power contact P01L (position P01, left half), tail 4 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]
P1_5 P01L passive Split power contact P01L (position P01, left half), tail 5 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]
P1_6 P01R passive Split power contact P01R (position P01, right half), tail 1 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]
P1_7 P01R passive Split power contact P01R (position P01, right half), tail 2 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]
P1_8 P01R passive Split power contact P01R (position P01, right half), tail 3 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]
P1_9 P01R passive Split power contact P01R (position P01, right half), tail 4 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]
P1_10 P01R passive Split power contact P01R (position P01, right half), tail 5 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]
P2_1 P02L passive Split power contact P02L (position P02, left half), tail 1 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]
P2_2 P02L passive Split power contact P02L (position P02, left half), tail 2 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]
P2_3 P02L passive Split power contact P02L (position P02, left half), tail 3 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]
P2_4 P02L passive Split power contact P02L (position P02, left half), tail 4 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]
P2_5 P02L passive Split power contact P02L (position P02, left half), tail 5 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]
P2_6 P02R passive Split power contact P02R (position P02, right half), tail 1 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]
P2_7 P02R passive Split power contact P02R (position P02, right half), tail 2 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]
P2_8 P02R passive Split power contact P02R (position P02, right half), tail 3 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]
P2_9 P02R passive Split power contact P02R (position P02, right half), tail 4 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]
P2_10 P02R passive Split power contact P02R (position P02, right half), tail 5 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]
P3_1 P03L passive Split power contact P03L (position P03, left half), tail 1 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]
P3_2 P03L passive Split power contact P03L (position P03, left half), tail 2 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]
P3_3 P03L passive Split power contact P03L (position P03, left half), tail 3 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]
P3_4 P03L passive Split power contact P03L (position P03, left half), tail 4 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]
P3_5 P03L passive Split power contact P03L (position P03, left half), tail 5 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]
P3_6 P03R passive Split power contact P03R (position P03, right half), tail 1 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]
P3_7 P03R passive Split power contact P03R (position P03, right half), tail 2 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]
P3_8 P03R passive Split power contact P03R (position P03, right half), tail 3 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]
P3_9 P03R passive Split power contact P03R (position P03, right half), tail 4 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]
P3_10 P03R passive Split power contact P03R (position P03, right half), tail 5 of 5 counted from the board front edge; naming per the manufacturer drawing. [datasheet p.11]

Key specifications

Parameter Value
Manufacturer Samtec
Package Samtec_ET60T-S03-5-05-000-S-R1-S
Category Connectors
Pins 55

CAD

  • Symbol: et60t-s03-5-05-000-s-r1-s (source library Samtec_CDT:Samtec_ET60T-S03-5-05-000-S-R1-S)
  • Footprint: Samtec_CDT:Samtec_ET60T-S03-5-05-000-S-R1-S
  • 3D model path in footprint: ${KIPRJMOD}/et60t-s03-5-05-000-s-r1-s.step
  • 3D files: et60t-s03-5-05-000-s-r1-s.step / et60t-s03-5-05-000-s-r1-s.glb.
  • EAGLE/Fusion library: et60t-s03-5-05-000-s-r1-s.lbr (adom-lbr)

Provenance

  • Datasheet: Samtec ET60T-XXX-X-XX-XXX-X-RX-X-X product print (ET60T-XXX-X-XX-XXX-X-RX-X-X print, Revision Y (sheet date 8/30/2023), sha256 bdd47d4c66c7174d, retrieved 2026-10-27, tier: mfr)
  • CAD: Footprint and symbol as used on Adom board designs; 3D model: Adom-generated 3D model built from the datasheet dimensions (simplified; CC-BY-SA 4.0); no vendor CAD is redistributed.
  • Pins: KiCad symbol from the source board + adom-ds2sf datasheet extraction (claude-opus-4-7).

Datasheet PDF