component
ET60S-S03-5-05-000-S-R1-S
Public Made by Adomby adom
Samtec Samtec ET60S series board connector (R1 right-angle), Samtec_ET60S-S03-5-05-000-S-R1-S. KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownET60S-S03-5-05-000-S-R1-S
Samtec · Samtec ET60S series board connector (R1 right-angle) · Samtec_ET60S-S03-5-05-000-S-R1-S
ET60S-S03-5-05-000-S-R1-S from Samtec, in a Samtec_ET60S-S03-5-05-000-S-R1-S. Symbol, footprint and 3D model are the ones used on Adom board designs (3D model: Adom-generated 3D model built from the datasheet dimensions (simplified; CC-BY-SA 4.0); no vendor CAD is redistributed). Pin functions are extracted from the manufacturer datasheet with page references.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 01 | passive | Signal contact 01; numbering per the manufacturer drawing: 5 rows x 5 positions at 2.00 mm pitch, 01 at the right end of the row nearest the board front edge, counting right to left along each row and then row by row away from the edge (Fig 4). [datasheet p.3] |
| 2 | 02 | passive | Signal contact 02; numbering per the manufacturer drawing. [datasheet p.3] |
| 3 | 03 | passive | Signal contact 03; numbering per the manufacturer drawing. [datasheet p.3] |
| 4 | 04 | passive | Signal contact 04; numbering per the manufacturer drawing. [datasheet p.3] |
| 5 | 05 | passive | Signal contact 05; numbering per the manufacturer drawing. [datasheet p.3] |
| 6 | 06 | passive | Signal contact 06; numbering per the manufacturer drawing. [datasheet p.3] |
| 7 | 07 | passive | Signal contact 07; numbering per the manufacturer drawing. [datasheet p.3] |
| 8 | 08 | passive | Signal contact 08; numbering per the manufacturer drawing. [datasheet p.3] |
| 9 | 09 | passive | Signal contact 09; numbering per the manufacturer drawing. [datasheet p.3] |
| 10 | 10 | passive | Signal contact 10; numbering per the manufacturer drawing. [datasheet p.3] |
| 11 | 11 | passive | Signal contact 11; numbering per the manufacturer drawing. [datasheet p.3] |
| 12 | 12 | passive | Signal contact 12; numbering per the manufacturer drawing. [datasheet p.3] |
| 13 | 13 | passive | Signal contact 13; numbering per the manufacturer drawing. [datasheet p.3] |
| 14 | 14 | passive | Signal contact 14; numbering per the manufacturer drawing. [datasheet p.3] |
| 15 | 15 | passive | Signal contact 15; numbering per the manufacturer drawing. [datasheet p.3] |
| 16 | 16 | passive | Signal contact 16; numbering per the manufacturer drawing. [datasheet p.3] |
| 17 | 17 | passive | Signal contact 17; numbering per the manufacturer drawing. [datasheet p.3] |
| 18 | 18 | passive | Signal contact 18; numbering per the manufacturer drawing. [datasheet p.3] |
| 19 | 19 | passive | Signal contact 19; numbering per the manufacturer drawing. [datasheet p.3] |
| 20 | 20 | passive | Signal contact 20; numbering per the manufacturer drawing. [datasheet p.3] |
| 21 | 21 | passive | Signal contact 21; numbering per the manufacturer drawing. [datasheet p.3] |
| 22 | 22 | passive | Signal contact 22; numbering per the manufacturer drawing. [datasheet p.3] |
| 23 | 23 | passive | Signal contact 23; numbering per the manufacturer drawing. [datasheet p.3] |
| 24 | 24 | passive | Signal contact 24; numbering per the manufacturer drawing. [datasheet p.3] |
| 25 | 25 | passive | Signal contact 25; numbering per the manufacturer drawing. [datasheet p.3] |
| P1_1 | P01 | passive | Split power position P01, outer tail column (the one farther from the signal block), tail 1 of 5 counted from the board front edge; the print labels the position P01 but does not name the two split halves. [datasheet p.10] |
| P1_2 | P01 | passive | Split power position P01, outer tail column (the one farther from the signal block), tail 2 of 5 counted from the board front edge; the print labels the position P01 but does not name the two split halves. [datasheet p.10] |
| P1_3 | P01 | passive | Split power position P01, outer tail column (the one farther from the signal block), tail 3 of 5 counted from the board front edge; the print labels the position P01 but does not name the two split halves. [datasheet p.10] |
| P1_4 | P01 | passive | Split power position P01, outer tail column (the one farther from the signal block), tail 4 of 5 counted from the board front edge; the print labels the position P01 but does not name the two split halves. [datasheet p.10] |
| P1_5 | P01 | passive | Split power position P01, outer tail column (the one farther from the signal block), tail 5 of 5 counted from the board front edge; the print labels the position P01 but does not name the two split halves. [datasheet p.10] |
| P1_6 | P01 | passive | Split power position P01, inner tail column (the one nearer to the signal block), tail 1 of 5 counted from the board front edge; the print labels the position P01 but does not name the two split halves. [datasheet p.10] |
| P1_7 | P01 | passive | Split power position P01, inner tail column (the one nearer to the signal block), tail 2 of 5 counted from the board front edge; the print labels the position P01 but does not name the two split halves. [datasheet p.10] |
| P1_8 | P01 | passive | Split power position P01, inner tail column (the one nearer to the signal block), tail 3 of 5 counted from the board front edge; the print labels the position P01 but does not name the two split halves. [datasheet p.10] |
| P1_9 | P01 | passive | Split power position P01, inner tail column (the one nearer to the signal block), tail 4 of 5 counted from the board front edge; the print labels the position P01 but does not name the two split halves. [datasheet p.10] |
| P1_10 | P01 | passive | Split power position P01, inner tail column (the one nearer to the signal block), tail 5 of 5 counted from the board front edge; the print labels the position P01 but does not name the two split halves. [datasheet p.10] |
| P2_1 | P02 | passive | Split power position P02, outer tail column (the one farther from the signal block), tail 1 of 5 counted from the board front edge; the print labels the position P02 but does not name the two split halves. [datasheet p.10] |
| P2_2 | P02 | passive | Split power position P02, outer tail column (the one farther from the signal block), tail 2 of 5 counted from the board front edge; the print labels the position P02 but does not name the two split halves. [datasheet p.10] |
| P2_3 | P02 | passive | Split power position P02, outer tail column (the one farther from the signal block), tail 3 of 5 counted from the board front edge; the print labels the position P02 but does not name the two split halves. [datasheet p.10] |
| P2_4 | P02 | passive | Split power position P02, outer tail column (the one farther from the signal block), tail 4 of 5 counted from the board front edge; the print labels the position P02 but does not name the two split halves. [datasheet p.10] |
| P2_5 | P02 | passive | Split power position P02, outer tail column (the one farther from the signal block), tail 5 of 5 counted from the board front edge; the print labels the position P02 but does not name the two split halves. [datasheet p.10] |
| P2_6 | P02 | passive | Split power position P02, inner tail column (the one nearer to the signal block), tail 1 of 5 counted from the board front edge; the print labels the position P02 but does not name the two split halves. [datasheet p.10] |
| P2_7 | P02 | passive | Split power position P02, inner tail column (the one nearer to the signal block), tail 2 of 5 counted from the board front edge; the print labels the position P02 but does not name the two split halves. [datasheet p.10] |
| P2_8 | P02 | passive | Split power position P02, inner tail column (the one nearer to the signal block), tail 3 of 5 counted from the board front edge; the print labels the position P02 but does not name the two split halves. [datasheet p.10] |
| P2_9 | P02 | passive | Split power position P02, inner tail column (the one nearer to the signal block), tail 4 of 5 counted from the board front edge; the print labels the position P02 but does not name the two split halves. [datasheet p.10] |
| P2_10 | P02 | passive | Split power position P02, inner tail column (the one nearer to the signal block), tail 5 of 5 counted from the board front edge; the print labels the position P02 but does not name the two split halves. [datasheet p.10] |
| P3_1 | P03 | passive | Split power position P03, outer tail column (the one farther from the signal block), tail 1 of 5 counted from the board front edge; the print labels the position P03 but does not name the two split halves. [datasheet p.10] |
| P3_2 | P03 | passive | Split power position P03, outer tail column (the one farther from the signal block), tail 2 of 5 counted from the board front edge; the print labels the position P03 but does not name the two split halves. [datasheet p.10] |
| P3_3 | P03 | passive | Split power position P03, outer tail column (the one farther from the signal block), tail 3 of 5 counted from the board front edge; the print labels the position P03 but does not name the two split halves. [datasheet p.10] |
| P3_4 | P03 | passive | Split power position P03, outer tail column (the one farther from the signal block), tail 4 of 5 counted from the board front edge; the print labels the position P03 but does not name the two split halves. [datasheet p.10] |
| P3_5 | P03 | passive | Split power position P03, outer tail column (the one farther from the signal block), tail 5 of 5 counted from the board front edge; the print labels the position P03 but does not name the two split halves. [datasheet p.10] |
| P3_6 | P03 | passive | Split power position P03, inner tail column (the one nearer to the signal block), tail 1 of 5 counted from the board front edge; the print labels the position P03 but does not name the two split halves. [datasheet p.10] |
| P3_7 | P03 | passive | Split power position P03, inner tail column (the one nearer to the signal block), tail 2 of 5 counted from the board front edge; the print labels the position P03 but does not name the two split halves. [datasheet p.10] |
| P3_8 | P03 | passive | Split power position P03, inner tail column (the one nearer to the signal block), tail 3 of 5 counted from the board front edge; the print labels the position P03 but does not name the two split halves. [datasheet p.10] |
| P3_9 | P03 | passive | Split power position P03, inner tail column (the one nearer to the signal block), tail 4 of 5 counted from the board front edge; the print labels the position P03 but does not name the two split halves. [datasheet p.10] |
| P3_10 | P03 | passive | Split power position P03, inner tail column (the one nearer to the signal block), tail 5 of 5 counted from the board front edge; the print labels the position P03 but does not name the two split halves. [datasheet p.10] |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Samtec |
| Package | Samtec_ET60S-S03-5-05-000-S-R1-S |
| Category | Connectors |
| Pins | 55 |
CAD
- Symbol:
et60s-s03-5-05-000-s-r1-s(source librarySamtec_CDT:Samtec_ET60S-S03-5-05-000-S-R1-S) - Footprint:
Samtec_CDT:Samtec_ET60S-S03-5-05-000-S-R1-S - 3D model path in footprint:
${KIPRJMOD}/et60s-s03-5-05-000-s-r1-s.step - 3D files:
et60s-s03-5-05-000-s-r1-s.step/et60s-s03-5-05-000-s-r1-s.glb. - EAGLE/Fusion library:
et60s-s03-5-05-000-s-r1-s.lbr(adom-lbr)
Provenance
- Datasheet: Samtec ET60S-XXX-X-XX-XXX-X-RX-X product print (ET60S-XXX-X-XX-XXX-X-RX-X print, Revision S (sheet date 9/4/2023), sha256
1235d0e5868fafc7, retrieved 2026-10-27, tier: mfr) - CAD: Footprint and symbol as used on Adom board designs; 3D model: Adom-generated 3D model built from the datasheet dimensions (simplified; CC-BY-SA 4.0); no vendor CAD is redistributed.
- Pins: KiCad symbol from the source board + adom-ds2sf datasheet extraction (claude-opus-4-7).