main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs drv8847rter: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers drv8847rter: viewers · Ray
drv8847rter-etched.fit.json drv8847rter: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
drv8847rter-etched.glb drv8847rter: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
drv8847rter-etched.step drv8847rter: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
drv8847rter.glb Publish 0.1.0 · Ray
drv8847rter.kicad_mod Publish 0.1.0 · Ray
drv8847rter.kicad_sym Publish 0.1.0 · Ray
drv8847rter.lbr Publish 0.1.0 · Ray
drv8847rter.step Publish 0.1.0 · Ray
package.json drv8847rter: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json drv8847rter: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/drv8847rter · Ray

DRV8847RTER

Texas Instruments · Stepper Motor Driver · WQFN-16-EP(3x3)

DRV8847RTER from Texas Instruments, in a WQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ISEN12 output Full-bridge 12 current sensing output. Connect this pin to current-sensing resistor for full-bridge 12, or to GND if current regulation is not needed.
2 OUT2 output Half-bridge output 2 for motor phase control.
3 OUT4 output Half-bridge output 4 for motor phase control.
4 ISEN34 output Full-bridge 34 current sensing output. Connect this pin to current-sensing resistor for full-bridge 34, or to GND if current regulation is not needed.
5 OUT3 output Half-bridge output 3 for motor phase control.
6 nFAULT tri_state Fault indication pin pulled to logic low under fault, overtemp, or UVLO conditions; open-drain output requiring external pull-up resistor.
7 IN3 input Half-bridge input 3 for PWM gate drive control.
8 IN4 input Half-bridge input 4 for PWM gate drive control.
9 TRQ input Torque current scalar input; pull low for 100% torque or high for 50% torque scaling of output current.
10 VM power_in Motor power supply input; bypass to ground using 0.1µF ceramic and 10µF minimum capacitors rated at VM voltage.
11 GND power_in Device ground reference. Ground the GND pin and exposed thermal pad for proper thermal and electrical performance.
12 MODE input Three-state pin for bridge configuration selection: grounded for 4-pin mode, high for 2-pin mode, high for parallel mode, or floating for independent bridge mode.
13 IN2 input Half-bridge input 2 for PWM gate drive control.
14 IN1 input Half-bridge input 1 for PWM gate drive control.
15 nSLEEP input Sleep mode control input; set high to enable device operation, set low to enter low-power sleep mode with 1.7µA quiescent current.
16 OUT1 output Half-bridge output 1 for motor phase control.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WQFN-16-EP(3x3)
Category Motor Driver ICs
Pins 17

CAD (KiCad official)

  • Symbol: DRV8847RTER
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: WQFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: drv8847rter-etched.step / drv8847rter-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); drv8847rter.step / drv8847rter.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (86 pp, sha256 d437440025a3c724, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF