main
Ray drv8847rter: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 1574aee
{
  "schema_version": 1,
  "type": "component",
  "slug": "drv8847rter",
  "title": "DRV8847RTER",
  "brief": "Texas Instruments Stepper Motor Driver, WQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "motor driver ics",
    "drv8847rter",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "DRV8847RTER",
    "manufacturer": "Texas Instruments",
    "package": "WQFN-16-EP(3x3)",
    "pin_count": 17,
    "category": "Motor Driver ICs",
    "subcategory": "Stepper Motor Driver",
    "datasheet": "https://www.ti.com/cn/lit/gpn/drv8847",
    "parts": {
      "symbol": "drv8847rter.kicad_sym",
      "footprint": "drv8847rter.kicad_mod",
      "model_3d": "drv8847rter-etched.glb",
      "model_3d_plain": "drv8847rter.glb",
      "model_3d_step": "drv8847rter-etched.step",
      "model_3d_step_plain": "drv8847rter.step",
      "lbr": "drv8847rter.lbr"
    },
    "distributor_links": {
      "lcsc": "C2872056"
    },
    "pins": [
      {
        "number": "1",
        "name": "ISEN12",
        "type": "output",
        "description": "Full-bridge 12 current sensing output. Connect this pin to current-sensing resistor for full-bridge 12, or to GND if current regulation is not needed."
      },
      {
        "number": "2",
        "name": "OUT2",
        "type": "output",
        "description": "Half-bridge output 2 for motor phase control."
      },
      {
        "number": "3",
        "name": "OUT4",
        "type": "output",
        "description": "Half-bridge output 4 for motor phase control."
      },
      {
        "number": "4",
        "name": "ISEN34",
        "type": "output",
        "description": "Full-bridge 34 current sensing output. Connect this pin to current-sensing resistor for full-bridge 34, or to GND if current regulation is not needed."
      },
      {
        "number": "5",
        "name": "OUT3",
        "type": "output",
        "description": "Half-bridge output 3 for motor phase control."
      },
      {
        "number": "6",
        "name": "nFAULT",
        "type": "tri_state",
        "description": "Fault indication pin pulled to logic low under fault, overtemp, or UVLO conditions; open-drain output requiring external pull-up resistor."
      },
      {
        "number": "7",
        "name": "IN3",
        "type": "input",
        "description": "Half-bridge input 3 for PWM gate drive control."
      },
      {
        "number": "8",
        "name": "IN4",
        "type": "input",
        "description": "Half-bridge input 4 for PWM gate drive control."
      },
      {
        "number": "9",
        "name": "TRQ",
        "type": "input",
        "description": "Torque current scalar input; pull low for 100% torque or high for 50% torque scaling of output current."
      },
      {
        "number": "10",
        "name": "VM",
        "type": "power_in",
        "description": "Motor power supply input; bypass to ground using 0.1µF ceramic and 10µF minimum capacitors rated at VM voltage."
      },
      {
        "number": "11",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground reference. Ground the GND pin and exposed thermal pad for proper thermal and electrical performance."
      },
      {
        "number": "12",
        "name": "MODE",
        "type": "input",
        "description": "Three-state pin for bridge configuration selection: grounded for 4-pin mode, high for 2-pin mode, high for parallel mode, or floating for independent bridge mode."
      },
      {
        "number": "13",
        "name": "IN2",
        "type": "input",
        "description": "Half-bridge input 2 for PWM gate drive control."
      },
      {
        "number": "14",
        "name": "IN1",
        "type": "input",
        "description": "Half-bridge input 1 for PWM gate drive control."
      },
      {
        "number": "15",
        "name": "nSLEEP",
        "type": "input",
        "description": "Sleep mode control input; set high to enable device operation, set low to enter low-power sleep mode with 1.7µA quiescent current."
      },
      {
        "number": "16",
        "name": "OUT1",
        "type": "output",
        "description": "Half-bridge output 1 for motor phase control."
      },
      {
        "number": "17",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Table 5-1 shows '—' for MODE (pin 14) and TRQ (pin 11) in WQFN column, suggesting these pins might n; DRV88471 WQFN variant (Figure 5-5, Table 5-2) shows pins 9 and 12 as NC (no connect) instead of TRQ ; The RTE package suffix denotes WQFN with exposed thermal pad. Ensure thermal pad is properly soldere",
          "exposed pad 17 added from the footprint"
        ],
        "pages_sent": 86,
        "cost_usd": 0.997,
        "at": "2026-09-23T02:26:05"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/drv8847",
        "pages": 86,
        "sha256": "d437440025a3c724",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 17,
        "described": 17,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "drv8847rter.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3,
          3,
          0.785
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "drv8847rter-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3,
          3,
          0.785
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "88afba5d26fcfca4b7f1b511f7edafa15c54e8f174d157ef50d02c1ad8f9c526",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "WQFN-16-EP(3x3)",
      "Category": "Motor Driver ICs",
      "Pins": "17"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "drv8847rter"
  ],
  "discovery_pitch": "DRV8847RTER (Texas Instruments) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "drv8847rter.kicad_sym",
    "drv8847rter.kicad_mod",
    "drv8847rter.glb",
    "drv8847rter.step",
    "drv8847rter.lbr",
    "docs/hero.png",
    "docs/drv8847rter-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-24T20:02:30.629Z"
}