DRV8800PWPR

{
  "slug": "drv8800pwpr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Brushed DC Motor Drivers, TSSOP-16-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "motor driver ics",
    "drv8800pwpr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "drv8800pwpr.kicad_sym",
    "drv8800pwpr.kicad_mod",
    "drv8800pwpr.glb",
    "drv8800pwpr.step",
    "drv8800pwpr.lbr",
    "docs/hero.png",
    "docs/drv8800pwpr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "DRV8800PWPR",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-16-EP",
    "pin_count": 17,
    "category": "Motor Driver ICs",
    "subcategory": "Brushed DC Motor Drivers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/drv8800",
    "parts": {
      "symbol": "drv8800pwpr.kicad_sym",
      "footprint": "drv8800pwpr.kicad_mod",
      "model_3d": "drv8800pwpr-etched.glb",
      "model_3d_plain": "drv8800pwpr.glb",
      "model_3d_step": "drv8800pwpr-etched.step",
      "model_3d_step_plain": "drv8800pwpr.step",
      "lbr": "drv8800pwpr.lbr"
    },
    "distributor_links": {
      "lcsc": "C32579"
    },
    "pins": [
      {
        "number": "1",
        "name": "nFAULT",
        "type": "output",
        "description": "Open-drain fault output, pulled low on motor fault, supply undervoltage, or junction temperature exceeding 160°C; requires external pullup resistor."
      },
      {
        "number": "2",
        "name": "MODE",
        "type": "input",
        "description": "Mode selection input. Logic high selects slow-decay mode, logic low selects fast-decay mode. Input threshold VIH ≥ 2V, VIL ≤ 0.8V."
      },
      {
        "number": "3",
        "name": "PHASE",
        "type": "input",
        "description": "Phase/direction control input. Logic high = forward, logic low = reverse. Controls H-bridge direction. Input threshold VIH ≥ 2V, VIL ≤ 0.8V."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground and return path for power supply and signal circuits."
      },
      {
        "number": "5",
        "name": "nSLEEP",
        "type": "input",
        "description": "Sleep mode enable input. Logic high enables device operation, logic low enters low-power sleep mode with <10µA quiescent current. Internal pulldown resistor. Input threshold VIH ≥ 2.7V, VIL ≤ 0.8V."
      },
      {
        "number": "6",
        "name": "ENABLE",
        "type": "input",
        "description": "Output enable control input. Logic high enables H-bridge, logic low disables output. Input threshold VIH ≥ 2V, VIL ≤ 0.8V."
      },
      {
        "number": "7",
        "name": "OUT+",
        "type": "output",
        "description": "H-bridge positive output to motor. Rated for ±2.8A peak current, typical RDS(on) = 0.4Ω at 25°C, 0.7Ω at 125°C."
      },
      {
        "number": "8",
        "name": "SENSE",
        "type": "output",
        "description": "Current sense return output. Connect external 0.2Ω sense resistor between SENSE pin and ground to set overcurrent threshold at 500mV (2.8A typical); adjustable via RSENSE value."
      },
      {
        "number": "9",
        "name": "VBB",
        "type": "power_in",
        "description": "Motor driver supply voltage input, operating range 8V to 36V. Bypass to GND with 0.1µF ceramic + 100µF bulk capacitor. Undervoltage lockout threshold 6.5V rising."
      },
      {
        "number": "10",
        "name": "OUT-",
        "type": "output",
        "description": "H-bridge negative output to motor. Rated for ±2.8A peak current, typical RDS(on) = 0.4Ω at 25°C, 0.7Ω at 125°C."
      },
      {
        "number": "11",
        "name": "CP1",
        "type": "passive",
        "description": "Charge pump switching node. Connect 0.1µF X7R ceramic capacitor between CP1 and CP2; capacitor must be rated for VBB voltage."
      },
      {
        "number": "12",
        "name": "CP2",
        "type": "passive",
        "description": "Charge pump switching node. Connect 0.1µF X7R ceramic capacitor between CP1 and CP2; capacitor must be rated for VBB voltage."
      },
      {
        "number": "13",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground and return path for power supply and signal circuits."
      },
      {
        "number": "14",
        "name": "VCP",
        "type": "power_out",
        "description": "Charge pump output and gate drive supply reservoir. Connect 0.1µF 16V X7R ceramic capacitor to VBB. Monitored internally; outputs disable if VCP falls below charge pump undervoltage threshold."
      },
      {
        "number": "15",
        "name": "VREG",
        "type": "output",
        "description": "Regulated 7.5V reference voltage output. Leave disconnected in normal operation; provides internal regulator voltage reference measurement point. Do not load."
      },
      {
        "number": "16",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection. Must remain unconnected to any circuit node."
      },
      {
        "number": "17",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: PowerPAD exposed pad designated as 'EP' per industry convention for exposed pad; datasheet does not ",
          "exposed pad 17 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 40,
        "cost_usd": 0.4216,
        "at": "2026-09-21T23:31:23"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/drv8800",
        "pages": 40,
        "sha256": "8498d1c74347b1a9",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 17,
        "described": 17,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "drv8800pwpr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "7982746831c0bd23f4690608869ad67776faae5c762fb0376666126a3998921b",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "drv8800pwpr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "2b1ad71504bea5eb595decd390cfa479e77b7683640c76b997911d3fd823a6ca",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}