main
Ray
drv411airgpr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
e9b59a7
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284
{
"schema_version": 1,
"type": "component",
"slug": "drv411airgpr",
"title": "DRV411AIRGPR",
"brief": "Texas Instruments ADCs/DACs - Special Purpose, QFN-20(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"data acquisition",
"drv411airgpr",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "DRV411AIRGPR",
"manufacturer": "Texas Instruments",
"package": "QFN-20(4x4)",
"pin_count": 21,
"category": "Data Acquisition",
"subcategory": "ADCs/DACs - Special Purpose",
"datasheet": "https://www.ti.com/cn/lit/gpn/drv411",
"parts": {
"symbol": "drv411airgpr.kicad_sym",
"footprint": "drv411airgpr.kicad_mod",
"model_3d": "drv411airgpr-etched.glb",
"model_3d_plain": "drv411airgpr.glb",
"model_3d_step": "drv411airgpr-etched.step",
"model_3d_step_plain": "drv411airgpr.step",
"lbr": "drv411airgpr.lbr"
},
"distributor_links": {
"lcsc": "C543037"
},
"pins": [
{
"number": "1",
"name": "OR",
"type": "tri_state",
"description": "Open-drain output indicating differential amplifier overrange condition when output signal clips; requires external pull-up resistor"
},
{
"number": "2",
"name": "REFSEL2",
"type": "input",
"description": "Digital CMOS input for reference voltage selection; used with REFSEL1 to select 2.5V fixed, 1.65V fixed, or 50% VDD ratiometric mode"
},
{
"number": "3",
"name": "REFSEL1",
"type": "input",
"description": "Digital CMOS input for reference voltage selection; used with REFSEL2 to select 2.5V fixed, 1.65V fixed, or 50% VDD ratiometric mode"
},
{
"number": "4",
"name": "REFOUT",
"type": "output",
"description": "Output terminal for selected buffered reference voltage (2.5V, 1.65V, or VDD/2) with load regulation 0.15-0.35 mV/mA and ±5 mA sink/source capability"
},
{
"number": "5",
"name": "REFIN",
"type": "input",
"description": "Input for zero reference to differential amplifier with 50 kΩ input impedance; normally connect to REFOUT or external reference with optional 4×RSHUNT dummy shunt for CMR"
},
{
"number": "6",
"name": "VOUT",
"type": "output",
"description": "Output of differential amplifier with 4 V/V gain, 2 MHz bandwidth, 6.5 V/µs slew rate, output swing 48-85 mV from supply rails at 2.5 mA load"
},
{
"number": "7",
"name": "IAIN2",
"type": "input",
"description": "Noninverting input of differential amplifier connected to positive shunt terminal with 20 kΩ typical impedance and -1 V to VDD+1 V common-mode input range"
},
{
"number": "8",
"name": "IAIN1",
"type": "input",
"description": "Inverting input of differential amplifier connected to negative shunt terminal with 20 kΩ typical impedance and -1 V to VDD+1 V common-mode input range"
},
{
"number": "9",
"name": "GND",
"type": "power_in",
"description": "Ground connection; connect both GND pins to local ground plane for low impedance"
},
{
"number": "10",
"name": "GND",
"type": "power_in",
"description": "Ground connection; connect both GND pins to local ground plane for low impedance"
},
{
"number": "11",
"name": "ICOMP2",
"type": "output",
"description": "Compensation coil H-bridge driver output with peak current 210 mA at 5 V or 125 mA at 3.3 V and common-mode output at VDD/2"
},
{
"number": "12",
"name": "ICOMP1",
"type": "output",
"description": "Compensation coil H-bridge driver output with peak current 210 mA at 5 V or 125 mA at 3.3 V and common-mode output at VDD/2; add external Schottky diodes for high-current protection"
},
{
"number": "13",
"name": "VDD",
"type": "power_in",
"description": "Power supply voltage input with operating range 2.7 V to 5.5 V, quiescent current 6 mA at 25°C, power-on reset threshold 2.4 V"
},
{
"number": "14",
"name": "GSEL2",
"type": "input",
"description": "Digital CMOS input for Hall amplifier gain and compensation frequency selection; use with GSEL1 to select Gain_1/2/3 modes or external op-amp mode"
},
{
"number": "15",
"name": "GSEL1",
"type": "input",
"description": "Digital CMOS input for Hall amplifier gain and compensation frequency selection; use with GSEL2 to select Gain_1/2/3 modes or external op-amp mode"
},
{
"number": "16",
"name": "ERROR",
"type": "tri_state",
"description": "Open-drain output indicating error conditions including power-on reset, brownout >25 µs, Hall sensor offset >50 mV, or open Hall connection; requires external pull-up"
},
{
"number": "17",
"name": "HALL4",
"type": "input",
"description": "Connection to pin 4 of symmetrical InSb Hall element (AKM HW322/HW302) for Hall signal output; current limited to 10 mA maximum"
},
{
"number": "18",
"name": "HALL3",
"type": "output",
"description": "Connection to pin 3 of symmetrical InSb Hall element (AKM HW322/HW302) for excitation return; provides regulated 0.6-0.95 V across HALL1-HALL3 dependent on GSEL mode"
},
{
"number": "19",
"name": "HALL2",
"type": "input",
"description": "Connection to pin 2 of symmetrical InSb Hall element (AKM HW322/HW302) for Hall signal output with dynamic offset and 1/f noise cancellation via current spinning; current limited 10 mA"
},
{
"number": "20",
"name": "HALL1",
"type": "output",
"description": "Connection to pin 1 of symmetrical InSb Hall element (AKM HW322/HW302) for excitation drive; provides regulated 0.6-0.95 V across HALL1-HALL3 dependent on GSEL mode"
},
{
"number": "21",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.2",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.2",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"exposed pad 21 added from the footprint"
],
"pages_sent": 36,
"cost_usd": 0.426,
"at": "2026-09-24T10:25:26"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/drv411",
"pages": 36,
"sha256": "2ed3a527ecc9890c",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 21,
"described": 21,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "drv411airgpr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4,
4,
0.77
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "c9476a1612023de37f27b4972110ab6ac6dc0eaf5ac48957a2e1c497650082a5",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "drv411airgpr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4,
4,
0.77
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "5557f77c6e842c1691d01f7d885b5323ed97a5fc0186870bf71b3c552e14982f",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "Texas Instruments",
"Package": "QFN-20(4x4)",
"Category": "Data Acquisition",
"Pins": "21"
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"drv411airgpr"
],
"discovery_pitch": "DRV411AIRGPR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"drv411airgpr.kicad_sym",
"drv411airgpr.kicad_mod",
"drv411airgpr.glb",
"drv411airgpr.step",
"drv411airgpr.lbr",
"docs/hero.png",
"docs/drv411airgpr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"visibility": {
"public": true
}
}