← Commit history
drv411airgpr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+91−11
package.json+49−9@@ -71,31 +71,31 @@ "number": "4", "name": "REFOUT", "type": "output",- "description": "Output terminal for selected buffered reference voltage (2.5V, 1.65V, or VDD/2) with load regulation 0.15-0.35 mV/mA and \u00b15 mA sink/source capability"+ "description": "Output terminal for selected buffered reference voltage (2.5V, 1.65V, or VDD/2) with load regulation 0.15-0.35 mV/mA and ±5 mA sink/source capability" }, { "number": "5", "name": "REFIN", "type": "input",- "description": "Input for zero reference to differential amplifier with 50 k\u03a9 input impedance; normally connect to REFOUT or external reference with optional 4\u00d7RSHUNT dummy shunt for CMR"+ "description": "Input for zero reference to differential amplifier with 50 kΩ input impedance; normally connect to REFOUT or external reference with optional 4×RSHUNT dummy shunt for CMR" }, { "number": "6", "name": "VOUT", "type": "output",- "description": "Output of differential amplifier with 4 V/V gain, 2 MHz bandwidth, 6.5 V/\u00b5s slew rate, output swing 48-85 mV from supply rails at 2.5 mA load"+ "description": "Output of differential amplifier with 4 V/V gain, 2 MHz bandwidth, 6.5 V/µs slew rate, output swing 48-85 mV from supply rails at 2.5 mA load" }, { "number": "7", "name": "IAIN2", "type": "input",- "description": "Noninverting input of differential amplifier connected to positive shunt terminal with 20 k\u03a9 typical impedance and -1 V to VDD+1 V common-mode input range"+ "description": "Noninverting input of differential amplifier connected to positive shunt terminal with 20 kΩ typical impedance and -1 V to VDD+1 V common-mode input range" }, { "number": "8", "name": "IAIN1", "type": "input",- "description": "Inverting input of differential amplifier connected to negative shunt terminal with 20 k\u03a9 typical impedance and -1 V to VDD+1 V common-mode input range"+ "description": "Inverting input of differential amplifier connected to negative shunt terminal with 20 kΩ typical impedance and -1 V to VDD+1 V common-mode input range" }, { "number": "9",@@ -125,7 +125,7 @@ "number": "13", "name": "VDD", "type": "power_in",- "description": "Power supply voltage input with operating range 2.7 V to 5.5 V, quiescent current 6 mA at 25\u00b0C, power-on reset threshold 2.4 V"+ "description": "Power supply voltage input with operating range 2.7 V to 5.5 V, quiescent current 6 mA at 25°C, power-on reset threshold 2.4 V" }, { "number": "14",@@ -143,7 +143,7 @@ "number": "16", "name": "ERROR", "type": "tri_state",- "description": "Open-drain output indicating error conditions including power-on reset, brownout >25 \u00b5s, Hall sensor offset >50 mV, or open Hall connection; requires external pull-up"+ "description": "Open-drain output indicating error conditions including power-on reset, brownout >25 µs, Hall sensor offset >50 mV, or open Hall connection; requires external pull-up" }, { "number": "17",@@ -210,6 +210,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "drv411airgpr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.0,+ 4.0,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "c9476a1612023de37f27b4972110ab6ac6dc0eaf5ac48957a2e1c497650082a5",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "drv411airgpr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.0,+ 4.0,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "5557f77c6e842c1691d01f7d885b5323ed97a5fc0186870bf71b3c552e14982f",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -195,7 +195,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "drv411airgpr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.0,+ 4.0,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "c9476a1612023de37f27b4972110ab6ac6dc0eaf5ac48957a2e1c497650082a5",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "drv411airgpr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.0,+ 4.0,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "5557f77c6e842c1691d01f7d885b5323ed97a5fc0186870bf71b3c552e14982f",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -242,4 +282,4 @@ "visibility": { "public": true }-}+}