main
Ray drv411airgpr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) e9b59a7
{
  "slug": "drv411airgpr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments ADCs/DACs - Special Purpose, QFN-20(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "data acquisition",
    "drv411airgpr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "drv411airgpr.kicad_sym",
    "drv411airgpr.kicad_mod",
    "drv411airgpr.glb",
    "drv411airgpr.step",
    "drv411airgpr.lbr",
    "docs/hero.png",
    "docs/drv411airgpr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "DRV411AIRGPR",
    "manufacturer": "Texas Instruments",
    "package": "QFN-20(4x4)",
    "pin_count": 21,
    "category": "Data Acquisition",
    "subcategory": "ADCs/DACs - Special Purpose",
    "datasheet": "https://www.ti.com/cn/lit/gpn/drv411",
    "parts": {
      "symbol": "drv411airgpr.kicad_sym",
      "footprint": "drv411airgpr.kicad_mod",
      "model_3d": "drv411airgpr-etched.glb",
      "model_3d_plain": "drv411airgpr.glb",
      "model_3d_step": "drv411airgpr-etched.step",
      "model_3d_step_plain": "drv411airgpr.step",
      "lbr": "drv411airgpr.lbr"
    },
    "distributor_links": {
      "lcsc": "C543037"
    },
    "pins": [
      {
        "number": "1",
        "name": "OR",
        "type": "tri_state",
        "description": "Open-drain output indicating differential amplifier overrange condition when output signal clips; requires external pull-up resistor"
      },
      {
        "number": "2",
        "name": "REFSEL2",
        "type": "input",
        "description": "Digital CMOS input for reference voltage selection; used with REFSEL1 to select 2.5V fixed, 1.65V fixed, or 50% VDD ratiometric mode"
      },
      {
        "number": "3",
        "name": "REFSEL1",
        "type": "input",
        "description": "Digital CMOS input for reference voltage selection; used with REFSEL2 to select 2.5V fixed, 1.65V fixed, or 50% VDD ratiometric mode"
      },
      {
        "number": "4",
        "name": "REFOUT",
        "type": "output",
        "description": "Output terminal for selected buffered reference voltage (2.5V, 1.65V, or VDD/2) with load regulation 0.15-0.35 mV/mA and ±5 mA sink/source capability"
      },
      {
        "number": "5",
        "name": "REFIN",
        "type": "input",
        "description": "Input for zero reference to differential amplifier with 50 kΩ input impedance; normally connect to REFOUT or external reference with optional 4×RSHUNT dummy shunt for CMR"
      },
      {
        "number": "6",
        "name": "VOUT",
        "type": "output",
        "description": "Output of differential amplifier with 4 V/V gain, 2 MHz bandwidth, 6.5 V/µs slew rate, output swing 48-85 mV from supply rails at 2.5 mA load"
      },
      {
        "number": "7",
        "name": "IAIN2",
        "type": "input",
        "description": "Noninverting input of differential amplifier connected to positive shunt terminal with 20 kΩ typical impedance and -1 V to VDD+1 V common-mode input range"
      },
      {
        "number": "8",
        "name": "IAIN1",
        "type": "input",
        "description": "Inverting input of differential amplifier connected to negative shunt terminal with 20 kΩ typical impedance and -1 V to VDD+1 V common-mode input range"
      },
      {
        "number": "9",
        "name": "GND",
        "type": "power_in",
        "description": "Ground connection; connect both GND pins to local ground plane for low impedance"
      },
      {
        "number": "10",
        "name": "GND",
        "type": "power_in",
        "description": "Ground connection; connect both GND pins to local ground plane for low impedance"
      },
      {
        "number": "11",
        "name": "ICOMP2",
        "type": "output",
        "description": "Compensation coil H-bridge driver output with peak current 210 mA at 5 V or 125 mA at 3.3 V and common-mode output at VDD/2"
      },
      {
        "number": "12",
        "name": "ICOMP1",
        "type": "output",
        "description": "Compensation coil H-bridge driver output with peak current 210 mA at 5 V or 125 mA at 3.3 V and common-mode output at VDD/2; add external Schottky diodes for high-current protection"
      },
      {
        "number": "13",
        "name": "VDD",
        "type": "power_in",
        "description": "Power supply voltage input with operating range 2.7 V to 5.5 V, quiescent current 6 mA at 25°C, power-on reset threshold 2.4 V"
      },
      {
        "number": "14",
        "name": "GSEL2",
        "type": "input",
        "description": "Digital CMOS input for Hall amplifier gain and compensation frequency selection; use with GSEL1 to select Gain_1/2/3 modes or external op-amp mode"
      },
      {
        "number": "15",
        "name": "GSEL1",
        "type": "input",
        "description": "Digital CMOS input for Hall amplifier gain and compensation frequency selection; use with GSEL2 to select Gain_1/2/3 modes or external op-amp mode"
      },
      {
        "number": "16",
        "name": "ERROR",
        "type": "tri_state",
        "description": "Open-drain output indicating error conditions including power-on reset, brownout >25 µs, Hall sensor offset >50 mV, or open Hall connection; requires external pull-up"
      },
      {
        "number": "17",
        "name": "HALL4",
        "type": "input",
        "description": "Connection to pin 4 of symmetrical InSb Hall element (AKM HW322/HW302) for Hall signal output; current limited to 10 mA maximum"
      },
      {
        "number": "18",
        "name": "HALL3",
        "type": "output",
        "description": "Connection to pin 3 of symmetrical InSb Hall element (AKM HW322/HW302) for excitation return; provides regulated 0.6-0.95 V across HALL1-HALL3 dependent on GSEL mode"
      },
      {
        "number": "19",
        "name": "HALL2",
        "type": "input",
        "description": "Connection to pin 2 of symmetrical InSb Hall element (AKM HW322/HW302) for Hall signal output with dynamic offset and 1/f noise cancellation via current spinning; current limited 10 mA"
      },
      {
        "number": "20",
        "name": "HALL1",
        "type": "output",
        "description": "Connection to pin 1 of symmetrical InSb Hall element (AKM HW322/HW302) for excitation drive; provides regulated 0.6-0.95 V across HALL1-HALL3 dependent on GSEL mode"
      },
      {
        "number": "21",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "exposed pad 21 added from the footprint"
        ],
        "pages_sent": 36,
        "cost_usd": 0.426,
        "at": "2026-09-24T10:25:26"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/drv411",
        "pages": 36,
        "sha256": "2ed3a527ecc9890c",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 21,
        "described": 21,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "drv411airgpr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          4.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c9476a1612023de37f27b4972110ab6ac6dc0eaf5ac48957a2e1c497650082a5",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "drv411airgpr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          4.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5557f77c6e842c1691d01f7d885b5323ed97a5fc0186870bf71b3c552e14982f",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}