main
History Download
Ray Initial commit: component/dp83826erhbr 73c339e

DP83826ERHBR

Texas Instruments · Global Sourcing Parts · VQFN-32-EP(5x5)

DP83826ERHBR from Texas Instruments, in a VQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ModeSelect input Mode selection pin for enhanced mode (NC or pull high to VDDIO) or basic mode (connect to GND); internal pull-up.
2 CEXT passive External capacitor connection pin; connect 2nF capacitor to GND for PLL stabilization.
3 VDDA3V3 power_in Analog power supply input voltage 3.3V with recommended decoupling capacitors.
4 RD_M input Differential receive input (minus) for 10BASE-Te and 100BASE-TX PMD interface, auto-configurable per selected mode.
5 RD_P input Differential receive input (plus) for 10BASE-Te and 100BASE-TX PMD interface, auto-configurable per selected mode.
6 TD_M output Differential transmit output (minus) for 10BASE-Te and 100BASE-TX PMD interface, auto-configurable per selected mode.
7 TD_P output Differential transmit output (plus) for 10BASE-Te and 100BASE-TX PMD interface, auto-configurable per selected mode.
8 XO output Crystal oscillator output for reference clock; leave floating when CMOS oscillator connected to XI.
9 XI/50MHzIn input Crystal oscillator input; requires 25MHz ±50ppm crystal/oscillator in MII or RMII leader mode, or 50MHz ±50ppm CMOS oscillator in RMII follower mode.
10 RBIAS passive Bias resistor connection to GND with 6.49kΩ ±1% precision value for internal reference.
11 MDIO bidirectional Bidirectional serial management data I/O with 10kΩ internal pull-up; capable of open-drain output for management access.
12 MDC input Management data clock input synchronizing MDIO serial interface; maximum clock rate 25MHz with no minimum rate.
13 RX_D3 output Receive data bit 3 output synchronized to RX_CLK rising edge containing valid data when RX_DV asserted; half-nibble in MII mode or 2-bit in RMII mode.
14 RX_D2 output Receive data bit 2 output synchronized to RX_CLK rising edge containing valid data when RX_DV asserted; half-nibble in MII mode or 2-bit in RMII mode.
15 RX_D1 output Receive data bit 1 output synchronized to RX_CLK rising edge containing valid data when RX_DV asserted; half-nibble in MII mode or 2-bit in RMII mode.
16 RX_D0 output Receive data bit 0 output synchronized to RX_CLK rising edge containing valid data when RX_DV asserted; half-nibble in MII mode or 2-bit in RMII mode.
17 VDDIO power_in I/O power supply input voltage 3.3V or 1.8V with recommended decoupling capacitors.
18 RX_DV/CRS_DV output Receive data valid output in MII mode or combined carrier sense and RX valid (CRS_DV) in RMII mode; indicates valid data on RX_D[3:0] in MII or RX_D[1:0] in RMII.
19 RX_CLK/50MHz_RMII output MII receive clock output at 25MHz for 100Mbps or 2.5MHz for 10Mbps derived from receive data; or 50MHz in RMII leader mode (unused input in RMII follower mode).
20 RX_ER output Receive error output synchronized to RX_CLK in MII mode or reference clock in RMII mode indicating error symbols detected in received packets.
21 PWRDN/INT bidirectional Power down input (default) or interrupt output when configured via register; active-low open-drain output with 9.5kΩ internal pull-up.
22 TX_CLK output MII transmit clock output at 25MHz for 100Mbps or 2.5MHz for 10Mbps with fixed phase to input clock; unused in RMII mode.
23 TX_EN input Transmit enable input appearing on TX_CLK rising edge indicating valid transmit data on TX_D[3:0] in MII or TX_D[1:0] in RMII mode; active-high signal.
24 TX_D0 input Transmit data bit 0 input synchronized to TX_CLK rising edge in MII mode or reference clock edge in RMII mode.
25 TX_D1 input Transmit data bit 1 input synchronized to TX_CLK rising edge in MII mode or reference clock edge in RMII mode.
26 TX_D2 input Transmit data bit 2 input synchronized to TX_CLK rising edge in MII mode or reference clock edge in RMII mode.
27 TX_D3 input Transmit data bit 3 input synchronized to TX_CLK rising edge in MII mode or reference clock edge in RMII mode.
28 COL/LED2/TX_ER/GPIO output Collision detection output (default) asserted in half-duplex when both transmit and receive active, configurable as LED2, MII TX_ER, or GPIO via register.
29 CRS/LED3 output Carrier sense output asserted when transmit or receive medium active in MII mode, configurable as LED3 status output; unused in RMII mode.
30 LED0 output Link status LED output indicating link state with activity blinking when transmitter or receiver active; polarity auto-detected from external pull configuration.
31 CLKOUT/LED1 output 25MHz reference clock output from XI (default after power-on reset) or LED1 output for 100Mbps link indication; clock unaffected by reset, configurable via strap or register.
32 RST_N input Active-low reset input requiring minimum 25µs pulse to force device reset; triggers strap resampling and resets all internal registers to default; internal pull-up.
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-32-EP(5x5)
Category Global Sourcing Parts
Pins 33

CAD (KiCad official)

  • Symbol: DP83826ERHBR
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: VQFN-32-EP(5x5) (KiCad packages3D, STEP)
  • 3D model files: dp83826erhbr-etched.step / dp83826erhbr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); dp83826erhbr.step / dp83826erhbr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (115 pp, sha256 0ddec6391c36bec1, retrieved 2026-10-01, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF