main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs dp83620sqx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers dp83620sqx: symbol repaired (body fitted to the names) · Ray
dp83620sqx-etched.fit.json dp83620sqx: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
dp83620sqx-etched.glb dp83620sqx: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
dp83620sqx-etched.step dp83620sqx: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
dp83620sqx-hero.glb dp83620sqx: hero from the plain model · Ray
dp83620sqx-hero.overlay.json dp83620sqx: hero from the plain model · Ray
dp83620sqx.glb Publish 0.1.0 · Ray
dp83620sqx.kicad_mod Publish 0.1.0 · Ray
dp83620sqx.kicad_sym dp83620sqx: symbol repaired (body fitted to the names) · Ray
dp83620sqx.lbr dp83620sqx: symbol repaired (body fitted to the names) · Ray
dp83620sqx.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Initial commit: component/dp83620sqx · Ray

DP83620SQX

Texas Instruments · Ethernet Transceivers · WQFN-48-EP(7x7)

DP83620SQX from Texas Instruments, in a WQFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 TX_CLK output 25 MHz Transmit clock output in 100 Mb/s mode or 2.5 MHz in 10 Mb/s mode with integrated 50 ohm termination.
2 TX_EN input MII Transmit Enable; active high input indicates presence of valid data on TXD[3:0] with internal pull-down.
3 TXD_0 input MII Transmit Data input bit 0; accepts data synchronous to TX_CLK (2.5 MHz in 10 Mb/s mode or 25 MHz in 100 Mb/s mode).
4 TXD_1 input MII Transmit Data input bit 1; accepts data synchronous to TX_CLK (2.5 MHz in 10 Mb/s mode or 25 MHz in 100 Mb/s mode).
5 TXD_2 input MII Transmit Data input bit 2; accepts data synchronous to TX_CLK (2.5 MHz in 10 Mb/s mode or 25 MHz in 100 Mb/s mode).
6 TXD_3 input MII Transmit Data input bit 3 with internal pull-down; accepts data synchronous to TX_CLK or RMII data on TXD[1].
7 PWRDOWN/INTN input Power Down input (default) or Interrupt output with internal pull-up; assert low to enable power down mode or signal interrupt when INT_OE bit is set.
8 TCK input Test Clock input for JTAG interface with internal pull-up.
9 TDO output Test Data Output for JTAG interface.
10 TMS input Test Mode Select input for JTAG interface with internal pull-up.
11 TRST# input Active low Test Reset input for JTAG interface with internal pull-up.
12 TDI input Test Data Input for JTAG interface with internal pull-up.
13 RD- bidirectional Differential receive input (PMD Input Pair); usable as transmit output in Auto-MDIX mode or 100BASE-FX receive pair with 3.3 V bias requirement.
14 RD+ bidirectional Differential receive input (PMD Input Pair); usable as transmit output in Auto-MDIX mode or 100BASE-FX receive pair with 3.3 V bias requirement.
15 CD_VSS power_in Analog ground for Common Driver circuit.
16 TD- bidirectional Differential transmit output (PMD Output Pair) for 10BASE-T or 100BASE-TX; usable as receive input in Auto-MDIX mode or 100BASE-FX transmit pair with 3.3 V bias.
17 TD+ bidirectional Differential transmit output (PMD Output Pair) for 10BASE-T or 100BASE-TX; usable as receive input in Auto-MDIX mode or 100BASE-FX transmit pair with 3.3 V bias.
18 ANAVSS power_in Analog ground supply.
19 ANA33VDD power_out Analog VDD supply; 3.3 Volts ±0.3 V or 3.3 Volts ±10%.
20 VREF power_in Bias resistor connection point; connect 4.87 kΩ 1% resistor from VREF to GND.
21 CLK_OUT_EN input Clock Output Enable strapping pin with internal pull-down; high enables clock output on CLK_OUT at power-up.
22 PCF_EN input PHY Control Frame Enable strapping pin with internal pull-down; high allows device to respond to PHY Control Frames.
23 RESERVED unconnected Reserved pin; should not be connected to external logic or net for most implementations.
24 CLK_OUT output Configurable clock output providing 50 MHz RMII reference in Master Mode, 25 MHz Receive Clock in 100 Mb mode, or 25/50 MHz pass-through of X1 reference clock.
25 RESERVED unconnected Reserved pin; should not be connected to external logic or net for most implementations.
26 LED_ACT output Activity/Collision/Duplex LED output with internal pull-up; Mode 1 indicates activity, Mode 2/3 indicates collision detection or full-duplex status.
27 LED_SPEED/FX_SD output Speed/Fiber Signal Detect LED output with internal pull-up; ON at 100 Mb/s and OFF at 10 Mb/s, or serves as fiber signal detect input in 100BASE-FX mode.
28 LED_LINK output Link/Activity LED output with internal pull-up; indicates link status and optional transmit/receive activity based on LED mode configuration.
29 RESET_N input Active low Reset input with internal pull-up; assert low for minimum 1 µs to initialize all registers and strap options to default states.
30 MDIO bidirectional Management Data I/O; bidirectional serial management instruction/data signal requiring 1.5 kΩ pullup resistor or internal pullup via CDCTRL1 register bit 3.
31 MDC input Management Data Clock input; synchronous clock to MDIO interface with maximum 25 MHz rate and no minimum clock rate.
32 IO_VDD power_out I/O VDD supply; 3.3 Volts ±0.3 V, 3.3 Volts ±10%, or 2.5 Volts ±5%.
33 X2 output Crystal output; connects to external 25 MHz crystal resonator device or left unconnected if external CMOS oscillator is used.
34 X1 input Crystal/Oscillator input; primary 25 MHz ±50 ppm reference (or 50 MHz for RMII Slave) from external crystal resonator or CMOS-level oscillator source.
35 IO_CORE_VSS power_in Digital ground for core I/O circuits.
36 RESERVED unconnected Reserved pin; should not be connected to external logic or net for most implementations.
37 RESERVED unconnected Reserved pin; should not be connected to external logic or net for most implementations.
38 RX_CLK output 25 MHz MII Receive Clock output in 100 Mb/s mode or 2.5 MHz in 10 Mb/s mode with integrated 50 ohm termination.
39 RX_DV output MII Receive Data Valid output with internal pull-down; asserted high when valid data present on RXD[3:0] with integrated 50 ohm termination.
40 CRS/CRS_DV output MII Carrier Sense or RMII Carrier Sense/Receive Data Valid output with internal pull-up; asserts high for receive medium non-idle with 50 ohm termination.
41 RX_ER output MII Receive Error output with internal pull-up; asserted high synchronously to RX_CLK indicating invalid symbol detection with integrated 50 ohm termination.
42 COL output Collision Detect output with internal pull-up; asserts high for collision detection in half-duplex modes or heartbeat in 10 Mb half-duplex with 50 ohm termination.
43 RXD_3 output MII Receive Data output bit 3 with internal pull-down; driven synchronously to RX_CLK containing valid data when RX_DV asserted.
44 RXD_2 output MII Receive Data output bit 2 with internal pull-down; driven synchronously to RX_CLK containing valid data when RX_DV asserted.
45 RXD_1 output MII Receive Data output bit 1 with internal pull-down; driven synchronously to RX_CLK containing valid data when RX_DV asserted.
46 RXD_0 output MII Receive Data output bit 0 with internal pull-down; driven synchronously to RX_CLK containing valid data when RX_DV asserted.
47 IO_VSS power_in Digital ground.
48 IO_VDD power_out I/O VDD supply; 3.3 Volts ±0.3 V, 3.3 Volts ±10%, or 2.5 Volts ±5%.
49 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WQFN-48-EP(7x7)
Category Interface
Pins 49

CAD (KiCad official)

  • Symbol: DP83620SQX
  • Footprint: Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm
  • 3D model: WQFN-48-EP(7x7) (KiCad packages3D, STEP)
  • 3D model files: dp83620sqx-etched.step / dp83620sqx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); dp83620sqx.step / dp83620sqx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (108 pp, sha256 2fb105d27fcfbe46, retrieved 2026-10-01, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF