main
Ray Publish 0.1.1 1cac1e7
{
  "schema_version": 1,
  "type": "component",
  "slug": "dp83620sqx",
  "title": "DP83620SQX",
  "brief": "Texas Instruments Ethernet Transceivers, WQFN-48-EP(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.1",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "interface",
    "dp83620sqx",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "DP83620SQX",
    "manufacturer": "Texas Instruments",
    "package": "WQFN-48-EP(7x7)",
    "pin_count": 49,
    "category": "Interface",
    "subcategory": "Ethernet Transceivers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/dp83620",
    "parts": {
      "symbol": "dp83620sqx.kicad_sym",
      "footprint": "dp83620sqx.kicad_mod",
      "model_3d": "dp83620sqx-hero.glb",
      "model_3d_plain": "dp83620sqx.glb",
      "model_3d_step": "dp83620sqx-etched.step",
      "model_3d_step_plain": "dp83620sqx.step",
      "lbr": "dp83620sqx.lbr"
    },
    "distributor_links": {
      "lcsc": "C962074"
    },
    "distributor_check": {
      "checked_at": "2026-10-01T16:23:02Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "TX_CLK",
        "type": "output",
        "description": "25 MHz Transmit clock output in 100 Mb/s mode or 2.5 MHz in 10 Mb/s mode with integrated 50 ohm termination."
      },
      {
        "number": "2",
        "name": "TX_EN",
        "type": "input",
        "description": "MII Transmit Enable; active high input indicates presence of valid data on TXD[3:0] with internal pull-down."
      },
      {
        "number": "3",
        "name": "TXD_0",
        "type": "input",
        "description": "MII Transmit Data input bit 0; accepts data synchronous to TX_CLK (2.5 MHz in 10 Mb/s mode or 25 MHz in 100 Mb/s mode)."
      },
      {
        "number": "4",
        "name": "TXD_1",
        "type": "input",
        "description": "MII Transmit Data input bit 1; accepts data synchronous to TX_CLK (2.5 MHz in 10 Mb/s mode or 25 MHz in 100 Mb/s mode)."
      },
      {
        "number": "5",
        "name": "TXD_2",
        "type": "input",
        "description": "MII Transmit Data input bit 2; accepts data synchronous to TX_CLK (2.5 MHz in 10 Mb/s mode or 25 MHz in 100 Mb/s mode)."
      },
      {
        "number": "6",
        "name": "TXD_3",
        "type": "input",
        "description": "MII Transmit Data input bit 3 with internal pull-down; accepts data synchronous to TX_CLK or RMII data on TXD[1]."
      },
      {
        "number": "7",
        "name": "PWRDOWN/INTN",
        "type": "input",
        "description": "Power Down input (default) or Interrupt output with internal pull-up; assert low to enable power down mode or signal interrupt when INT_OE bit is set."
      },
      {
        "number": "8",
        "name": "TCK",
        "type": "input",
        "description": "Test Clock input for JTAG interface with internal pull-up."
      },
      {
        "number": "9",
        "name": "TDO",
        "type": "output",
        "description": "Test Data Output for JTAG interface."
      },
      {
        "number": "10",
        "name": "TMS",
        "type": "input",
        "description": "Test Mode Select input for JTAG interface with internal pull-up."
      },
      {
        "number": "11",
        "name": "TRST#",
        "type": "input",
        "description": "Active low Test Reset input for JTAG interface with internal pull-up."
      },
      {
        "number": "12",
        "name": "TDI",
        "type": "input",
        "description": "Test Data Input for JTAG interface with internal pull-up."
      },
      {
        "number": "13",
        "name": "RD-",
        "type": "bidirectional",
        "description": "Differential receive input (PMD Input Pair); usable as transmit output in Auto-MDIX mode or 100BASE-FX receive pair with 3.3 V bias requirement."
      },
      {
        "number": "14",
        "name": "RD+",
        "type": "bidirectional",
        "description": "Differential receive input (PMD Input Pair); usable as transmit output in Auto-MDIX mode or 100BASE-FX receive pair with 3.3 V bias requirement."
      },
      {
        "number": "15",
        "name": "CD_VSS",
        "type": "power_in",
        "description": "Analog ground for Common Driver circuit."
      },
      {
        "number": "16",
        "name": "TD-",
        "type": "bidirectional",
        "description": "Differential transmit output (PMD Output Pair) for 10BASE-T or 100BASE-TX; usable as receive input in Auto-MDIX mode or 100BASE-FX transmit pair with 3.3 V bias."
      },
      {
        "number": "17",
        "name": "TD+",
        "type": "bidirectional",
        "description": "Differential transmit output (PMD Output Pair) for 10BASE-T or 100BASE-TX; usable as receive input in Auto-MDIX mode or 100BASE-FX transmit pair with 3.3 V bias."
      },
      {
        "number": "18",
        "name": "ANAVSS",
        "type": "power_in",
        "description": "Analog ground supply."
      },
      {
        "number": "19",
        "name": "ANA33VDD",
        "type": "power_out",
        "description": "Analog VDD supply; 3.3 Volts ±0.3 V or 3.3 Volts ±10%."
      },
      {
        "number": "20",
        "name": "VREF",
        "type": "power_in",
        "description": "Bias resistor connection point; connect 4.87 kΩ 1% resistor from VREF to GND."
      },
      {
        "number": "21",
        "name": "CLK_OUT_EN",
        "type": "input",
        "description": "Clock Output Enable strapping pin with internal pull-down; high enables clock output on CLK_OUT at power-up."
      },
      {
        "number": "22",
        "name": "PCF_EN",
        "type": "input",
        "description": "PHY Control Frame Enable strapping pin with internal pull-down; high allows device to respond to PHY Control Frames."
      },
      {
        "number": "23",
        "name": "RESERVED",
        "type": "unconnected",
        "description": "Reserved pin; should not be connected to external logic or net for most implementations."
      },
      {
        "number": "24",
        "name": "CLK_OUT",
        "type": "output",
        "description": "Configurable clock output providing 50 MHz RMII reference in Master Mode, 25 MHz Receive Clock in 100 Mb mode, or 25/50 MHz pass-through of X1 reference clock."
      },
      {
        "number": "25",
        "name": "RESERVED",
        "type": "unconnected",
        "description": "Reserved pin; should not be connected to external logic or net for most implementations."
      },
      {
        "number": "26",
        "name": "LED_ACT",
        "type": "output",
        "description": "Activity/Collision/Duplex LED output with internal pull-up; Mode 1 indicates activity, Mode 2/3 indicates collision detection or full-duplex status."
      },
      {
        "number": "27",
        "name": "LED_SPEED/FX_SD",
        "type": "output",
        "description": "Speed/Fiber Signal Detect LED output with internal pull-up; ON at 100 Mb/s and OFF at 10 Mb/s, or serves as fiber signal detect input in 100BASE-FX mode."
      },
      {
        "number": "28",
        "name": "LED_LINK",
        "type": "output",
        "description": "Link/Activity LED output with internal pull-up; indicates link status and optional transmit/receive activity based on LED mode configuration."
      },
      {
        "number": "29",
        "name": "RESET_N",
        "type": "input",
        "description": "Active low Reset input with internal pull-up; assert low for minimum 1 µs to initialize all registers and strap options to default states."
      },
      {
        "number": "30",
        "name": "MDIO",
        "type": "bidirectional",
        "description": "Management Data I/O; bidirectional serial management instruction/data signal requiring 1.5 kΩ pullup resistor or internal pullup via CDCTRL1 register bit 3."
      },
      {
        "number": "31",
        "name": "MDC",
        "type": "input",
        "description": "Management Data Clock input; synchronous clock to MDIO interface with maximum 25 MHz rate and no minimum clock rate."
      },
      {
        "number": "32",
        "name": "IO_VDD",
        "type": "power_out",
        "description": "I/O VDD supply; 3.3 Volts ±0.3 V, 3.3 Volts ±10%, or 2.5 Volts ±5%."
      },
      {
        "number": "33",
        "name": "X2",
        "type": "output",
        "description": "Crystal output; connects to external 25 MHz crystal resonator device or left unconnected if external CMOS oscillator is used."
      },
      {
        "number": "34",
        "name": "X1",
        "type": "input",
        "description": "Crystal/Oscillator input; primary 25 MHz ±50 ppm reference (or 50 MHz for RMII Slave) from external crystal resonator or CMOS-level oscillator source."
      },
      {
        "number": "35",
        "name": "IO_CORE_VSS",
        "type": "power_in",
        "description": "Digital ground for core I/O circuits."
      },
      {
        "number": "36",
        "name": "RESERVED",
        "type": "unconnected",
        "description": "Reserved pin; should not be connected to external logic or net for most implementations."
      },
      {
        "number": "37",
        "name": "RESERVED",
        "type": "unconnected",
        "description": "Reserved pin; should not be connected to external logic or net for most implementations."
      },
      {
        "number": "38",
        "name": "RX_CLK",
        "type": "output",
        "description": "25 MHz MII Receive Clock output in 100 Mb/s mode or 2.5 MHz in 10 Mb/s mode with integrated 50 ohm termination."
      },
      {
        "number": "39",
        "name": "RX_DV",
        "type": "output",
        "description": "MII Receive Data Valid output with internal pull-down; asserted high when valid data present on RXD[3:0] with integrated 50 ohm termination."
      },
      {
        "number": "40",
        "name": "CRS/CRS_DV",
        "type": "output",
        "description": "MII Carrier Sense or RMII Carrier Sense/Receive Data Valid output with internal pull-up; asserts high for receive medium non-idle with 50 ohm termination."
      },
      {
        "number": "41",
        "name": "RX_ER",
        "type": "output",
        "description": "MII Receive Error output with internal pull-up; asserted high synchronously to RX_CLK indicating invalid symbol detection with integrated 50 ohm termination."
      },
      {
        "number": "42",
        "name": "COL",
        "type": "output",
        "description": "Collision Detect output with internal pull-up; asserts high for collision detection in half-duplex modes or heartbeat in 10 Mb half-duplex with 50 ohm termination."
      },
      {
        "number": "43",
        "name": "RXD_3",
        "type": "output",
        "description": "MII Receive Data output bit 3 with internal pull-down; driven synchronously to RX_CLK containing valid data when RX_DV asserted."
      },
      {
        "number": "44",
        "name": "RXD_2",
        "type": "output",
        "description": "MII Receive Data output bit 2 with internal pull-down; driven synchronously to RX_CLK containing valid data when RX_DV asserted."
      },
      {
        "number": "45",
        "name": "RXD_1",
        "type": "output",
        "description": "MII Receive Data output bit 1 with internal pull-down; driven synchronously to RX_CLK containing valid data when RX_DV asserted."
      },
      {
        "number": "46",
        "name": "RXD_0",
        "type": "output",
        "description": "MII Receive Data output bit 0 with internal pull-down; driven synchronously to RX_CLK containing valid data when RX_DV asserted."
      },
      {
        "number": "47",
        "name": "IO_VSS",
        "type": "power_in",
        "description": "Digital ground."
      },
      {
        "number": "48",
        "name": "IO_VDD",
        "type": "power_out",
        "description": "I/O VDD supply; 3.3 Volts ±0.3 V, 3.3 Volts ±10%, or 2.5 Volts ±5%."
      },
      {
        "number": "49",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: DAP (Die Attach Pad) is listed as 'NC or GND' in datasheet; thermal connection to GND plane recommen",
          "exposed pad 49 added from the footprint"
        ],
        "pages_sent": 29,
        "cost_usd": 0.311,
        "at": "2026-10-01T16:22:44"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/dp83620",
        "pages": 108,
        "sha256": "2fb105d27fcfbe46",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 49,
        "described": 49,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "dp83620sqx.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7,
          7,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "f2b38b0b4bf967c77e683e8d4599608b9f0503055ec535b93c4ebb5d0163e916",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "dp83620sqx-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7,
          7,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "8ad83bf4a5c3a2ff347496b8f04d6756e7cf98baf40498a5562bd552ecbed70b",
        "checked": "2026-11-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "WQFN-48-EP(7x7)",
      "Category": "Interface",
      "Pins": "49"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "dp83620sqx"
  ],
  "discovery_pitch": "DP83620SQX (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "dp83620sqx.kicad_sym",
    "dp83620sqx.kicad_mod",
    "dp83620sqx.glb",
    "dp83620sqx.step",
    "dp83620sqx.lbr",
    "docs/hero.png",
    "docs/dp83620sqx-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "dp83620sqx-etched.step",
    "dp83620sqx-hero.glb",
    "dp83620sqx-hero.overlay.json"
  ],
  "visibility": "public",
  "description": "Texas Instruments Ethernet Transceivers, WQFN-48-EP(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "org": "adom"
}