main
Ray
Publish 0.1.1
1cac1e7
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454
{
"slug": "dp83620sqx",
"version": "0.1.1",
"type": "component",
"description": "Texas Instruments Ethernet Transceivers, WQFN-48-EP(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"interface",
"dp83620sqx",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"dp83620sqx.kicad_sym",
"dp83620sqx.kicad_mod",
"dp83620sqx.glb",
"dp83620sqx.step",
"dp83620sqx.lbr",
"docs/hero.png",
"docs/dp83620sqx-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"dp83620sqx-etched.step",
"dp83620sqx-hero.glb",
"dp83620sqx-hero.overlay.json"
],
"component": {
"mpn": "DP83620SQX",
"manufacturer": "Texas Instruments",
"package": "WQFN-48-EP(7x7)",
"pin_count": 49,
"category": "Interface",
"subcategory": "Ethernet Transceivers",
"datasheet": "https://www.ti.com/cn/lit/gpn/dp83620",
"parts": {
"symbol": "dp83620sqx.kicad_sym",
"footprint": "dp83620sqx.kicad_mod",
"model_3d": "dp83620sqx-hero.glb",
"model_3d_plain": "dp83620sqx.glb",
"model_3d_step": "dp83620sqx-etched.step",
"model_3d_step_plain": "dp83620sqx.step",
"lbr": "dp83620sqx.lbr"
},
"distributor_links": {
"lcsc": "C962074"
},
"distributor_check": {
"checked_at": "2026-10-01T16:23:02Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"pins": [
{
"number": "1",
"name": "TX_CLK",
"type": "output",
"description": "25 MHz Transmit clock output in 100 Mb/s mode or 2.5 MHz in 10 Mb/s mode with integrated 50 ohm termination."
},
{
"number": "2",
"name": "TX_EN",
"type": "input",
"description": "MII Transmit Enable; active high input indicates presence of valid data on TXD[3:0] with internal pull-down."
},
{
"number": "3",
"name": "TXD_0",
"type": "input",
"description": "MII Transmit Data input bit 0; accepts data synchronous to TX_CLK (2.5 MHz in 10 Mb/s mode or 25 MHz in 100 Mb/s mode)."
},
{
"number": "4",
"name": "TXD_1",
"type": "input",
"description": "MII Transmit Data input bit 1; accepts data synchronous to TX_CLK (2.5 MHz in 10 Mb/s mode or 25 MHz in 100 Mb/s mode)."
},
{
"number": "5",
"name": "TXD_2",
"type": "input",
"description": "MII Transmit Data input bit 2; accepts data synchronous to TX_CLK (2.5 MHz in 10 Mb/s mode or 25 MHz in 100 Mb/s mode)."
},
{
"number": "6",
"name": "TXD_3",
"type": "input",
"description": "MII Transmit Data input bit 3 with internal pull-down; accepts data synchronous to TX_CLK or RMII data on TXD[1]."
},
{
"number": "7",
"name": "PWRDOWN/INTN",
"type": "input",
"description": "Power Down input (default) or Interrupt output with internal pull-up; assert low to enable power down mode or signal interrupt when INT_OE bit is set."
},
{
"number": "8",
"name": "TCK",
"type": "input",
"description": "Test Clock input for JTAG interface with internal pull-up."
},
{
"number": "9",
"name": "TDO",
"type": "output",
"description": "Test Data Output for JTAG interface."
},
{
"number": "10",
"name": "TMS",
"type": "input",
"description": "Test Mode Select input for JTAG interface with internal pull-up."
},
{
"number": "11",
"name": "TRST#",
"type": "input",
"description": "Active low Test Reset input for JTAG interface with internal pull-up."
},
{
"number": "12",
"name": "TDI",
"type": "input",
"description": "Test Data Input for JTAG interface with internal pull-up."
},
{
"number": "13",
"name": "RD-",
"type": "bidirectional",
"description": "Differential receive input (PMD Input Pair); usable as transmit output in Auto-MDIX mode or 100BASE-FX receive pair with 3.3 V bias requirement."
},
{
"number": "14",
"name": "RD+",
"type": "bidirectional",
"description": "Differential receive input (PMD Input Pair); usable as transmit output in Auto-MDIX mode or 100BASE-FX receive pair with 3.3 V bias requirement."
},
{
"number": "15",
"name": "CD_VSS",
"type": "power_in",
"description": "Analog ground for Common Driver circuit."
},
{
"number": "16",
"name": "TD-",
"type": "bidirectional",
"description": "Differential transmit output (PMD Output Pair) for 10BASE-T or 100BASE-TX; usable as receive input in Auto-MDIX mode or 100BASE-FX transmit pair with 3.3 V bias."
},
{
"number": "17",
"name": "TD+",
"type": "bidirectional",
"description": "Differential transmit output (PMD Output Pair) for 10BASE-T or 100BASE-TX; usable as receive input in Auto-MDIX mode or 100BASE-FX transmit pair with 3.3 V bias."
},
{
"number": "18",
"name": "ANAVSS",
"type": "power_in",
"description": "Analog ground supply."
},
{
"number": "19",
"name": "ANA33VDD",
"type": "power_out",
"description": "Analog VDD supply; 3.3 Volts ±0.3 V or 3.3 Volts ±10%."
},
{
"number": "20",
"name": "VREF",
"type": "power_in",
"description": "Bias resistor connection point; connect 4.87 kΩ 1% resistor from VREF to GND."
},
{
"number": "21",
"name": "CLK_OUT_EN",
"type": "input",
"description": "Clock Output Enable strapping pin with internal pull-down; high enables clock output on CLK_OUT at power-up."
},
{
"number": "22",
"name": "PCF_EN",
"type": "input",
"description": "PHY Control Frame Enable strapping pin with internal pull-down; high allows device to respond to PHY Control Frames."
},
{
"number": "23",
"name": "RESERVED",
"type": "unconnected",
"description": "Reserved pin; should not be connected to external logic or net for most implementations."
},
{
"number": "24",
"name": "CLK_OUT",
"type": "output",
"description": "Configurable clock output providing 50 MHz RMII reference in Master Mode, 25 MHz Receive Clock in 100 Mb mode, or 25/50 MHz pass-through of X1 reference clock."
},
{
"number": "25",
"name": "RESERVED",
"type": "unconnected",
"description": "Reserved pin; should not be connected to external logic or net for most implementations."
},
{
"number": "26",
"name": "LED_ACT",
"type": "output",
"description": "Activity/Collision/Duplex LED output with internal pull-up; Mode 1 indicates activity, Mode 2/3 indicates collision detection or full-duplex status."
},
{
"number": "27",
"name": "LED_SPEED/FX_SD",
"type": "output",
"description": "Speed/Fiber Signal Detect LED output with internal pull-up; ON at 100 Mb/s and OFF at 10 Mb/s, or serves as fiber signal detect input in 100BASE-FX mode."
},
{
"number": "28",
"name": "LED_LINK",
"type": "output",
"description": "Link/Activity LED output with internal pull-up; indicates link status and optional transmit/receive activity based on LED mode configuration."
},
{
"number": "29",
"name": "RESET_N",
"type": "input",
"description": "Active low Reset input with internal pull-up; assert low for minimum 1 µs to initialize all registers and strap options to default states."
},
{
"number": "30",
"name": "MDIO",
"type": "bidirectional",
"description": "Management Data I/O; bidirectional serial management instruction/data signal requiring 1.5 kΩ pullup resistor or internal pullup via CDCTRL1 register bit 3."
},
{
"number": "31",
"name": "MDC",
"type": "input",
"description": "Management Data Clock input; synchronous clock to MDIO interface with maximum 25 MHz rate and no minimum clock rate."
},
{
"number": "32",
"name": "IO_VDD",
"type": "power_out",
"description": "I/O VDD supply; 3.3 Volts ±0.3 V, 3.3 Volts ±10%, or 2.5 Volts ±5%."
},
{
"number": "33",
"name": "X2",
"type": "output",
"description": "Crystal output; connects to external 25 MHz crystal resonator device or left unconnected if external CMOS oscillator is used."
},
{
"number": "34",
"name": "X1",
"type": "input",
"description": "Crystal/Oscillator input; primary 25 MHz ±50 ppm reference (or 50 MHz for RMII Slave) from external crystal resonator or CMOS-level oscillator source."
},
{
"number": "35",
"name": "IO_CORE_VSS",
"type": "power_in",
"description": "Digital ground for core I/O circuits."
},
{
"number": "36",
"name": "RESERVED",
"type": "unconnected",
"description": "Reserved pin; should not be connected to external logic or net for most implementations."
},
{
"number": "37",
"name": "RESERVED",
"type": "unconnected",
"description": "Reserved pin; should not be connected to external logic or net for most implementations."
},
{
"number": "38",
"name": "RX_CLK",
"type": "output",
"description": "25 MHz MII Receive Clock output in 100 Mb/s mode or 2.5 MHz in 10 Mb/s mode with integrated 50 ohm termination."
},
{
"number": "39",
"name": "RX_DV",
"type": "output",
"description": "MII Receive Data Valid output with internal pull-down; asserted high when valid data present on RXD[3:0] with integrated 50 ohm termination."
},
{
"number": "40",
"name": "CRS/CRS_DV",
"type": "output",
"description": "MII Carrier Sense or RMII Carrier Sense/Receive Data Valid output with internal pull-up; asserts high for receive medium non-idle with 50 ohm termination."
},
{
"number": "41",
"name": "RX_ER",
"type": "output",
"description": "MII Receive Error output with internal pull-up; asserted high synchronously to RX_CLK indicating invalid symbol detection with integrated 50 ohm termination."
},
{
"number": "42",
"name": "COL",
"type": "output",
"description": "Collision Detect output with internal pull-up; asserts high for collision detection in half-duplex modes or heartbeat in 10 Mb half-duplex with 50 ohm termination."
},
{
"number": "43",
"name": "RXD_3",
"type": "output",
"description": "MII Receive Data output bit 3 with internal pull-down; driven synchronously to RX_CLK containing valid data when RX_DV asserted."
},
{
"number": "44",
"name": "RXD_2",
"type": "output",
"description": "MII Receive Data output bit 2 with internal pull-down; driven synchronously to RX_CLK containing valid data when RX_DV asserted."
},
{
"number": "45",
"name": "RXD_1",
"type": "output",
"description": "MII Receive Data output bit 1 with internal pull-down; driven synchronously to RX_CLK containing valid data when RX_DV asserted."
},
{
"number": "46",
"name": "RXD_0",
"type": "output",
"description": "MII Receive Data output bit 0 with internal pull-down; driven synchronously to RX_CLK containing valid data when RX_DV asserted."
},
{
"number": "47",
"name": "IO_VSS",
"type": "power_in",
"description": "Digital ground."
},
{
"number": "48",
"name": "IO_VDD",
"type": "power_out",
"description": "I/O VDD supply; 3.3 Volts ±0.3 V, 3.3 Volts ±10%, or 2.5 Volts ±5%."
},
{
"number": "49",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: DAP (Die Attach Pad) is listed as 'NC or GND' in datasheet; thermal connection to GND plane recommen",
"exposed pad 49 added from the footprint"
],
"pages_sent": 29,
"cost_usd": 0.311,
"at": "2026-10-01T16:22:44"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/dp83620",
"pages": 108,
"sha256": "2fb105d27fcfbe46",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 49,
"described": 49,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "dp83620sqx.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7.0,
7.0,
0.77
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "f2b38b0b4bf967c77e683e8d4599608b9f0503055ec535b93c4ebb5d0163e916",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "dp83620sqx-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7.0,
7.0,
0.77
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "8ad83bf4a5c3a2ff347496b8f04d6756e7cf98baf40498a5562bd552ecbed70b",
"checked": "2026-11-16",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"title": "DP83620SQX",
"brief": "Texas Instruments Ethernet Transceivers, WQFN-48-EP(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"metadata": {
"specs": {
"Manufacturer": "Texas Instruments",
"Package": "WQFN-48-EP(7x7)",
"Category": "Interface",
"Pins": "49"
}
},
"discovery_triggers": [
"dp83620sqx"
],
"discovery_pitch": "DP83620SQX (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"visibility": "public"
}