DAC7565ICPWR

{
  "schema_version": 1,
  "type": "component",
  "slug": "dac7565icpwr",
  "title": "DAC7565ICPWR",
  "brief": "Texas Instruments Digital To Analog Converters (DAC), TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "data acquisition",
    "dac7565icpwr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "DAC7565ICPWR",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-16",
    "pin_count": 16,
    "category": "Data Acquisition",
    "subcategory": "Digital To Analog Converters (DAC)",
    "datasheet": "https://www.ti.com/cn/lit/gpn/dac7565",
    "parts": {
      "symbol": "dac7565icpwr.kicad_sym",
      "footprint": "dac7565icpwr.kicad_mod",
      "model_3d": "dac7565icpwr-hero.glb",
      "model_3d_plain": "dac7565icpwr.glb",
      "model_3d_step": "dac7565icpwr-etched.step",
      "model_3d_step_plain": "dac7565icpwr.step",
      "lbr": "dac7565icpwr.lbr"
    },
    "distributor_links": {
      "lcsc": "C486033",
      "digikey": "296-DAC7565ICPWRTR-ND",
      "mouser": "595-DAC7565ICPWR"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T01:12:47Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-DAC7565ICPWRTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-DAC7565ICPWR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VOUTA",
        "type": "output",
        "description": "Analog output voltage from DAC A."
      },
      {
        "number": "2",
        "name": "VOUTB",
        "type": "output",
        "description": "Analog output voltage from DAC B."
      },
      {
        "number": "3",
        "name": "VREFH/VREFOUT",
        "type": "bidirectional",
        "description": "Positive reference input, or reference output at 2.5V when the internal reference is used; the internal reference can source up to 20mA at this pin."
      },
      {
        "number": "4",
        "name": "AVDD",
        "type": "power_in",
        "description": "Power-supply input, 2.7V to 5.5V."
      },
      {
        "number": "5",
        "name": "VREFL",
        "type": "input",
        "description": "Negative reference input; VREFL must be below VREFH, with VREFL limited to AVDD/2 maximum per the reference input range."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference point for all circuitry on the part."
      },
      {
        "number": "7",
        "name": "VOUTC",
        "type": "output",
        "description": "Analog output voltage from DAC C."
      },
      {
        "number": "8",
        "name": "VOUTD",
        "type": "output",
        "description": "Analog output voltage from DAC D."
      },
      {
        "number": "9",
        "name": "SYNC",
        "type": "input",
        "description": "Level-triggered active-low frame sync for the input data; data are sampled on subsequent falling SCLK edges, the DAC output updates after the 24th clock, and a SYNC rising edge before the 24th clock aborts the write (Schmitt-trigger input)."
      },
      {
        "number": "10",
        "name": "SCLK",
        "type": "input",
        "description": "Serial clock input with data transfer rates up to 50MHz (Schmitt-trigger input)."
      },
      {
        "number": "11",
        "name": "DIN",
        "type": "input",
        "description": "Serial data input, clocked into the 24-bit input shift register on each falling SCLK edge (Schmitt-trigger input)."
      },
      {
        "number": "12",
        "name": "IOVDD",
        "type": "power_in",
        "description": "Digital input-output power supply, 1.8V to 5.5V per the electrical characteristics."
      },
      {
        "number": "13",
        "name": "RST",
        "type": "input",
        "description": "Asynchronous active-low reset that sets all DAC channels to zero-scale (RSTSEL = 0) or mid-scale (RSTSEL = 1)."
      },
      {
        "number": "14",
        "name": "RSTSEL",
        "type": "input",
        "description": "Reset select: when low, input coding is binary; when high, input coding is two's complement."
      },
      {
        "number": "15",
        "name": "ENABLE",
        "type": "input",
        "description": "Active-low enable that connects the SPI interface to the serial port."
      },
      {
        "number": "16",
        "name": "LDAC",
        "type": "input",
        "description": "Load DACs input, rising-edge triggered, which loads all DAC registers."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin 3 is a dual-function reference input/output; the pin table text is garbled in extraction, so the; The VREFL limit AVDD/2 comes from the reference input range row, which is conditioned on AVDD - (VRE"
        ],
        "pages_sent": 9,
        "cost_usd": 0.0633,
        "at": "2026-10-08T01:12:30"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/dac7565",
        "pages": 51,
        "sha256": "676bd6014edb5cf1",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "dac7565icpwr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "6ad5e98224d02a427d9a6b929a28dbc158b9925fba5adec12db05079f1016948",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "dac7565icpwr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "839169c7e093bd3f25c4729ed3d122de88e5ccba12853308f131d03eec35e84c",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "TSSOP-16",
      "Category": "Data Acquisition",
      "Pins": "16"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "dac7565icpwr"
  ],
  "discovery_pitch": "DAC7565ICPWR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "dac7565icpwr.kicad_sym",
    "dac7565icpwr.kicad_mod",
    "dac7565icpwr.glb",
    "dac7565icpwr.step",
    "dac7565icpwr.lbr",
    "docs/hero.png",
    "docs/dac7565icpwr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "dac7565icpwr-hero.glb",
    "dac7565icpwr-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}