component
DAC7565ICPWR
Public Made by Adomby adom
Texas Instruments Digital To Analog Converters (DAC), TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownDAC7565ICPWR
Texas Instruments · Digital To Analog Converters (DAC) · TSSOP-16
DAC7565ICPWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUTA | output | Analog output voltage from DAC A. |
| 2 | VOUTB | output | Analog output voltage from DAC B. |
| 3 | VREFH/VREFOUT | bidirectional | Positive reference input, or reference output at 2.5V when the internal reference is used; the internal reference can source up to 20mA at this pin. |
| 4 | AVDD | power_in | Power-supply input, 2.7V to 5.5V. |
| 5 | VREFL | input | Negative reference input; VREFL must be below VREFH, with VREFL limited to AVDD/2 maximum per the reference input range. |
| 6 | GND | power_in | Ground reference point for all circuitry on the part. |
| 7 | VOUTC | output | Analog output voltage from DAC C. |
| 8 | VOUTD | output | Analog output voltage from DAC D. |
| 9 | SYNC | input | Level-triggered active-low frame sync for the input data; data are sampled on subsequent falling SCLK edges, the DAC output updates after the 24th clock, and a SYNC rising edge before the 24th clock aborts the write (Schmitt-trigger input). |
| 10 | SCLK | input | Serial clock input with data transfer rates up to 50MHz (Schmitt-trigger input). |
| 11 | DIN | input | Serial data input, clocked into the 24-bit input shift register on each falling SCLK edge (Schmitt-trigger input). |
| 12 | IOVDD | power_in | Digital input-output power supply, 1.8V to 5.5V per the electrical characteristics. |
| 13 | RST | input | Asynchronous active-low reset that sets all DAC channels to zero-scale (RSTSEL = 0) or mid-scale (RSTSEL = 1). |
| 14 | RSTSEL | input | Reset select: when low, input coding is binary; when high, input coding is two's complement. |
| 15 | ENABLE | input | Active-low enable that connects the SPI interface to the serial port. |
| 16 | LDAC | input | Load DACs input, rising-edge triggered, which loads all DAC registers. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Data Acquisition |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
DAC7565ICPWR - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
dac7565icpwr-etched.step/dac7565icpwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);dac7565icpwr.step/dac7565icpwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (51 pp, sha256
676bd6014edb5cf1, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).