main
Ray
Publish 0.1.0
439df84
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297
{
"slug": "cypd3177-24lqxqt",
"version": "0.1.0",
"type": "component",
"description": "INFINEON TECHNOLOGIES Power Management - Specialized, QFN-24(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power management (pmic)",
"cypd3177-24lqxqt",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"cypd3177-24lqxqt.kicad_sym",
"cypd3177-24lqxqt.kicad_mod",
"cypd3177-24lqxqt.glb",
"cypd3177-24lqxqt.step",
"cypd3177-24lqxqt.lbr",
"docs/hero.png",
"docs/cypd3177-24lqxqt-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"cypd3177-24lqxqt-hero.glb",
"cypd3177-24lqxqt-hero.overlay.json"
],
"component": {
"mpn": "CYPD3177-24LQXQT",
"manufacturer": "INFINEON TECHNOLOGIES",
"package": "QFN-24(4x4)",
"pin_count": 25,
"category": "Power Management (PMIC)",
"subcategory": "Power Management - Specialized",
"datasheet": "https://www.infineon.com/dgdl/Infineon-EZ-PD_BCR_Datasheet_USB_Type-C_Port_Controller_for_Power_Sinks-DataSheet-v03_00-EN.pdf?fileId=8ac78c8c7d0d8da4017d0ee7ce9d70ad",
"parts": {
"symbol": "cypd3177-24lqxqt.kicad_sym",
"footprint": "cypd3177-24lqxqt.kicad_mod",
"model_3d": "cypd3177-24lqxqt-hero.glb",
"model_3d_plain": "cypd3177-24lqxqt.glb",
"model_3d_step": "cypd3177-24lqxqt-etched.step",
"model_3d_step_plain": "cypd3177-24lqxqt.step",
"lbr": "cypd3177-24lqxqt.lbr"
},
"distributor_links": {
"lcsc": "C5904158",
"digikey": "448-CYPD3177-24LQXQTCT-ND",
"mouser": "727-CYPD3177-24LQXQT"
},
"distributor_check": {
"checked_at": "2026-11-17T01:11:29Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "448-CYPD3177-24LQXQTCT-ND",
"status": "found"
},
"mouser": {
"pn": "727-CYPD3177-24LQXQT",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "VBUS_MIN",
"type": "input",
"description": "Connect a resistor divider to 3.3 V (from the VDDD pin) to indicate the minimum voltage the system needs from the attached power adapter; see Table 2 for resistor values."
},
{
"number": "2",
"name": "VBUS_MAX",
"type": "input",
"description": "Connect a resistor divider to 3.3 V (from the VDDD pin) to indicate the maximum voltage the system needs from the attached power adapter; see Table 2 for resistor values."
},
{
"number": "3",
"name": "VBUS_FET_EN",
"type": "output",
"description": "Slew-rate-controlled PMOS FET gate driver output, connected to the FET gate through a series resistor and enabled when a power contract is successfully negotiated within the requested range."
},
{
"number": "4",
"name": "SAFE_PWR_EN",
"type": "output",
"description": "PMOS FET gate driver output, connected to the FET gate through a series resistor and enabled when the device fails to negotiate higher power and defaults to 5 V."
},
{
"number": "5",
"name": "ISNK_COARSE",
"type": "input",
"description": "Connect a resistor divider to 3.3 V (from the VDDD pin) to set the operating current requested from the power adapter; see Tables 3 and 4 for resistor values."
},
{
"number": "6",
"name": "ISNK_FINE",
"type": "input",
"description": "Connect a resistor divider to 3.3 V (from the VDDD pin) to set the operating current requested from the power adapter; see Tables 3 and 4 for resistor values."
},
{
"number": "7",
"name": "HPI_INT",
"type": "output",
"description": "Active LOW HPI interrupt pin."
},
{
"number": "8",
"name": "GPIO_1",
"type": "bidirectional",
"description": "Additional GPIO that can be set up over the HPI interface."
},
{
"number": "9",
"name": "FAULT",
"type": "output",
"description": "Pulled high by the device if the power adapter cannot supply the required voltage or current or if an OVP event is detected, and low otherwise."
},
{
"number": "10",
"name": "FLIP",
"type": "bidirectional",
"description": "Open-drain I/O that needs an external pull-up; it is low when no device is attached or CC1 is connected and high when CC2 is connected, and a pull-up of 4.7 kΩ or less (or none) sets the UFP VDO data capability bit to 1, while 50 kΩ sets it to 0."
},
{
"number": "11",
"name": "VDC_OUT",
"type": "input",
"description": "Connect to the output of the PFETs controlled by VBUS_FET_EN to monitor the VBUS output, which is the power output of the system."
},
{
"number": "12",
"name": "HPI_SDA",
"type": "bidirectional",
"description": "I2C slave data line that lets a host processor control and monitor the device (slave address 0x08, up to 1 Mbps)."
},
{
"number": "13",
"name": "HPI_SCL",
"type": "bidirectional",
"description": "I2C slave clock line that lets a host processor control and monitor the device (slave address 0x08, up to 1 Mbps)."
},
{
"number": "14",
"name": "CC2",
"type": "bidirectional",
"description": "Communication Channel 2 pin used to negotiate a voltage/current with the attached adapter, protected against VBUS shorts (17 V continuous)."
},
{
"number": "15",
"name": "CC1",
"type": "bidirectional",
"description": "Communication Channel 1 pin used to negotiate a voltage/current with the attached adapter, protected against VBUS shorts (17 V continuous)."
},
{
"number": "16",
"name": "D-",
"type": "unconnected",
"description": "Leave this pin unconnected."
},
{
"number": "17",
"name": "D+",
"type": "unconnected",
"description": "Leave this pin unconnected."
},
{
"number": "18",
"name": "VBUS_IN",
"type": "power_in",
"description": "Connect to VBUS of the USB Type-C connector; supplies the device (3.0 V to 24.5 V) and monitors incoming voltage."
},
{
"number": "19",
"name": "GND",
"type": "power_in",
"description": "System ground pin."
},
{
"number": "20",
"name": "DNU1",
"type": "unconnected",
"description": "Do not use; leave this pin unconnected."
},
{
"number": "21",
"name": "DNU2",
"type": "unconnected",
"description": "Do not use; leave this pin unconnected."
},
{
"number": "22",
"name": "VSS",
"type": "power_in",
"description": "Ground pin, connect to USB Type-C connector GND."
},
{
"number": "23",
"name": "VDDD",
"type": "power_out",
"description": "Output of the internal 3.3-V regulator; connect 1 µF and 2x 100-nF capacitors."
},
{
"number": "24",
"name": "VCCD",
"type": "power_out",
"description": "Output of the internal 1.8-V regulator; connect a 1-µF decoupling capacitor."
},
{
"number": "25",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-sonnet-5-5",
"primary_mode": "text",
"consensus_model": "claude-opus-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Figure 2 (top view) labels pin 22 as GND, while Table 1 names it VSS; both are ground, but the name ; The datasheet text does not state the 4x4 mm body size, so the package is given as '24-Pin QFN' (the; Pin types for HPI_SCL, FLIP, VDC_OUT, VDDD and the analog setting pins are inferred from the descrip",
"exposed pad 25 added from the footprint",
"dropped thermal pad ['EP'] absent from footprint"
],
"pages_sent": 12,
"cost_usd": 0.2281,
"at": "2026-11-17T01:11:15"
},
"datasheet": {
"url": "https://www.infineon.com/dgdl/Infineon-EZ-PD_BCR_Datasheet_USB_Type-C_Port_Controller_for_Power_Sinks-DataSheet-v03_00-EN.pdf?fileId=8ac78c8c7d0d8da4017d0ee7ce9d70ad",
"pages": 24,
"sha256": "56daea80a843fc73",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 25,
"described": 25,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "cypd3177-24lqxqt.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.0,
4.0,
0.77
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "096fc110543e6d324c5120c2d38e3dca87a389da9b6fac234f1fe40856295ef4",
"checked": "2026-11-17",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "cypd3177-24lqxqt-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.0,
4.0,
0.77
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "b90c46789a7652dc5693a849930232c92d436b4cb5b847956ac9a881f6d9a1a8",
"checked": "2026-11-17",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}