main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers cypd3177-24lqxqt: viewers · Ray
cypd3177-24lqxqt-etched.glb cypd3177-24lqxqt: factory component page (tier=mfr) · Ray
cypd3177-24lqxqt-etched.step cypd3177-24lqxqt: factory component page (tier=mfr) · Ray
cypd3177-24lqxqt-hero.glb cypd3177-24lqxqt: hero GLB from the etched model (keeps the MPN mark) · Ray
cypd3177-24lqxqt-hero.overlay.json cypd3177-24lqxqt: hero GLB from the etched model (keeps the MPN mark) · Ray
cypd3177-24lqxqt.glb Publish 0.1.0 · Ray
cypd3177-24lqxqt.kicad_mod Publish 0.1.0 · Ray
cypd3177-24lqxqt.kicad_sym Publish 0.1.0 · Ray
cypd3177-24lqxqt.lbr Publish 0.1.0 · Ray
cypd3177-24lqxqt.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 25 pins · Ray

CYPD3177-24LQXQT

INFINEON TECHNOLOGIES · Power Management - Specialized · QFN-24(4x4)

CYPD3177-24LQXQT from INFINEON TECHNOLOGIES, in a QFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VBUS_MIN input Connect a resistor divider to 3.3 V (from the VDDD pin) to indicate the minimum voltage the system needs from the attached power adapter; see Table 2 for resistor values.
2 VBUS_MAX input Connect a resistor divider to 3.3 V (from the VDDD pin) to indicate the maximum voltage the system needs from the attached power adapter; see Table 2 for resistor values.
3 VBUS_FET_EN output Slew-rate-controlled PMOS FET gate driver output, connected to the FET gate through a series resistor and enabled when a power contract is successfully negotiated within the requested range.
4 SAFE_PWR_EN output PMOS FET gate driver output, connected to the FET gate through a series resistor and enabled when the device fails to negotiate higher power and defaults to 5 V.
5 ISNK_COARSE input Connect a resistor divider to 3.3 V (from the VDDD pin) to set the operating current requested from the power adapter; see Tables 3 and 4 for resistor values.
6 ISNK_FINE input Connect a resistor divider to 3.3 V (from the VDDD pin) to set the operating current requested from the power adapter; see Tables 3 and 4 for resistor values.
7 HPI_INT output Active LOW HPI interrupt pin.
8 GPIO_1 bidirectional Additional GPIO that can be set up over the HPI interface.
9 FAULT output Pulled high by the device if the power adapter cannot supply the required voltage or current or if an OVP event is detected, and low otherwise.
10 FLIP bidirectional Open-drain I/O that needs an external pull-up; it is low when no device is attached or CC1 is connected and high when CC2 is connected, and a pull-up of 4.7 kΩ or less (or none) sets the UFP VDO data capability bit to 1, while 50 kΩ sets it to 0.
11 VDC_OUT input Connect to the output of the PFETs controlled by VBUS_FET_EN to monitor the VBUS output, which is the power output of the system.
12 HPI_SDA bidirectional I2C slave data line that lets a host processor control and monitor the device (slave address 0x08, up to 1 Mbps).
13 HPI_SCL bidirectional I2C slave clock line that lets a host processor control and monitor the device (slave address 0x08, up to 1 Mbps).
14 CC2 bidirectional Communication Channel 2 pin used to negotiate a voltage/current with the attached adapter, protected against VBUS shorts (17 V continuous).
15 CC1 bidirectional Communication Channel 1 pin used to negotiate a voltage/current with the attached adapter, protected against VBUS shorts (17 V continuous).
16 D- unconnected Leave this pin unconnected.
17 D+ unconnected Leave this pin unconnected.
18 VBUS_IN power_in Connect to VBUS of the USB Type-C connector; supplies the device (3.0 V to 24.5 V) and monitors incoming voltage.
19 GND power_in System ground pin.
20 DNU1 unconnected Do not use; leave this pin unconnected.
21 DNU2 unconnected Do not use; leave this pin unconnected.
22 VSS power_in Ground pin, connect to USB Type-C connector GND.
23 VDDD power_out Output of the internal 3.3-V regulator; connect 1 µF and 2x 100-nF capacitors.
24 VCCD power_out Output of the internal 1.8-V regulator; connect a 1-µF decoupling capacitor.
25 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer INFINEON TECHNOLOGIES
Package QFN-24(4x4)
Category Power Management (PMIC)
Pins 25

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Max supply voltage on VBUS_IN and VDC_OUT pins VBUS_MAX 30 V Absolute max 11
Max supply voltage relative to VSS VDDD_MAX 6 V 11
Max voltage on CC1, CC2 pins VCC_PIN_ABS 22 V As per USB PD specification, maximum allowed VBUS = 21.5 V 11
GPIO voltage VGPIO_ABS -0.5 V Max VDDD + 0.5 V 11
Maximum current per GPIO IGPIO_ABS -25 25 mA 11
GPIO injection current IGPIO_injection -0.5 0.5 mA Absolute max, current injected per pin 11
OVT GPIO voltage VGPIO_OVT_ABS -0.5 6 V Applicable to pins HPI_INT and GPIO_1 11
ESD human body model ESD_HBM 2200 V 11
ESD charged device model ESD_CDM 500 V 11
Pin current for latch-up LU -100 100 mA 11
ESD IEC61000-4-2 contact ESD_IEC_CON 8000 V Contact discharge on CC1, CC2, VBUS_IN, HPI_SDA and HPI_SCL pins 11
ESD IEC61000-4-2 air ESD_IEC_AIR 15000 V Air discharge for D+, D-, CC1, CC2, VBUS_IN, HPI_SDA and HPI_SCL pins 11
Power supply input voltage (sink mode) VDDD 2.7 5.5 V Sink mode, -40°C ≤ TA ≤ 105°C 11
Power supply input voltage (source mode) VDDD 3 5.5 V Source mode, -40°C ≤ TA ≤ 105°C 11
Power supply input voltage VBUS_IN 3 24.5 V -40 °C ≤ TA ≤ 105°C 11
Power supply decoupling capacitor for VDDD Cexc 0.8 1 µF X5R ceramic or better 11
Power supply decoupling capacitor for VBUS_IN_DISCHARGE Cexv 0.1 µF X5R ceramic or better 11
Operating ambient temperature TA -40 25 105 °C Extended Industrial 20
Operating junction temperature TJ -40 25 120 °C Extended Industrial 20
Package thermal resistance junction-to-ambient θJA 19.98 °C/W 24-QFN 20
Package thermal resistance junction-to-case θJC 4.78 °C/W 24-QFN 20
Wakeup from Deep Sleep mode TDEEPSLEEP 35 µs 12
Power-up to ready to accept I2C/CC command T_PWR_RDY 5 25 ms 12
Input voltage HIGH threshold VIH_CMOS 0.7 V CMOS input; min is 0.7 × VDDD 12
Input voltage LOW threshold VIL_CMOS 0.3 V CMOS input; max is 0.3 × VDDD 12
Output voltage HIGH level VOH_3V -0.6 V IOH = 4 mA at 3-V VDDD; min is VDDD -0.6 12
Output voltage LOW level VOL_3V 0.6 V IOL = 10 mA at 3-V VDDD 12
Input leakage current (absolute value) IIL 2 nA +25°C TA, 3-V VDDD 12
Max pin capacitance D+, D- CPIN_A 22 pF Capacitance on D+, D- pins. Guaranteed by characterization. 12
Max pin capacitance, other I/Os CPIN 3 7 pF -40°C to +85°C TA, All VDDD, all other I/OS. Guaranteed by characterization. 12
Input hysteresis CMOS VHYSCMOS 0.05 mV VDDD < 4.5 V. Guaranteed by characterization. Min is 0.05 × VDDD 12
ADC integral non-linearity INL -2.5 2.5 LSB Reference voltage generated from VDDD 18
ADC integral non-linearity INL -1.5 1.5 LSB Reference voltage generated from bandgap 18
ADC differential non-linearity DNL -2.5 2.5 LSB Reference voltage generated from VDDD 18
ADC differential non-linearity DNL -1.5 1.5 LSB Reference voltage generated from bandgap 18
ADC gain error Gain Error -1.5 1.5 LSB 18
ADC reference voltage from band gap VREF_ADC2 1.96 2 2.04 V Reference voltage generated from bandgap 18
ADC slew rate of sampled voltage signal SLEW_Max 3 V/ms 18
Core logic output voltage VCCD 1.8 V 11
Active mode supply current from VBUS or VDDD IDD_A 10 mA VDDD = 5 V OR VBUS = 5 V, TA = 25°C. CC1/CC2 in Tx or Rx, no I/O sourcing current, 2 SCBs at 1 Mbps, EA/ADC/CSA/UVOV ON, CPU at 24 MHz. 12
Sleep mode supply current IDD_S 3 mA VDDD = 3.3 V, TA = 25°C, All blocks except CPU are on, CC IO on, EA/ADC/CSA/UVOV On. 12
Deep sleep supply current (sink) IDD_PB_DS_A_SNK 500 µA For sink applications, VBUS = 24.5 V, TA = 25 °C, Part is in deep sleep. Attached, CC I/O on, ADC/CSA/UVOV on. 12
Wakeup from sleep mode TSLEEP 0 µs 12
Power-on I/O Initialization Time TPOR_HIZ_T 3 ms 12
ADC resolution Resolution 8 Bits 18

CAD (KiCad official)

  • Symbol: CYPD3177-24LQXQT
  • Footprint: Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm
  • 3D model: QFN-24(4x4) (KiCad packages3D, STEP)
  • 3D model files: cypd3177-24lqxqt-etched.step / cypd3177-24lqxqt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); cypd3177-24lqxqt.step / cypd3177-24lqxqt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: INFINEON TECHNOLOGIES datasheet (24 pp, sha256 56daea80a843fc73, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF