AS393MMTR-G1

{
  "slug": "as393mmtr-g1",
  "version": "0.1.1",
  "type": "component",
  "description": "Diodes Incorporated Comparators, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "operational amplifier-comparator",
    "as393mmtr-g1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "as393mmtr-g1.kicad_sym",
    "as393mmtr-g1.kicad_mod",
    "as393mmtr-g1.glb",
    "as393mmtr-g1.step",
    "as393mmtr-g1.lbr",
    "docs/hero.png",
    "docs/as393mmtr-g1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "as393mmtr-g1-hero.glb",
    "as393mmtr-g1-hero.overlay.json",
    "as393mmtr-g1-etched.glb"
  ],
  "component": {
    "mpn": "AS393MMTR-G1",
    "manufacturer": "Diodes Incorporated",
    "package": "MSOP-8",
    "pin_count": 8,
    "category": "Operational Amplifier/Comparator",
    "subcategory": "Comparators",
    "datasheet": "https://www.diodes.com/assets/Datasheets/AS393MMTR-G1.pdf",
    "parts": {
      "symbol": "as393mmtr-g1.kicad_sym",
      "footprint": "as393mmtr-g1.kicad_mod",
      "model_3d": "as393mmtr-g1-hero.glb",
      "model_3d_plain": "as393mmtr-g1-etched.glb",
      "model_3d_step": "as393mmtr-g1-etched.step",
      "model_3d_step_plain": "as393mmtr-g1.step",
      "lbr": "as393mmtr-g1.lbr"
    },
    "distributor_links": {
      "lcsc": "C3658480",
      "digikey": "AS393MMTR-G1DITR-ND",
      "mouser": "621-AS393MMTR-G1"
    },
    "distributor_check": {
      "checked_at": "2026-11-11T00:21:36Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "AS393MMTR-G1DITR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "621-AS393MMTR-G1",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "OUTPUT1",
        "type": "output",
        "description": "Open-collector output of comparator 1; the datasheet gives a saturation voltage of 200 mV typical at 4 mA sink and a sink current of 6.0 mA minimum."
      },
      {
        "number": "2",
        "name": "INPUT1-",
        "type": "input",
        "description": "Inverting input of comparator 1; the common-mode range is 0 V to VCC-1.5 V and the input can be driven up to +36 V without damage, but should not go below -0.3 V."
      },
      {
        "number": "3",
        "name": "INPUT1+",
        "type": "input",
        "description": "Non-inverting input of comparator 1; the common-mode range is 0 V to VCC-1.5 V and the input can be driven up to +36 V without damage, but should not go below -0.3 V."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference (0 V) for the device; the datasheet specifies GND = 0 V for the electrical characteristics."
      },
      {
        "number": "5",
        "name": "INPUT2+",
        "type": "input",
        "description": "Non-inverting input of comparator 2; the common-mode range is 0 V to VCC-1.5 V and the input can be driven up to +36 V without damage, but should not go below -0.3 V."
      },
      {
        "number": "6",
        "name": "INPUT2-",
        "type": "input",
        "description": "Inverting input of comparator 2; the common-mode range is 0 V to VCC-1.5 V and the input can be driven up to +36 V without damage, but should not go below -0.3 V."
      },
      {
        "number": "7",
        "name": "OUTPUT2",
        "type": "output",
        "description": "Open-collector output of comparator 2; the datasheet gives a saturation voltage of 200 mV typical at 4 mA sink and a sink current of 6.0 mA minimum."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply: 2 V to 36 V single supply (absolute maximum 40 V), or ±1.0 V to ±18 V dual supplies."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The MSOP-8 pin-to-name mapping is not stated unambiguously in the extracted text. The pin numbers (1; The page 1 pin assignment figure is shared by the SO-8, TSSOP-8 and MSOP-8 packages, so the same pin"
        ],
        "pages_sent": 14,
        "cost_usd": 0.0576,
        "at": "2026-11-11T00:21:21"
      },
      "datasheet": {
        "url": "https://www.diodes.com/assets/Datasheets/AS393MMTR-G1.pdf",
        "pages": 14,
        "sha256": "4612b4ecc06e13cb",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "as393mmtr-g1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "847c4c5023fe1603fbd36900a5dcc4bd3901ba473f71d42c9a469f0236eaadf3",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "as393mmtr-g1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c745ec948b198daf3edf42b733d3f7bb2e321a91ad96e6479dea7930b8344468",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "MSOP-8",
      "source_page": 10,
      "D": {
        "nom_mm": 3.0,
        "range_mm": [
          2.9,
          3.1
        ]
      },
      "E1": {
        "nom_mm": 3.0,
        "range_mm": [
          2.9,
          3.1
        ]
      },
      "E": {
        "nom_mm": 4.9,
        "range_mm": [
          4.7,
          5.1
        ]
      },
      "e": {
        "nom_mm": 0.65,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.0,
        "range_mm": [
          0.8,
          1.2
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "as393mmtr-g1.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}