component

AS393MMTR-G1

Public Made by Adom

by adom

Diodes Incorporated Comparators, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentoperational amplifier-comparatoras393mmtr-g1factory-2.0.0extractor-text

Verified AS393MMTR-G1

by Ray · last 11 Nov 2026 · 2 records · files match
SymbolFootprint3D modelPins

Verification log 2 records

11 Nov 2026RayRebuilt by the parts factory: tier mfr, 8 pinsfiles match
SymbolFootprint3D modelPinsfor all variants
  • ✓component-page-verify: PASS
  • ✓cad_props: Datasheet, MPN and distributor properties match page.json
  • ✓component: AS393MMTR-G1 · MSOP-8 · 8 pins
  • ✓copper: 8 copper pads, none touching another net
  • ✓datasheet: all 8 pin names found in the 14-page datasheet
  • ✓distributor: lcsc C3658480, digikey AS393MMTR-G1DITR-ND, mouser 621-AS393MMTR-G1
  • ✓family: MSOP-8_3x3mm_P0.65mm
  • ✓files: 7 declared files present
  • ✓hero: docs/hero.png 4000x2500
  • ✓lbr: OK: /tmp/cpv-fre2vowk/x.lbr is a valid EAGLE .lbr with complete deviceset
  • ✓license: CC-BY-SA-4.0
  • ✓models_3d: 2 records
  • ✓package_fit: height and body within the datasheet's package drawing (datasheet p.10)
  • ✓pads: 8 pins = 8 pads
  • ✓pose: 2 STEP(s) Z-up, seated, centred
  • ✓symbol: 8 pins agree
  • ✓symbol_text: no pin names collide
  • ✓viewers: viewers/footprint.html 22 kB, viewers/symbol.html 10 kB
  • ✓visibility: public, source open
Evidencedatasheet
Verified files✓ as393mmtr-g1.kicad_sym✓ as393mmtr-g1.kicad_mod✓ as393mmtr-g1.step
10 Nov 2026RayPublished by the parts factory: tier mfr, 8 pinsfiles match
SymbolFootprint3D modelPinsfor all variants
  • ✓component-page-verify: PASS
  • ✓cad_props: Datasheet, MPN and distributor properties match page.json
  • ✓component: AS393MMTR-G1 · MSOP-8 · 8 pins
  • ✓copper: 8 copper pads, none touching another net
  • ✓datasheet: all 8 pin names found in the 14-page datasheet
  • ✓distributor: lcsc C3658480, digikey AS393MMTR-G1DITR-ND, mouser 621-AS393MMTR-G1
  • ✓family: MSOP-8_3x3mm_P0.65mm
  • ✓files: 7 declared files present
  • ✓hero: docs/hero.png 4000x2500
  • ✓lbr: OK: /tmp/cpv-2rsfqmml/x.lbr is a valid EAGLE .lbr with complete deviceset
  • ✓license: CC-BY-SA-4.0
  • ✓models_3d: 2 records
  • ✓package_fit: height and body within the datasheet's package drawing (datasheet p.10)
  • ✓pads: 8 pins = 8 pads
  • ✓pose: 2 STEP(s) Z-up, seated, centred
  • ✓symbol: 8 pins agree
  • ✓symbol_text: no pin names collide
  • ✓viewers: viewers/footprint.html 22 kB, viewers/symbol.html 10 kB
  • ✓visibility: public, source open
Evidencedatasheet
Verified files✓ as393mmtr-g1.kicad_sym✓ as393mmtr-g1.kicad_mod✓ as393mmtr-g1.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers as393mmtr-g1: viewers · Ray
as393mmtr-g1-etched.glb Publish 0.1.0 · Ray
as393mmtr-g1-etched.step as393mmtr-g1: factory component page (tier=mfr) · Ray
as393mmtr-g1-hero.glb as393mmtr-g1: hero GLB from the etched model (keeps the MPN mark) · Ray
as393mmtr-g1-hero.overlay.json Publish 0.1.1 · Ray
as393mmtr-g1.glb Publish 0.1.0 · Ray
as393mmtr-g1.kicad_mod Publish 0.1.0 · Ray
as393mmtr-g1.kicad_sym Publish 0.1.0 · Ray
as393mmtr-g1.lbr Publish 0.1.1 · Ray
as393mmtr-g1.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.1 · Ray
verification.json Verified: Rebuilt by the parts factory: tier mfr, 8 pins · Ray

AS393MMTR-G1

Diodes Incorporated · Comparators · MSOP-8

AS393MMTR-G1 from Diodes Incorporated, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUTPUT1 output Open-collector output of comparator 1; the datasheet gives a saturation voltage of 200 mV typical at 4 mA sink and a sink current of 6.0 mA minimum.
2 INPUT1- input Inverting input of comparator 1; the common-mode range is 0 V to VCC-1.5 V and the input can be driven up to +36 V without damage, but should not go below -0.3 V.
3 INPUT1+ input Non-inverting input of comparator 1; the common-mode range is 0 V to VCC-1.5 V and the input can be driven up to +36 V without damage, but should not go below -0.3 V.
4 GND power_in Ground reference (0 V) for the device; the datasheet specifies GND = 0 V for the electrical characteristics.
5 INPUT2+ input Non-inverting input of comparator 2; the common-mode range is 0 V to VCC-1.5 V and the input can be driven up to +36 V without damage, but should not go below -0.3 V.
6 INPUT2- input Inverting input of comparator 2; the common-mode range is 0 V to VCC-1.5 V and the input can be driven up to +36 V without damage, but should not go below -0.3 V.
7 OUTPUT2 output Open-collector output of comparator 2; the datasheet gives a saturation voltage of 200 mV typical at 4 mA sink and a sink current of 6.0 mA minimum.
8 VCC power_in Positive supply: 2 V to 36 V single supply (absolute maximum 40 V), or ±1.0 V to ±18 V dual supplies.

Key specifications

Parameter Value
Manufacturer Diodes Incorporated
Package MSOP-8
Category Operational Amplifier/Comparator
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage (25°C) 1 5 mV VO = 1.4V, RS = 0Ω, VCC = 5V to 30V; TA = +25°C (standard typeface) 3
Input Offset Voltage (over temperature) 7 mV VO = 1.4V, RS = 0Ω, VCC = 5V to 30V; TA = -40°C to +85°C (bold typeface) 3
Input Bias Current (25°C) IIN+ or IIN- 25 250 nA IIN+ or IIN- with output in linear range, VCM = 0V; TA = +25°C (standard typeface) 3
Input Bias Current (over temperature) IIN+ or IIN- 400 nA IIN+ or IIN- with output in linear range, VCM = 0V; TA = -40°C to +85°C (bold typeface) 3
Input Offset Current (25°C) IIN+-IIN- 5 50 nA IIN+-IIN-, VCM = 0V; TA = +25°C (standard typeface) 3
Input Offset Current (over temperature) IIN+-IIN- 200 nA IIN+-IIN-, VCM = 0V; TA = -40°C to +85°C (bold typeface) 3
Input Common Mode Voltage Range 0 V VCC = 30V 3
Supply Current (VCC = 5V, 25°C) 0.4 1 mA RL = ∞, VCC = 5V; TA = +25°C (standard typeface) 3
Supply Current (VCC = 5V, over temperature) 2 mA RL = ∞, VCC = 5V; TA = -40°C to +85°C (bold typeface) 3
Supply Current (VCC = 30V, 25°C) 0.7 1.7 mA RL = ∞, VCC = 30V; TA = +25°C (standard typeface) 3
Supply Current (VCC = 30V, over temperature) 3 mA RL = ∞, VCC = 30V; TA = -40°C to +85°C (bold typeface) 3
Voltage Gain 50 200 V/mV VCC = 15V, RL ≥ 15kΩ, VO = 1V to 11V 3
Output Sink Current 6 16 mA VIN- = 1V, VIN+ = 0V, VO = 1.5V 3
Output Leakage Current 1 µA VIN- = 0V, VIN+ = 1V, VO = 30V 3
Saturation Voltage (25°C) 200 400 mV VIN- = 1V, VIN+ = 0, ISINK ≤ 4mA; TA = +25°C (standard typeface) 3
Saturation Voltage (over temperature) 500 mV VIN- = 1V, VIN+ = 0, ISINK ≤ 4mA; TA = -40°C to +85°C (bold typeface) 3
Supply Voltage (absolute maximum) VCC 40 V 2
Differential Input Voltage VID 40 V 2
Input Voltage VIN -0.3 40 V 2
Input Current IIN 50 mA VIN < -0.3V (Note 5) 2
Power Dissipation (MSOP-8) PD 450 mW TA = +25°C 2
Operating Junction Temperature TJ 150 °C 2
Storage Temperature TSTG -65 150 °C 2
Lead Temperature (soldering) TLEAD 260 °C Soldering, 10 seconds 2
Supply Voltage (recommended) VCC 2 36 V 2
Operating Temperature Range TA -40 85 °C 2
Thermal Resistance, Junction to Case (MSOP-8) 24 °C/W Junction to case 3
Thermal Resistance, Junction to Ambient (MSOP-8) 151 °C/W Junction to ambient 3

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin • Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 • Weight: 13

CAD (KiCad official)

  • Symbol: AS393MMTR-G1
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: as393mmtr-g1-etched.step / as393mmtr-g1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); as393mmtr-g1.step / as393mmtr-g1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Diodes Incorporated datasheet (14 pp, sha256 4612b4ecc06e13cb, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF