component
AS393MMTR-G1
Public Made by Adomby adom
Diodes Incorporated Comparators, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.1
5 files changed
+339−326
README.md+30−30@@ -8,14 +8,14 @@ AS393MMTR-G1 from Diodes Incorporated, in a MSOP-8. Pinout and pin descriptions | Pin | Name | Type | Function | |---|---|---|---|-| 1 | OUTPUT1 | output | Open-collector output of comparator 1, with a low output saturation voltage of 200mV at 4mA and a maximum saturation of 400mV. |-| 2 | INPUT1- | input | Inverting input of comparator 1; the input common-mode voltage must not go below -0.3V at +25°C and the input can withstand up to +36V. |-| 3 | INPUT1+ | input | Non-inverting input of comparator 1; the common-mode range extends from 0V to VCC-1.5V and the input can withstand up to +36V. |-| 4 | GND | power_in | Ground reference pin (0V), which is also the negative supply for split-supply operation, with the input common-mode range including ground. |-| 5 | INPUT2+ | input | Non-inverting input of comparator 2; the common-mode range extends from 0V to VCC-1.5V and the input can withstand up to +36V. |-| 6 | INPUT2- | input | Inverting input of comparator 2; the input common-mode voltage must not go below -0.3V at +25°C and the input can withstand up to +36V. |-| 7 | OUTPUT2 | output | Open-collector output of comparator 2, with a low output saturation voltage of 200mV at 4mA and a maximum saturation of 400mV. |-| 8 | VCC | power_in | Positive supply pin; single supply 2V to 36V or dual supplies ±1.0V to ±18V per the recommended operating conditions. |+| 1 | OUTPUT1 | output | Open-collector output of comparator 1; the datasheet gives a saturation voltage of 200 mV typical at 4 mA sink and a sink current of 6.0 mA minimum. |+| 2 | INPUT1- | input | Inverting input of comparator 1; the common-mode range is 0 V to VCC-1.5 V and the input can be driven up to +36 V without damage, but should not go below -0.3 V. |+| 3 | INPUT1+ | input | Non-inverting input of comparator 1; the common-mode range is 0 V to VCC-1.5 V and the input can be driven up to +36 V without damage, but should not go below -0.3 V. |+| 4 | GND | power_in | Ground reference (0 V) for the device; the datasheet specifies GND = 0 V for the electrical characteristics. |+| 5 | INPUT2+ | input | Non-inverting input of comparator 2; the common-mode range is 0 V to VCC-1.5 V and the input can be driven up to +36 V without damage, but should not go below -0.3 V. |+| 6 | INPUT2- | input | Inverting input of comparator 2; the common-mode range is 0 V to VCC-1.5 V and the input can be driven up to +36 V without damage, but should not go below -0.3 V. |+| 7 | OUTPUT2 | output | Open-collector output of comparator 2; the datasheet gives a saturation voltage of 200 mV typical at 4 mA sink and a sink current of 6.0 mA minimum. |+| 8 | VCC | power_in | Positive supply: 2 V to 36 V single supply (absolute maximum 40 V), or ±1.0 V to ±18 V dual supplies. | ## Key specifications @@ -32,34 +32,34 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Supply Voltage | VCC | | | 40 | V | | 2 |+| Input Offset Voltage (25°C) | | | 1 | 5 | mV | VO = 1.4V, RS = 0Ω, VCC = 5V to 30V; TA = +25°C (standard typeface) | 3 |+| Input Offset Voltage (over temperature) | | | | 7 | mV | VO = 1.4V, RS = 0Ω, VCC = 5V to 30V; TA = -40°C to +85°C (bold typeface) | 3 |+| Input Bias Current (25°C) | IIN+ or IIN- | | 25 | 250 | nA | IIN+ or IIN- with output in linear range, VCM = 0V; TA = +25°C (standard typeface) | 3 |+| Input Bias Current (over temperature) | IIN+ or IIN- | | | 400 | nA | IIN+ or IIN- with output in linear range, VCM = 0V; TA = -40°C to +85°C (bold typeface) | 3 |+| Input Offset Current (25°C) | IIN+-IIN- | | 5 | 50 | nA | IIN+-IIN-, VCM = 0V; TA = +25°C (standard typeface) | 3 |+| Input Offset Current (over temperature) | IIN+-IIN- | | | 200 | nA | IIN+-IIN-, VCM = 0V; TA = -40°C to +85°C (bold typeface) | 3 |+| Input Common Mode Voltage Range | | 0 | | | V | VCC = 30V | 3 |+| Supply Current (VCC = 5V, 25°C) | | | 0.4 | 1 | mA | RL = ∞, VCC = 5V; TA = +25°C (standard typeface) | 3 |+| Supply Current (VCC = 5V, over temperature) | | | | 2 | mA | RL = ∞, VCC = 5V; TA = -40°C to +85°C (bold typeface) | 3 |+| Supply Current (VCC = 30V, 25°C) | | | 0.7 | 1.7 | mA | RL = ∞, VCC = 30V; TA = +25°C (standard typeface) | 3 |+| Supply Current (VCC = 30V, over temperature) | | | | 3 | mA | RL = ∞, VCC = 30V; TA = -40°C to +85°C (bold typeface) | 3 |+| Voltage Gain | | 50 | 200 | | V/mV | VCC = 15V, RL ≥ 15kΩ, VO = 1V to 11V | 3 |+| Output Sink Current | | 6 | 16 | | mA | VIN- = 1V, VIN+ = 0V, VO = 1.5V | 3 |+| Output Leakage Current | | | | 1 | µA | VIN- = 0V, VIN+ = 1V, VO = 30V | 3 |+| Saturation Voltage (25°C) | | | 200 | 400 | mV | VIN- = 1V, VIN+ = 0, ISINK ≤ 4mA; TA = +25°C (standard typeface) | 3 |+| Saturation Voltage (over temperature) | | | | 500 | mV | VIN- = 1V, VIN+ = 0, ISINK ≤ 4mA; TA = -40°C to +85°C (bold typeface) | 3 |+| Supply Voltage (absolute maximum) | VCC | | | 40 | V | | 2 | | Differential Input Voltage | VID | | | 40 | V | | 2 | | Input Voltage | VIN | -0.3 | | 40 | V | | 2 | | Input Current | IIN | | | 50 | mA | VIN < -0.3V (Note 5) | 2 | | Power Dissipation (MSOP-8) | PD | | | 450 | mW | TA = +25°C | 2 | | Operating Junction Temperature | TJ | | | 150 | °C | | 2 | | Storage Temperature | TSTG | -65 | | 150 | °C | | 2 |-| Lead Temperature (Soldering) | TLEAD | | | 260 | °C | 10 seconds | 2 |-| Supply Voltage | VCC | 2 | | 36 | V | | 2 |+| Lead Temperature (soldering) | TLEAD | | | 260 | °C | Soldering, 10 seconds | 2 |+| Supply Voltage (recommended) | VCC | 2 | | 36 | V | | 2 | | Operating Temperature Range | TA | -40 | | 85 | °C | | 2 |-| Input Offset Voltage (AS393) | | | 1 | 5 | mV | VO = 1.4V, RS = 0Ω, VCC = 5V to 30V | 3 |-| Input Offset Voltage (AS393, over temperature) | | | | 7 | mV | | 3 |-| Input Bias Current | IIN+ or IIN- | | 25 | 250 | nA | Output in linear range, VCM = 0V | 3 |-| Input Bias Current (over temperature) | IIN+ or IIN- | | | 400 | nA | | 3 |-| Input Offset Current | IIN+-IIN- | | 5 | 50 | nA | VCM = 0V | 3 |-| Input Offset Current (over temperature) | IIN+-IIN- | | | 200 | nA | | 3 |-| Input Common Mode Voltage Range | | 0 | | | V | VCC = 30V | 3 |-| Supply Current (VCC = 5V) | ICC | | 0.4 | 1 | mA | RL = ∞, VCC = 5V | 3 |-| Supply Current (VCC = 5V, over temperature) | ICC | | | 2 | mA | | 3 |-| Supply Current (VCC = 30V) | ICC | | 0.7 | 1.7 | mA | RL = ∞, VCC = 30V | 3 |-| Supply Current (VCC = 30V, over temperature) | ICC | | | 3 | mA | | 3 |-| Voltage Gain | | 50 | 200 | | V/mV | VCC = 15V, RL ≥ 15kΩ, VO = 1V to 11V | 3 |-| Output Sink Current | | 6 | 16 | | mA | VIN- = 1V, VIN+ = 0V, VO = 1.5V | 3 |-| Output Leakage Current | | | | 1 | µA | VIN- = 0V, VIN+ = 1V, VO = 30V | 3 |-| Saturation Voltage | | | 200 | 400 | mV | VIN- = 1V, VIN+ = 0, ISINK ≤ 4mA | 3 |-| Saturation Voltage (over temperature) | | | | 500 | mV | | 3 |-| Thermal Resistance (Junction to Case, MSOP-8) | | | 24 | | °C/W | | 3 |-| Thermal Resistance (Junction to Ambient, MSOP-8) | | | 151 | | °C/W | | 3 |+| Thermal Resistance, Junction to Case (MSOP-8) | | | 24 | | °C/W | Junction to case | 3 |+| Thermal Resistance, Junction to Ambient (MSOP-8) | | | 151 | | °C/W | Junction to ambient | 3 | ## Materials and finish @@ -80,7 +80,7 @@ As the datasheet states them (page.json `metadata.appearance`; the 3D model's co Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Diodes Incorporated datasheet](https://www.diodes.com/assets/Datasheets/AS393MMTR-G1.pdf) (14 pp, sha256 `4612b4ecc06e13cb`, retrieved 2026-11-10, tier: manufacturer)+- **Datasheet:** [Diodes Incorporated datasheet](https://www.diodes.com/assets/Datasheets/AS393MMTR-G1.pdf) (14 pp, sha256 `4612b4ecc06e13cb`, retrieved 2026-11-11, tier: manufacturer) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).
as393mmtr-g1-hero.overlay.json+258−256@@ -1,260 +1,262 @@ {- "spec": "adom-hero 1.4",- "mpn": "AS393MMTR-G1",- "kind": "component + footprint reference art",- "board_use": false,- "plane_z_mm": -0.02,- "units": "metre",- "upAxis": "Z",- "layers": {- "pad_outlines": {- "material": "Footprint pads - teal dashed outlines - 50 percent opacity",- "rgba": [- 0.0,- 0.902,- 0.863,- 0.5- ],- "pads": 8,- "span_mm": 5.85,- "dash_mm": 0.1462,- "gap_mm": 0.0878,- "pad_stroke_mm": 0.0351- },- "silkscreen": {- "material": "Silkscreen reference lines - 30 percent opacity",- "rgba": [- 0.92,- 0.96,- 1.0,- 0.3- ],- "footprint_items": 7,- "pin1": {- "source": "footprint silkscreen",- "pad": "1"- }- },- "signal_names": {- "material": "Signal names - 50 percent opacity",- "rgba": [- 0.92,- 0.96,- 1.0,- 0.5- ],- "font": "DejaVu Sans Mono",- "labels": 8,- "sides": "top + mirrored underside (single-sided)",- "fallback_to_pad_number": 0- }+ "spec": "adom-hero 1.4",+ "mpn": "AS393MMTR-G1",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 8,+ "span_mm": 5.85,+ "dash_mm": 0.1462,+ "gap_mm": 0.0877,+ "pad_stroke_mm": 0.0351 },- "align": {- "ok": true,- "centre_offset_mm": 0.0,- "tolerance_mm": 0.468,- "orientation_flipped": false,- "contacts_bbox_mm": [- -2.45,- 2.45,- -1.125,- 1.125- ],- "pads_bbox_mm": [- -2.925,- 2.925,- -1.175,- 1.175- ],- "seating_z_mm": 0.0+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 7,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ } },- "sources": {- "glb": "as393mmtr-g1-etched.glb",- "glb_sha256": "abeec28686b0c63171044ff96966ff2fe957b3cd2e5cf7dc6e3a22ac0701db18",- "footprint": "as393mmtr-g1.kicad_mod",- "footprint_sha256": "aa2a69e6a856c785ee91e5ea0e66cf64512d6444f8b4a88e2916ebf4cbffc925",- "pins": "page.json component.pins",- "pins_sha256": "e3a6a6b430ed1c7c8ecb10b3c5b3172c7bbaf435ec2eaf7b937dd992c6b11931"- },- "generator": "adom-wiki 1.8.15 (component_hero)",- "labels": [- {- "pad": "1",- "text": "OUTPUT1",- "x": -3.025,- "y": -0.975,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "2",- "text": "INPUT1-",- "x": -3.025,- "y": -0.325,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "3",- "text": "INPUT1+",- "x": -3.025,- "y": 0.325,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "4",- "text": "GND",- "x": -3.025,- "y": 0.975,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "5",- "text": "INPUT2+",- "x": 3.025,- "y": 0.975,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "6",- "text": "INPUT2-",- "x": 3.025,- "y": 0.325,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "7",- "text": "OUTPUT2",- "x": 3.025,- "y": -0.325,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "8",- "text": "VCC",- "x": 3.025,- "y": -0.975,- "align": "left",- "vertical": false,- "h": 0.325- }+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 8,+ "sides": "top + mirrored underside (single-sided)",+ "omitted": null,+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "over_pads": true,+ "tolerance_mm": 0.468,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -2.45,+ 2.45,+ -1.125,+ 1.125+ ],+ "pads_bbox_mm": [+ -2.925,+ 2.925,+ -1.175,+ 1.175 ],- "pads": [- {- "number": "1",- "shape": "roundrect",- "center_mm": [- -2.1125,- -0.975- ],- "size_mm": [- 1.625,- 0.4- ],- "rot": 0.0- },- {- "number": "2",- "shape": "roundrect",- "center_mm": [- -2.1125,- -0.325- ],- "size_mm": [- 1.625,- 0.4- ],- "rot": 0.0- },- {- "number": "3",- "shape": "roundrect",- "center_mm": [- -2.1125,- 0.325- ],- "size_mm": [- 1.625,- 0.4- ],- "rot": 0.0- },- {- "number": "4",- "shape": "roundrect",- "center_mm": [- -2.1125,- 0.975- ],- "size_mm": [- 1.625,- 0.4- ],- "rot": 0.0- },- {- "number": "5",- "shape": "roundrect",- "center_mm": [- 2.1125,- 0.975- ],- "size_mm": [- 1.625,- 0.4- ],- "rot": 0.0- },- {- "number": "6",- "shape": "roundrect",- "center_mm": [- 2.1125,- 0.325- ],- "size_mm": [- 1.625,- 0.4- ],- "rot": 0.0- },- {- "number": "7",- "shape": "roundrect",- "center_mm": [- 2.1125,- -0.325- ],- "size_mm": [- 1.625,- 0.4- ],- "rot": 0.0- },- {- "number": "8",- "shape": "roundrect",- "center_mm": [- 2.1125,- -0.975- ],- "size_mm": [- 1.625,- 0.4- ],- "rot": 0.0- }- ]-}+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "as393mmtr-g1-etched.glb",+ "glb_sha256": "abeec28686b0c63171044ff96966ff2fe957b3cd2e5cf7dc6e3a22ac0701db18",+ "footprint": "as393mmtr-g1.kicad_mod",+ "footprint_sha256": "aa2a69e6a856c785ee91e5ea0e66cf64512d6444f8b4a88e2916ebf4cbffc925",+ "pins": "page.json component.pins",+ "pins_sha256": "e3a6a6b430ed1c7c8ecb10b3c5b3172c7bbaf435ec2eaf7b937dd992c6b11931"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+ {+ "pad": "1",+ "text": "OUTPUT1",+ "x": -3.025,+ "y": -0.975,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "2",+ "text": "INPUT1-",+ "x": -3.025,+ "y": -0.325,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "3",+ "text": "INPUT1+",+ "x": -3.025,+ "y": 0.325,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "4",+ "text": "GND",+ "x": -3.025,+ "y": 0.975,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "5",+ "text": "INPUT2+",+ "x": 3.025,+ "y": 0.975,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "6",+ "text": "INPUT2-",+ "x": 3.025,+ "y": 0.325,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "7",+ "text": "OUTPUT2",+ "x": 3.025,+ "y": -0.325,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "8",+ "text": "VCC",+ "x": 3.025,+ "y": -0.975,+ "align": "left",+ "vertical": false,+ "h": 0.325+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -2.1125,+ -0.975+ ],+ "size_mm": [+ 1.625,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -2.1125,+ -0.325+ ],+ "size_mm": [+ 1.625,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -2.1125,+ 0.325+ ],+ "size_mm": [+ 1.625,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -2.1125,+ 0.975+ ],+ "size_mm": [+ 1.625,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ 2.1125,+ 0.975+ ],+ "size_mm": [+ 1.625,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ 2.1125,+ 0.325+ ],+ "size_mm": [+ 1.625,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ 2.1125,+ -0.325+ ],+ "size_mm": [+ 1.625,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ 2.1125,+ -0.975+ ],+ "size_mm": [+ 1.625,+ 0.4+ ],+ "rot": 0.0+ }+ ]+}
as393mmtr-g1.lbr+14−3@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>Diodes Incorporated Comparators, MSOP-8. Pinout cross-checked by two models against the datasheet</description> <packages> <package name="MSOP-8_3x3mm_P0.65mm"> <description>MSOP-8, 3 x 3 mm, 0.65 mm pitch</description>@@ -86,6 +86,7 @@ </packages> <symbols> <symbol name="AS393MMTR-G1">+ <description>Diodes Incorporated Comparators, MSOP-8. Pinout cross-checked by two models against the datasheet</description> <wire x1="-12.7" y1="5.08" x2="12.7" y2="5.08" width="0.254" layer="94"/> <wire x1="12.7" y1="5.08" x2="12.7" y2="-7.62" width="0.254" layer="94"/> <wire x1="12.7" y1="-7.62" x2="-12.7" y2="-7.62" width="0.254" layer="94"/>@@ -104,7 +105,7 @@ </symbols> <devicesets> <deviceset name="AS393MMTR-G1" prefix="U">- <description></description>+ <description>Diodes Incorporated Comparators, MSOP-8. Pinout cross-checked by two models against the datasheet</description> <gates> <gate name="G$1" symbol="AS393MMTR-G1" x="0" y="0"/> </gates>@@ -120,7 +121,17 @@ <connect gate="G$1" pin="INPUT2-" pad="6"/> <connect gate="G$1" pin="INPUT2+" pad="5"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="AS393MMTR-G1" constant="no"/>+ <attribute name="MANUFACTURER" value="Diodes Incorporated" constant="no"/>+ <attribute name="DATASHEET" value="https://www.diodes.com/assets/Datasheets/AS393MMTR-G1.pdf" constant="no"/>+ <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/as393mmtr-g1" constant="no"/>+ <attribute name="MOUSER_PN" value="621-AS393MMTR-G1" constant="no"/>+ <attribute name="DIGIKEY_PN" value="AS393MMTR-G1DITR-ND" constant="no"/>+ <attribute name="LCSC_PN" value="C3658480" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>
package.json+17−18@@ -1,6 +1,6 @@ { "slug": "as393mmtr-g1",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Diodes Incorporated Comparators, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -54,12 +54,11 @@ "mouser": "621-AS393MMTR-G1" }, "distributor_check": {- "checked_at": "2026-11-10T06:49:57Z",+ "checked_at": "2026-11-11T00:21:36Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "AS393MMTR-G1DITR-ND",- "status": "found",- "lifecycle": "Active"+ "status": "found" }, "mouser": { "pn": "621-AS393MMTR-G1",@@ -71,49 +70,49 @@ "number": "1", "name": "OUTPUT1", "type": "output",- "description": "Open-collector output of comparator 1, with a low output saturation voltage of 200mV at 4mA and a maximum saturation of 400mV."+ "description": "Open-collector output of comparator 1; the datasheet gives a saturation voltage of 200 mV typical at 4 mA sink and a sink current of 6.0 mA minimum." }, { "number": "2", "name": "INPUT1-", "type": "input",- "description": "Inverting input of comparator 1; the input common-mode voltage must not go below -0.3V at +25°C and the input can withstand up to +36V."+ "description": "Inverting input of comparator 1; the common-mode range is 0 V to VCC-1.5 V and the input can be driven up to +36 V without damage, but should not go below -0.3 V." }, { "number": "3", "name": "INPUT1+", "type": "input",- "description": "Non-inverting input of comparator 1; the common-mode range extends from 0V to VCC-1.5V and the input can withstand up to +36V."+ "description": "Non-inverting input of comparator 1; the common-mode range is 0 V to VCC-1.5 V and the input can be driven up to +36 V without damage, but should not go below -0.3 V." }, { "number": "4", "name": "GND", "type": "power_in",- "description": "Ground reference pin (0V), which is also the negative supply for split-supply operation, with the input common-mode range including ground."+ "description": "Ground reference (0 V) for the device; the datasheet specifies GND = 0 V for the electrical characteristics." }, { "number": "5", "name": "INPUT2+", "type": "input",- "description": "Non-inverting input of comparator 2; the common-mode range extends from 0V to VCC-1.5V and the input can withstand up to +36V."+ "description": "Non-inverting input of comparator 2; the common-mode range is 0 V to VCC-1.5 V and the input can be driven up to +36 V without damage, but should not go below -0.3 V." }, { "number": "6", "name": "INPUT2-", "type": "input",- "description": "Inverting input of comparator 2; the input common-mode voltage must not go below -0.3V at +25°C and the input can withstand up to +36V."+ "description": "Inverting input of comparator 2; the common-mode range is 0 V to VCC-1.5 V and the input can be driven up to +36 V without damage, but should not go below -0.3 V." }, { "number": "7", "name": "OUTPUT2", "type": "output",- "description": "Open-collector output of comparator 2, with a low output saturation voltage of 200mV at 4mA and a maximum saturation of 400mV."+ "description": "Open-collector output of comparator 2; the datasheet gives a saturation voltage of 200 mV typical at 4 mA sink and a sink current of 6.0 mA minimum." }, { "number": "8", "name": "VCC", "type": "power_in",- "description": "Positive supply pin; single supply 2V to 36V or dual supplies ±1.0V to ±18V per the recommended operating conditions."+ "description": "Positive supply: 2 V to 36 V single supply (absolute maximum 40 V), or ±1.0 V to ±18 V dual supplies." } ], "provenance": {@@ -127,11 +126,11 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The MSOP-8 pin labels in the page 1 text extraction are not in pin-number order, so the numbering wa"+ "extractor flagged: The MSOP-8 pin-to-name mapping is not stated unambiguously in the extracted text. The pin numbers (1; The page 1 pin assignment figure is shared by the SO-8, TSSOP-8 and MSOP-8 packages, so the same pin" ], "pages_sent": 14,- "cost_usd": 0.0588,- "at": "2026-11-10T06:49:43"+ "cost_usd": 0.0576,+ "at": "2026-11-11T00:21:21" }, "datasheet": { "url": "https://www.diodes.com/assets/Datasheets/AS393MMTR-G1.pdf",@@ -168,7 +167,7 @@ "centre_offset_mm": 0.0, "footprint_binding": "identity", "sha256": "847c4c5023fe1603fbd36900a5dcc4bd3901ba473f71d42c9a469f0236eaadf3",- "checked": "2026-11-10",+ "checked": "2026-11-11", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -186,8 +185,8 @@ "zmin_mm": -0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "3d0ebdf35c75f546d43bb85780a054dc04513f0e691ccc95aa84d320dec55c0c",- "checked": "2026-11-10",+ "sha256": "c745ec948b198daf3edf42b733d3f7bb2e321a91ad96e6479dea7930b8344468",+ "checked": "2026-11-11", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ],
page.json+20−19@@ -4,7 +4,7 @@ "slug": "as393mmtr-g1", "title": "AS393MMTR-G1", "brief": "Diodes Incorporated Comparators, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.1.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -36,12 +36,11 @@ "mouser": "621-AS393MMTR-G1" }, "distributor_check": {- "checked_at": "2026-11-10T06:49:57Z",+ "checked_at": "2026-11-11T00:21:36Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "AS393MMTR-G1DITR-ND",- "status": "found",- "lifecycle": "Active"+ "status": "found" }, "mouser": { "pn": "621-AS393MMTR-G1",@@ -53,49 +52,49 @@ "number": "1", "name": "OUTPUT1", "type": "output",- "description": "Open-collector output of comparator 1, with a low output saturation voltage of 200mV at 4mA and a maximum saturation of 400mV."+ "description": "Open-collector output of comparator 1; the datasheet gives a saturation voltage of 200 mV typical at 4 mA sink and a sink current of 6.0 mA minimum." }, { "number": "2", "name": "INPUT1-", "type": "input",- "description": "Inverting input of comparator 1; the input common-mode voltage must not go below -0.3V at +25°C and the input can withstand up to +36V."+ "description": "Inverting input of comparator 1; the common-mode range is 0 V to VCC-1.5 V and the input can be driven up to +36 V without damage, but should not go below -0.3 V." }, { "number": "3", "name": "INPUT1+", "type": "input",- "description": "Non-inverting input of comparator 1; the common-mode range extends from 0V to VCC-1.5V and the input can withstand up to +36V."+ "description": "Non-inverting input of comparator 1; the common-mode range is 0 V to VCC-1.5 V and the input can be driven up to +36 V without damage, but should not go below -0.3 V." }, { "number": "4", "name": "GND", "type": "power_in",- "description": "Ground reference pin (0V), which is also the negative supply for split-supply operation, with the input common-mode range including ground."+ "description": "Ground reference (0 V) for the device; the datasheet specifies GND = 0 V for the electrical characteristics." }, { "number": "5", "name": "INPUT2+", "type": "input",- "description": "Non-inverting input of comparator 2; the common-mode range extends from 0V to VCC-1.5V and the input can withstand up to +36V."+ "description": "Non-inverting input of comparator 2; the common-mode range is 0 V to VCC-1.5 V and the input can be driven up to +36 V without damage, but should not go below -0.3 V." }, { "number": "6", "name": "INPUT2-", "type": "input",- "description": "Inverting input of comparator 2; the input common-mode voltage must not go below -0.3V at +25°C and the input can withstand up to +36V."+ "description": "Inverting input of comparator 2; the common-mode range is 0 V to VCC-1.5 V and the input can be driven up to +36 V without damage, but should not go below -0.3 V." }, { "number": "7", "name": "OUTPUT2", "type": "output",- "description": "Open-collector output of comparator 2, with a low output saturation voltage of 200mV at 4mA and a maximum saturation of 400mV."+ "description": "Open-collector output of comparator 2; the datasheet gives a saturation voltage of 200 mV typical at 4 mA sink and a sink current of 6.0 mA minimum." }, { "number": "8", "name": "VCC", "type": "power_in",- "description": "Positive supply pin; single supply 2V to 36V or dual supplies ±1.0V to ±18V per the recommended operating conditions."+ "description": "Positive supply: 2 V to 36 V single supply (absolute maximum 40 V), or ±1.0 V to ±18 V dual supplies." } ], "provenance": {@@ -109,11 +108,11 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The MSOP-8 pin labels in the page 1 text extraction are not in pin-number order, so the numbering wa"+ "extractor flagged: The MSOP-8 pin-to-name mapping is not stated unambiguously in the extracted text. The pin numbers (1; The page 1 pin assignment figure is shared by the SO-8, TSSOP-8 and MSOP-8 packages, so the same pin" ], "pages_sent": 14,- "cost_usd": 0.0588,- "at": "2026-11-10T06:49:43"+ "cost_usd": 0.0576,+ "at": "2026-11-11T00:21:21" }, "datasheet": { "url": "https://www.diodes.com/assets/Datasheets/AS393MMTR-G1.pdf",@@ -150,7 +149,7 @@ "centre_offset_mm": 0, "footprint_binding": "identity", "sha256": "847c4c5023fe1603fbd36900a5dcc4bd3901ba473f71d42c9a469f0236eaadf3",- "checked": "2026-11-10",+ "checked": "2026-11-11", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -168,8 +167,8 @@ "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "3d0ebdf35c75f546d43bb85780a054dc04513f0e691ccc95aa84d320dec55c0c",- "checked": "2026-11-10",+ "sha256": "c745ec948b198daf3edf42b733d3f7bb2e321a91ad96e6479dea7930b8344468",+ "checked": "2026-11-11", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ],@@ -622,5 +621,7 @@ ], "visibility": { "public": true- }+ },+ "description": "Diodes Incorporated Comparators, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "org": "adom" }