main
Ray Publish 0.1.0 4f60966
{
  "slug": "ads8509ibdwr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Analog To Digital Converters (ADCs), SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "adc-dac-data conversion",
    "ads8509ibdwr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ads8509ibdwr.kicad_sym",
    "ads8509ibdwr.kicad_mod",
    "ads8509ibdwr.glb",
    "ads8509ibdwr.step",
    "ads8509ibdwr.lbr",
    "docs/hero.png",
    "docs/ads8509ibdwr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ads8509ibdwr-hero.glb",
    "ads8509ibdwr-hero.overlay.json",
    "ads8509ibdwr-etched.glb"
  ],
  "component": {
    "mpn": "ADS8509IBDWR",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-20-300mil",
    "pin_count": 20,
    "category": "ADC/DAC/Data Conversion",
    "subcategory": "Analog To Digital Converters (ADCs)",
    "datasheet": "https://www.ti.com/lit/ds/symlink/ads8509ibdwr.pdf",
    "parts": {
      "symbol": "ads8509ibdwr.kicad_sym",
      "footprint": "ads8509ibdwr.kicad_mod",
      "model_3d": "ads8509ibdwr-hero.glb",
      "model_3d_plain": "ads8509ibdwr-etched.glb",
      "model_3d_step": "ads8509ibdwr-etched.step",
      "model_3d_step_plain": "ads8509ibdwr.step",
      "lbr": "ads8509ibdwr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2670701",
      "digikey": "ADS8509IBDWR-ND",
      "mouser": "595-ADS8509IBDWR"
    },
    "distributor_check": {
      "checked_at": "2026-11-12T07:30:12Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "ADS8509IBDWR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-ADS8509IBDWR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "R1IN",
        "type": "input",
        "description": "Analog input; see Table 2 for input range connections."
      },
      {
        "number": "2",
        "name": "AGND1",
        "type": "power_in",
        "description": "Analog ground, used internally as the ground reference point with minimal current flow."
      },
      {
        "number": "3",
        "name": "R2IN",
        "type": "input",
        "description": "Analog input; see Table 2 for input range connections."
      },
      {
        "number": "4",
        "name": "R3IN",
        "type": "input",
        "description": "Analog input; see Table 2 for input range connections."
      },
      {
        "number": "5",
        "name": "CAP",
        "type": "passive",
        "description": "Reference buffer capacitor, 2.2-mF tantalum to ground (unit as printed in the datasheet)."
      },
      {
        "number": "6",
        "name": "REF",
        "type": "bidirectional",
        "description": "Reference input/output that outputs the internal 2.5-V reference or accepts an external system reference; bypass to ground with a 2.2-mF tantalum capacitor."
      },
      {
        "number": "7",
        "name": "AGND2",
        "type": "power_in",
        "description": "Analog ground."
      },
      {
        "number": "8",
        "name": "SB/BTC",
        "type": "input",
        "description": "Selects output data format: high for straight binary, low for binary 2's complement."
      },
      {
        "number": "9",
        "name": "EXT/INT",
        "type": "input",
        "description": "Selects external or internal clock for data transmission: high for external DATACLK, low for internal clock where a convert command starts data transmission with 16 DATACLK pulses."
      },
      {
        "number": "10",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital ground."
      },
      {
        "number": "11",
        "name": "SYNC",
        "type": "output",
        "description": "Sync output that supplies a data synchronization pulse when EXT is high and at least one external clock pulse has occurred when not in read mode."
      },
      {
        "number": "12",
        "name": "DATACLK",
        "type": "bidirectional",
        "description": "Input or output depending on EXT/INT level; output data is synchronized to this clock."
      },
      {
        "number": "13",
        "name": "DATA",
        "type": "output",
        "description": "Serial data output, synchronized to DATACLK with format set by SB/BTC."
      },
      {
        "number": "14",
        "name": "TAG",
        "type": "input",
        "description": "Tag input for external clock mode; when EXT is high, its digital data is output on DATA after 16 bits."
      },
      {
        "number": "15",
        "name": "R/C",
        "type": "input",
        "description": "Read/convert input; with CS low, a falling edge starts a conversion and holds the sample-and-hold."
      },
      {
        "number": "16",
        "name": "CS",
        "type": "input",
        "description": "Chip select, internally ORed with R/C."
      },
      {
        "number": "17",
        "name": "BUSY",
        "type": "output",
        "description": "Busy output that falls when a conversion starts and stays low until the data is latched into the output shift register."
      },
      {
        "number": "18",
        "name": "PWRD",
        "type": "input",
        "description": "Power-down input; when high, conversions are inhibited and power consumption is significantly reduced."
      },
      {
        "number": "19",
        "name": "VANA",
        "type": "power_in",
        "description": "Analog supply input, nominally +5 V; connect directly to pin 20 and decouple with 0.1-mF ceramic and 10-mF tantalum capacitors."
      },
      {
        "number": "20",
        "name": "VDIG",
        "type": "power_in",
        "description": "Digital supply input, nominally +5 V; connect directly to pin 19 and must be ≤ VANA."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The Terminal Functions table gives these pins a direction of '–' rather than I or O; types were assi; The table lists these supply pins as I; they are typed power_in following KiCad convention for suppl; The capacitor values are printed as '2.2-mF' and '0.1-mF'/'10-mF' in the extracted text, which is li"
        ],
        "pages_sent": 10,
        "cost_usd": 0.0039,
        "at": "2026-11-12T07:30:05"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/ads8509ibdwr.pdf",
        "pages": 35,
        "sha256": "862b91c3a8670e55",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 20,
        "described": 20,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ads8509ibdwr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          12.8,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "59a10b341e6972b31d81802a048060326da627d8b92dcf4263064f4f62ec808e",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ads8509ibdwr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          12.8,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "60fed08b0910f2aefd9243e2c321d111d0dd7c8eaf84811ebfe73610093b424e",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "DW0020A",
      "source_page": 32,
      "D": {
        "nom_mm": 12.8,
        "range_mm": [
          12.6,
          13.0
        ]
      },
      "E1": {
        "nom_mm": 7.5,
        "range_mm": [
          7.4,
          7.6
        ]
      },
      "E": {
        "nom_mm": 10.3,
        "range_mm": [
          9.97,
          10.63
        ]
      },
      "e": {
        "nom_mm": 1.27,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 2.65,
        "range_mm": [
          null,
          2.65
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "ads8509ibdwr.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}