Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ADS8509IBDWR

Texas Instruments · Analog To Digital Converters (ADCs) · SOIC-20-300mil

ADS8509IBDWR from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 R1IN input Analog input; see Table 2 for input range connections.
2 AGND1 power_in Analog ground, used internally as the ground reference point with minimal current flow.
3 R2IN input Analog input; see Table 2 for input range connections.
4 R3IN input Analog input; see Table 2 for input range connections.
5 CAP passive Reference buffer capacitor, 2.2-mF tantalum to ground (unit as printed in the datasheet).
6 REF bidirectional Reference input/output that outputs the internal 2.5-V reference or accepts an external system reference; bypass to ground with a 2.2-mF tantalum capacitor.
7 AGND2 power_in Analog ground.
8 SB/BTC input Selects output data format: high for straight binary, low for binary 2's complement.
9 EXT/INT input Selects external or internal clock for data transmission: high for external DATACLK, low for internal clock where a convert command starts data transmission with 16 DATACLK pulses.
10 DGND power_in Digital ground.
11 SYNC output Sync output that supplies a data synchronization pulse when EXT is high and at least one external clock pulse has occurred when not in read mode.
12 DATACLK bidirectional Input or output depending on EXT/INT level; output data is synchronized to this clock.
13 DATA output Serial data output, synchronized to DATACLK with format set by SB/BTC.
14 TAG input Tag input for external clock mode; when EXT is high, its digital data is output on DATA after 16 bits.
15 R/C input Read/convert input; with CS low, a falling edge starts a conversion and holds the sample-and-hold.
16 CS input Chip select, internally ORed with R/C.
17 BUSY output Busy output that falls when a conversion starts and stays low until the data is latched into the output shift register.
18 PWRD input Power-down input; when high, conversions are inhibited and power consumption is significantly reduced.
19 VANA power_in Analog supply input, nominally +5 V; connect directly to pin 20 and decouple with 0.1-mF ceramic and 10-mF tantalum capacitors.
20 VDIG power_in Digital supply input, nominally +5 V; connect directly to pin 19 and must be ≤ VANA.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-20-300mil
Category ADC/DAC/Data Conversion
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Analog input R1IN overvoltage protection -25 25 V 2
Analog input R2IN overvoltage protection -25 25 V 2
Analog input R3IN overvoltage protection -25 25 V 2
Ground voltage differences (DGND, AGND2) -0.3 0.3 V 2
VANA VANA 6 V 2
VDIG VDIG 6 V 2
Ground voltage difference VDIG to VANA 0.3 V 2
Digital inputs voltage (lower limit) -0.3 V 2
Maximum junction temperature 165 °C 2
Storage temperature range -65 150 °C 2
Internal power dissipation 700 mW 2
Integral linearity error (INL) INL -2 2 LSB 3
Differential linearity error (DNL) DNL -1 1 LSB 3
No missing codes 16 Bits 3
Full-scale error, internal reference -0.5 0.5 %FSR Full-scale ±10-V range, int. ref. with 0.1% external fixed resistors 3
Full-scale error, external reference -0.5 0.5 %FSR Full-scale ±10-V range, ext. ref. with 0.1% external fixed resistors 3
Full-scale error drift, internal reference -7 7 ppm/°C Int. ref. 3
Full-scale error drift, external reference -2 2 ppm/°C Ext. ref. 3
Bipolar zero error -5 5 mV 3
Bipolar zero error drift -0.4 0.4 ppm/°C 3
Unipolar zero error -5 5 mV 10-V range 3
Unipolar zero error -3 3 mV 4-V and 5-V range 3
Unipolar zero error drift -2 2 ppm/°C 3
Power supply sensitivity -8 8 LSB +4.75 V < VD < +5.25 V (VDIG = VANA = VD) 3
Spurious-free dynamic range (SFDR) 95 99 dB fI = 20 kHz 3
Total harmonic distortion (THD) -98 -93 dB fI = 20 kHz 3
Signal-to-(noise+distortion) (SINAD) SINAD 85 88 dB fI = 20 kHz 3
Signal-to-noise ratio (SNR) SNR 86 88 dB fI = 20 kHz 3
Internal reference voltage 2.48 2.5 2.52 V No load 4
External reference voltage range 2.3 2.5 2.7 V for specified linearity 4
Low-level input voltage VIL -0.3 0.8 V 4
High-level input voltage VIH 2 V 4
Low-level input current IIL -10 10 mA VIL = 0 V 4
High-level input current IIH -10 10 mA VIH = 5 V 4
External data clock frequency 0.1 26 MHz EXT/INT High 4
Internal data clock frequency 9 MHz EXT/INT Low 4
Low-level output voltage VOL 0.4 V ISINK = 1.6 mA 4
High-level output voltage VOH 4 V ISOURCE = 500 mA 4
Hi-Z state leakage current -5 5 mA VOUT = 0 V to VDIG 4
Digital input voltage VDIG 4.75 5 5.25 V 4
Analog input voltage VANA 4.75 5 5.25 V 4
Digital input current IDIG 4 mA 4
Analog input current IANA 10 mA 4
Power dissipation, PWRD low 70 100 mW fS = 250 kHz 4
Specified performance temperature range -40 85 °C 4
Derated performance temperature range -55 125 °C 4
Total ESR of CAP and REF compensation capacitors 3 Ω 2.2-µF capacitors on CAP and REF pins 18
Thermal resistance junction-to-ambient (SO package) qJA 46 °C/W 4

CAD (KiCad official)

  • Symbol: ADS8509IBDWR
  • Footprint: Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm
  • 3D model: SOIC-20-300mil (KiCad packages3D, STEP)
  • 3D model files: ads8509ibdwr-etched.step / ads8509ibdwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ads8509ibdwr.step / ads8509ibdwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (35 pp, sha256 862b91c3a8670e55, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF