Generated by kicad-footprint-generator · KiCad file format 20260206
ADS8509IBDWR
Texas Instruments · Analog To Digital Converters (ADCs) · SOIC-20-300mil
ADS8509IBDWR from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | R1IN | input | Analog input; see Table 2 for input range connections. |
| 2 | AGND1 | power_in | Analog ground, used internally as the ground reference point with minimal current flow. |
| 3 | R2IN | input | Analog input; see Table 2 for input range connections. |
| 4 | R3IN | input | Analog input; see Table 2 for input range connections. |
| 5 | CAP | passive | Reference buffer capacitor, 2.2-mF tantalum to ground (unit as printed in the datasheet). |
| 6 | REF | bidirectional | Reference input/output that outputs the internal 2.5-V reference or accepts an external system reference; bypass to ground with a 2.2-mF tantalum capacitor. |
| 7 | AGND2 | power_in | Analog ground. |
| 8 | SB/BTC | input | Selects output data format: high for straight binary, low for binary 2's complement. |
| 9 | EXT/INT | input | Selects external or internal clock for data transmission: high for external DATACLK, low for internal clock where a convert command starts data transmission with 16 DATACLK pulses. |
| 10 | DGND | power_in | Digital ground. |
| 11 | SYNC | output | Sync output that supplies a data synchronization pulse when EXT is high and at least one external clock pulse has occurred when not in read mode. |
| 12 | DATACLK | bidirectional | Input or output depending on EXT/INT level; output data is synchronized to this clock. |
| 13 | DATA | output | Serial data output, synchronized to DATACLK with format set by SB/BTC. |
| 14 | TAG | input | Tag input for external clock mode; when EXT is high, its digital data is output on DATA after 16 bits. |
| 15 | R/C | input | Read/convert input; with CS low, a falling edge starts a conversion and holds the sample-and-hold. |
| 16 | CS | input | Chip select, internally ORed with R/C. |
| 17 | BUSY | output | Busy output that falls when a conversion starts and stays low until the data is latched into the output shift register. |
| 18 | PWRD | input | Power-down input; when high, conversions are inhibited and power consumption is significantly reduced. |
| 19 | VANA | power_in | Analog supply input, nominally +5 V; connect directly to pin 20 and decouple with 0.1-mF ceramic and 10-mF tantalum capacitors. |
| 20 | VDIG | power_in | Digital supply input, nominally +5 V; connect directly to pin 19 and must be ≤ VANA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-20-300mil |
| Category | ADC/DAC/Data Conversion |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Analog input R1IN overvoltage protection | -25 | 25 | V | 2 | |||
| Analog input R2IN overvoltage protection | -25 | 25 | V | 2 | |||
| Analog input R3IN overvoltage protection | -25 | 25 | V | 2 | |||
| Ground voltage differences (DGND, AGND2) | -0.3 | 0.3 | V | 2 | |||
| VANA | VANA | 6 | V | 2 | |||
| VDIG | VDIG | 6 | V | 2 | |||
| Ground voltage difference VDIG to VANA | 0.3 | V | 2 | ||||
| Digital inputs voltage (lower limit) | -0.3 | V | 2 | ||||
| Maximum junction temperature | 165 | °C | 2 | ||||
| Storage temperature range | -65 | 150 | °C | 2 | |||
| Internal power dissipation | 700 | mW | 2 | ||||
| Integral linearity error (INL) | INL | -2 | 2 | LSB | 3 | ||
| Differential linearity error (DNL) | DNL | -1 | 1 | LSB | 3 | ||
| No missing codes | 16 | Bits | 3 | ||||
| Full-scale error, internal reference | -0.5 | 0.5 | %FSR | Full-scale ±10-V range, int. ref. with 0.1% external fixed resistors | 3 | ||
| Full-scale error, external reference | -0.5 | 0.5 | %FSR | Full-scale ±10-V range, ext. ref. with 0.1% external fixed resistors | 3 | ||
| Full-scale error drift, internal reference | -7 | 7 | ppm/°C | Int. ref. | 3 | ||
| Full-scale error drift, external reference | -2 | 2 | ppm/°C | Ext. ref. | 3 | ||
| Bipolar zero error | -5 | 5 | mV | 3 | |||
| Bipolar zero error drift | -0.4 | 0.4 | ppm/°C | 3 | |||
| Unipolar zero error | -5 | 5 | mV | 10-V range | 3 | ||
| Unipolar zero error | -3 | 3 | mV | 4-V and 5-V range | 3 | ||
| Unipolar zero error drift | -2 | 2 | ppm/°C | 3 | |||
| Power supply sensitivity | -8 | 8 | LSB | +4.75 V < VD < +5.25 V (VDIG = VANA = VD) | 3 | ||
| Spurious-free dynamic range (SFDR) | 95 | 99 | dB | fI = 20 kHz | 3 | ||
| Total harmonic distortion (THD) | -98 | -93 | dB | fI = 20 kHz | 3 | ||
| Signal-to-(noise+distortion) (SINAD) | SINAD | 85 | 88 | dB | fI = 20 kHz | 3 | |
| Signal-to-noise ratio (SNR) | SNR | 86 | 88 | dB | fI = 20 kHz | 3 | |
| Internal reference voltage | 2.48 | 2.5 | 2.52 | V | No load | 4 | |
| External reference voltage range | 2.3 | 2.5 | 2.7 | V | for specified linearity | 4 | |
| Low-level input voltage | VIL | -0.3 | 0.8 | V | 4 | ||
| High-level input voltage | VIH | 2 | V | 4 | |||
| Low-level input current | IIL | -10 | 10 | mA | VIL = 0 V | 4 | |
| High-level input current | IIH | -10 | 10 | mA | VIH = 5 V | 4 | |
| External data clock frequency | 0.1 | 26 | MHz | EXT/INT High | 4 | ||
| Internal data clock frequency | 9 | MHz | EXT/INT Low | 4 | |||
| Low-level output voltage | VOL | 0.4 | V | ISINK = 1.6 mA | 4 | ||
| High-level output voltage | VOH | 4 | V | ISOURCE = 500 mA | 4 | ||
| Hi-Z state leakage current | -5 | 5 | mA | VOUT = 0 V to VDIG | 4 | ||
| Digital input voltage | VDIG | 4.75 | 5 | 5.25 | V | 4 | |
| Analog input voltage | VANA | 4.75 | 5 | 5.25 | V | 4 | |
| Digital input current | IDIG | 4 | mA | 4 | |||
| Analog input current | IANA | 10 | mA | 4 | |||
| Power dissipation, PWRD low | 70 | 100 | mW | fS = 250 kHz | 4 | ||
| Specified performance temperature range | -40 | 85 | °C | 4 | |||
| Derated performance temperature range | -55 | 125 | °C | 4 | |||
| Total ESR of CAP and REF compensation capacitors | 3 | Ω | 2.2-µF capacitors on CAP and REF pins | 18 | |||
| Thermal resistance junction-to-ambient (SO package) | qJA | 46 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
ADS8509IBDWR - Footprint:
Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm - 3D model: SOIC-20-300mil (KiCad packages3D, STEP)
- 3D model files:
ads8509ibdwr-etched.step/ads8509ibdwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ads8509ibdwr.step/ads8509ibdwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
862b91c3a8670e55, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).