main
Ray
Publish 0.1.0
bf6e549
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344
{
"slug": "adm3307eacpz",
"version": "0.1.0",
"type": "component",
"description": "Analog Devices RS232 ICs, LFCSP-32(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"communication interface chip-uart-485-232",
"adm3307eacpz",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"adm3307eacpz.kicad_sym",
"adm3307eacpz.kicad_mod",
"adm3307eacpz.glb",
"adm3307eacpz.step",
"adm3307eacpz.lbr",
"docs/hero.png",
"docs/adm3307eacpz-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"adm3307eacpz-hero.glb",
"adm3307eacpz-hero.overlay.json"
],
"component": {
"mpn": "ADM3307EACPZ",
"manufacturer": "Analog Devices",
"package": "LFCSP-32(5x5)",
"pin_count": 33,
"category": "Communication Interface Chip/UART/485/232",
"subcategory": "RS232 ICs",
"datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADM3307E_3310E_3311E_3312E_3315E.pdf",
"parts": {
"symbol": "adm3307eacpz.kicad_sym",
"footprint": "adm3307eacpz.kicad_mod",
"model_3d": "adm3307eacpz-hero.glb",
"model_3d_plain": "adm3307eacpz.glb",
"model_3d_step": "adm3307eacpz-etched.step",
"model_3d_step_plain": "adm3307eacpz.step",
"lbr": "adm3307eacpz.lbr"
},
"distributor_links": {
"lcsc": "C658205",
"digikey": "ADM3307EACPZ-ND",
"mouser": "584-ADM3307EACPZ"
},
"distributor_check": {
"checked_at": "2026-10-30T20:56:54Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "ADM3307EACPZ-ND",
"status": "found"
},
"mouser": {
"pn": "584-ADM3307EACPZ",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "EN",
"type": "input",
"description": "Receiver enable; a high level three-states all receiver outputs, with ±15 kV ESD protection on the ADM3307E."
},
{
"number": "2",
"name": "SD",
"type": "input",
"description": "Shutdown control; a high level disables the charge pump and transmitters and cuts quiescent current to less than 1 µA, with ROUT3 remaining active."
},
{
"number": "3",
"name": "NC",
"type": "unconnected",
"description": "No connect; do not connect to this pin."
},
{
"number": "4",
"name": "T1IN",
"type": "input",
"description": "Transmitter 1 input accepting TTL/CMOS levels, with an internal 400 kΩ pull-up resistor to VCC."
},
{
"number": "5",
"name": "T2IN",
"type": "input",
"description": "Transmitter 2 input accepting TTL/CMOS levels, with an internal 400 kΩ pull-up resistor to VCC."
},
{
"number": "6",
"name": "T3IN",
"type": "input",
"description": "Transmitter 3 input accepting TTL/CMOS levels, with an internal 400 kΩ pull-up resistor to VCC."
},
{
"number": "7",
"name": "T4IN",
"type": "input",
"description": "Transmitter 4 input accepting TTL/CMOS levels, with an internal 400 kΩ pull-up resistor to VCC."
},
{
"number": "8",
"name": "T5IN",
"type": "input",
"description": "Transmitter 5 input accepting TTL/CMOS levels, with an internal 400 kΩ pull-up resistor to VCC."
},
{
"number": "9",
"name": "NC",
"type": "unconnected",
"description": "No connect; do not connect to this pin."
},
{
"number": "10",
"name": "R1OUT",
"type": "output",
"description": "Receiver 1 output at TTL/CMOS levels, three-stated when EN is high."
},
{
"number": "11",
"name": "R2OUT",
"type": "output",
"description": "Receiver 2 output at TTL/CMOS levels, three-stated when EN is high."
},
{
"number": "12",
"name": "R3OUT",
"type": "output",
"description": "Receiver 3 output at TTL/CMOS levels, which stays active in shutdown when EN is low."
},
{
"number": "13",
"name": "NC",
"type": "unconnected",
"description": "No connect; do not connect to this pin."
},
{
"number": "14",
"name": "R3IN",
"type": "input",
"description": "Receiver 3 input accepting RS-232 levels (±25 V range), with an internal 5 kΩ pull-down to GND."
},
{
"number": "15",
"name": "R2IN",
"type": "input",
"description": "Receiver 2 input accepting RS-232 levels (±25 V range), with an internal 5 kΩ pull-down to GND."
},
{
"number": "16",
"name": "R1IN",
"type": "input",
"description": "Receiver 1 input accepting RS-232 levels (±25 V range), with an internal 5 kΩ pull-down to GND."
},
{
"number": "17",
"name": "T5OUT",
"type": "output",
"description": "Transmitter 5 RS-232 output, typically ±5.5 V, with ±15 kV ESD protection."
},
{
"number": "18",
"name": "T4OUT",
"type": "output",
"description": "Transmitter 4 RS-232 output, typically ±5.5 V, with ±15 kV ESD protection."
},
{
"number": "19",
"name": "T3OUT",
"type": "output",
"description": "Transmitter 3 RS-232 output, typically ±5.5 V, with ±15 kV ESD protection."
},
{
"number": "20",
"name": "T2OUT",
"type": "output",
"description": "Transmitter 2 RS-232 output, typically ±5.5 V, with ±15 kV ESD protection."
},
{
"number": "21",
"name": "T1OUT",
"type": "output",
"description": "Transmitter 1 RS-232 output, typically ±5.5 V, with ±15 kV ESD protection."
},
{
"number": "22",
"name": "GND",
"type": "power_in",
"description": "Ground pin, must be connected to 0 V."
},
{
"number": "23",
"name": "GND",
"type": "power_in",
"description": "Ground pin, must be connected to 0 V."
},
{
"number": "24",
"name": "V-",
"type": "power_out",
"description": "Internally generated negative supply of -7.25 V, with capacitor C5 connected between GND and V-."
},
{
"number": "25",
"name": "C3-",
"type": "passive",
"description": "Negative terminal of external charge pump capacitor C3, 0.1 µF recommended and up to 1 µF."
},
{
"number": "26",
"name": "C1+",
"type": "passive",
"description": "Positive terminal of external charge pump capacitor C1, 0.1 µF recommended and up to 1 µF."
},
{
"number": "27",
"name": "C3+",
"type": "passive",
"description": "Positive terminal of external charge pump capacitor C3, 0.1 µF recommended and up to 1 µF."
},
{
"number": "28",
"name": "C2+",
"type": "passive",
"description": "Positive terminal of external charge pump capacitor C2, 0.1 µF recommended and up to 1 µF."
},
{
"number": "29",
"name": "V+",
"type": "power_out",
"description": "Internally generated positive supply of 7.25 V, with capacitor C4 connected between VCC and V+."
},
{
"number": "30",
"name": "VCC",
"type": "power_in",
"description": "Power supply input, 2.7 V to 3.6 V."
},
{
"number": "31",
"name": "C2-",
"type": "passive",
"description": "Negative terminal of external charge pump capacitor C2, 0.1 µF recommended and up to 1 µF."
},
{
"number": "32",
"name": "C1-",
"type": "passive",
"description": "Negative terminal of external charge pump capacitor C1, 0.1 µF recommended and up to 1 µF."
},
{
"number": "33",
"name": "EP",
"type": "power_in",
"description": "Exposed pad, connected to ground."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-sonnet-5-5",
"primary_mode": "text+vision",
"consensus_model": "claude-opus-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The exposed pad has no printed pin number. '33' is a placeholder, and the datasheet only says the pa; The datasheet text describes V- as 'Positive Supply', which looks like a typo. I used the negative s; EN is drawn with an overbar in the figure, but the text says a high level three-states the receivers",
"vision extraction: provenance cannot be text-verified; needs consensus"
],
"pages_sent": 20,
"cost_usd": 0.5531,
"at": "2026-10-30T20:56:47"
},
"datasheet": {
"url": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADM3307E_3310E_3311E_3312E_3315E.pdf",
"pages": 20,
"sha256": "19555870393bbfda",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 33,
"described": 33,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "adm3307eacpz.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5.0,
5.0,
0.875
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",
"checked": "2026-11-12",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "adm3307eacpz-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5.0,
5.0,
0.875
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "1f1665ec8bd6d9b257cf7ee6768e897e783af056e356a14b5c01af2e572249a8",
"checked": "2026-11-12",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}