main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers adm3307eacpz: viewers rendered from the public page · Ray
adm3307eacpz-etched.glb adm3307eacpz: factory component page (tier=mfr) · Ray
adm3307eacpz-etched.step adm3307eacpz: factory component page (tier=mfr) · Ray
adm3307eacpz-hero.glb adm3307eacpz: hero GLB from the etched model (keeps the MPN mark) · Ray
adm3307eacpz-hero.overlay.json adm3307eacpz: hero GLB from the etched model (keeps the MPN mark) · Ray
adm3307eacpz.glb Publish 0.1.0 · Ray
adm3307eacpz.kicad_mod Publish 0.1.0 · Ray
adm3307eacpz.kicad_sym Publish 0.1.0 · Ray
adm3307eacpz.lbr Publish 0.1.0 · Ray
adm3307eacpz.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 33 pins · Ray

ADM3307EACPZ

Analog Devices · RS232 ICs · LFCSP-32(5x5)

ADM3307EACPZ from Analog Devices, in a LFCSP-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Receiver enable; a high level three-states all receiver outputs, with ±15 kV ESD protection on the ADM3307E.
2 SD input Shutdown control; a high level disables the charge pump and transmitters and cuts quiescent current to less than 1 µA, with ROUT3 remaining active.
3 NC unconnected No connect; do not connect to this pin.
4 T1IN input Transmitter 1 input accepting TTL/CMOS levels, with an internal 400 kΩ pull-up resistor to VCC.
5 T2IN input Transmitter 2 input accepting TTL/CMOS levels, with an internal 400 kΩ pull-up resistor to VCC.
6 T3IN input Transmitter 3 input accepting TTL/CMOS levels, with an internal 400 kΩ pull-up resistor to VCC.
7 T4IN input Transmitter 4 input accepting TTL/CMOS levels, with an internal 400 kΩ pull-up resistor to VCC.
8 T5IN input Transmitter 5 input accepting TTL/CMOS levels, with an internal 400 kΩ pull-up resistor to VCC.
9 NC unconnected No connect; do not connect to this pin.
10 R1OUT output Receiver 1 output at TTL/CMOS levels, three-stated when EN is high.
11 R2OUT output Receiver 2 output at TTL/CMOS levels, three-stated when EN is high.
12 R3OUT output Receiver 3 output at TTL/CMOS levels, which stays active in shutdown when EN is low.
13 NC unconnected No connect; do not connect to this pin.
14 R3IN input Receiver 3 input accepting RS-232 levels (±25 V range), with an internal 5 kΩ pull-down to GND.
15 R2IN input Receiver 2 input accepting RS-232 levels (±25 V range), with an internal 5 kΩ pull-down to GND.
16 R1IN input Receiver 1 input accepting RS-232 levels (±25 V range), with an internal 5 kΩ pull-down to GND.
17 T5OUT output Transmitter 5 RS-232 output, typically ±5.5 V, with ±15 kV ESD protection.
18 T4OUT output Transmitter 4 RS-232 output, typically ±5.5 V, with ±15 kV ESD protection.
19 T3OUT output Transmitter 3 RS-232 output, typically ±5.5 V, with ±15 kV ESD protection.
20 T2OUT output Transmitter 2 RS-232 output, typically ±5.5 V, with ±15 kV ESD protection.
21 T1OUT output Transmitter 1 RS-232 output, typically ±5.5 V, with ±15 kV ESD protection.
22 GND power_in Ground pin, must be connected to 0 V.
23 GND power_in Ground pin, must be connected to 0 V.
24 V- power_out Internally generated negative supply of -7.25 V, with capacitor C5 connected between GND and V-.
25 C3- passive Negative terminal of external charge pump capacitor C3, 0.1 µF recommended and up to 1 µF.
26 C1+ passive Positive terminal of external charge pump capacitor C1, 0.1 µF recommended and up to 1 µF.
27 C3+ passive Positive terminal of external charge pump capacitor C3, 0.1 µF recommended and up to 1 µF.
28 C2+ passive Positive terminal of external charge pump capacitor C2, 0.1 µF recommended and up to 1 µF.
29 V+ power_out Internally generated positive supply of 7.25 V, with capacitor C4 connected between VCC and V+.
30 VCC power_in Power supply input, 2.7 V to 3.6 V.
31 C2- passive Negative terminal of external charge pump capacitor C2, 0.1 µF recommended and up to 1 µF.
32 C1- passive Negative terminal of external charge pump capacitor C1, 0.1 µF recommended and up to 1 µF.
33 EP power_in Exposed pad, connected to ground.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package LFCSP-32(5x5)
Category Communication Interface Chip/UART/485/232
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Temperature Range (Industrial, A Version) -40 85 °C 6
Supply Voltage VCC (operating) VCC 2.7 3.6 V Single supply 9
VCC VCC -0.3 4 V TA = 25°C 6
V+ V+ 9 V (VCC − 0.3 V) to +9 V 6
V− V− -9 V +0.3 V to −9 V 6
Input Voltage TIN TIN -0.3 6 V 6
Input Voltage RIN RIN -30 30 V 6
Output Voltage TOUT TOUT -15 15 V 6
Output Voltage ROUT ROUT -0.3 V −0.3 V to (VCC + 0.3 V) 6
Storage Temperature Range -65 150 °C 6
Lead Temperature (Soldering) 300 °C 10 sec 6
ESD Rating IEC 1000-4-2 Air (RS-232 I/Os) -15 15 kV 6
ESD Rating IEC 1000-4-2 Contact (RS-232 I/Os) -8 8 kV 6
Thermal Impedance θJA, LFCSP_WQ (CP-32-7) θJA 32.5 °C/W 6
Maximum Data Rate (ADM3307E, VCC = 2.7 V) 250 720 kbps RL = 3 kΩ to 7 kΩ, CL = 50 pF to 1000 pF, VCC = 2.7 V 5
Maximum Data Rate (ADM3307E, VCC = 3.0 V) 460 920 kbps RL = 3 kΩ to 7 kΩ, CL = 50 pF to 1000 pF, VCC = 3.0 V 5
Receiver Propagation Delay TPHL, TPLH 0.3 µs CL = 150 pF 5
Receiver Propagation Delay (ADM3307E only) TPHL, TPLH 0.17 1 µs CL = 150 pF; ADM3307E only 5
Receiver Output Enable Time tER 100 ns 5
Receiver Output Disable Time tDR 300 ns 5
Transmitter Propagation Delay TPHL, TPLH 500 ns RL = 3 kΩ, CL = 1000 pF 5
Transition Region Slew Rate 3 18 V/µs RL = 3 kΩ, CL = 50 pF to 1000 pF; measured at +3 V to −3 V or −3 V to +3 V 5
ESD Protection (I/O pins), Human body model -15 15 kV Human body model 5
ESD Protection (I/O pins), IEC 1000-4-2 air discharge -15 15 kV IEC 1000-4-2 air discharge 5
ESD Protection (I/O pins), IEC 1000-4-2 contact discharge -8 8 kV IEC 1000-4-2 contact discharge; includes CMOS I/O, SD, and EN for ADM3307E 5
Maximum ICC (supply current) ICC 1.5 mA Product selection guide, ADM3307E 7

CAD (KiCad official)

  • Symbol: ADM3307EACPZ
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: LFCSP-32(5x5) (KiCad packages3D, STEP)
  • 3D model files: adm3307eacpz-etched.step / adm3307eacpz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); adm3307eacpz.step / adm3307eacpz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (20 pp, sha256 19555870393bbfda, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF