main
Ray Publish 0.1.0 d2dff71
{
  "slug": "adm3101earqz",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices RS232 ICs, SSOP-16-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "communication interface chip-uart-485-232",
    "adm3101earqz",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "adm3101earqz.kicad_sym",
    "adm3101earqz.kicad_mod",
    "adm3101earqz.glb",
    "adm3101earqz.step",
    "adm3101earqz.lbr",
    "docs/hero.png",
    "docs/adm3101earqz-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "adm3101earqz-hero.glb",
    "adm3101earqz-hero.overlay.json"
  ],
  "component": {
    "mpn": "ADM3101EARQZ",
    "manufacturer": "Analog Devices",
    "package": "SSOP-16-150mil",
    "pin_count": 16,
    "category": "Communication Interface Chip/UART/485/232",
    "subcategory": "RS232 ICs",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADM3101E.pdf",
    "parts": {
      "symbol": "adm3101earqz.kicad_sym",
      "footprint": "adm3101earqz.kicad_mod",
      "model_3d": "adm3101earqz-hero.glb",
      "model_3d_plain": "adm3101earqz.glb",
      "model_3d_step": "adm3101earqz-etched.step",
      "model_3d_step_plain": "adm3101earqz.step",
      "lbr": "adm3101earqz.lbr"
    },
    "distributor_links": {
      "lcsc": "C459699",
      "digikey": "505-ADM3101EARQZ-ND",
      "mouser": "584-ADM3101EARQZ"
    },
    "distributor_check": {
      "checked_at": "2026-11-13T09:40:49Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-ADM3101EARQZ-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-ADM3101EARQZ",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "C1–",
        "type": "passive",
        "description": "Negative connection for charge pump capacitor C1, which is connected between C1+ and C1-; a 0.1 μF capacitor is recommended, and larger capacitors up to 10 μF can be used."
      },
      {
        "number": "2",
        "name": "C1+",
        "type": "passive",
        "description": "Positive connection for charge pump capacitor C1, which is connected between C1+ and C1-; a 0.1 μF capacitor is recommended, and larger capacitors up to 10 μF can be used."
      },
      {
        "number": "3",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect; these pins should always remain unconnected."
      },
      {
        "number": "4",
        "name": "ROUT",
        "type": "output",
        "description": "Receiver output that outputs CMOS output logic levels."
      },
      {
        "number": "5",
        "name": "TIN",
        "type": "input",
        "description": "Transmitter (driver) input that accepts TTL/CMOS levels."
      },
      {
        "number": "6",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect; these pins should always remain unconnected."
      },
      {
        "number": "7",
        "name": "V+",
        "type": "power_out",
        "description": "Internally generated positive supply, +6 V nominal; requires the external charge pump capacitors."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply input, 3.0 V to 5.5 V."
      },
      {
        "number": "9",
        "name": "GND",
        "type": "power_in",
        "description": "Ground; must be connected to 0 V."
      },
      {
        "number": "10",
        "name": "V–",
        "type": "power_out",
        "description": "Internally generated negative supply, −6 V nominal."
      },
      {
        "number": "11",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect; these pins should always remain unconnected."
      },
      {
        "number": "12",
        "name": "TOUT",
        "type": "output",
        "description": "Transmitter (driver) output that outputs RS-232 signal levels, typically ±6 V."
      },
      {
        "number": "13",
        "name": "RIN",
        "type": "input",
        "description": "Receiver input that accepts RS-232 signal levels, with an internal 5 kΩ pull-down resistor to GND on the input."
      },
      {
        "number": "14",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect; these pins should always remain unconnected."
      },
      {
        "number": "15",
        "name": "C2–",
        "type": "passive",
        "description": "Negative connection for charge pump capacitor C2, which is connected between C2+ and C2-; a 0.1 μF capacitor is recommended, and larger capacitors up to 10 μF can be used."
      },
      {
        "number": "16",
        "name": "C2+",
        "type": "passive",
        "description": "Positive connection for charge pump capacitor C2, which is connected between C2+ and C2-; a 0.1 μF capacitor is recommended, and larger capacitors up to 10 μF can be used."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Package naming: the hint says SSOP-16-150mil, but the datasheet calls this package the 16-lead QSOP ; Pin-number conflict in the datasheet: Figure 3 (QSOP top view) places the labels at different pin nu"
        ],
        "pages_sent": 12,
        "cost_usd": 0.005,
        "at": "2026-11-13T09:40:41"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADM3101E.pdf",
        "pages": 12,
        "sha256": "ebc7db60d7efcc7a",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "adm3101earqz.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.85
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3b55ed1c8dc3eb976cfab8b1e135fd29a17f33ebf575a8a088a30e82c9a5f2ee",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "adm3101earqz-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.85
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "37d1b0036a4287a09810695de83fbfb1fa3e7c96042548d43c7f7ed3b738d186",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}