Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ADM3101EARQZ

Analog Devices · RS232 ICs · SSOP-16-150mil

ADM3101EARQZ from Analog Devices, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C1- passive Negative connection for charge pump capacitor C1, which is connected between C1+ and C1-; a 0.1 μF capacitor is recommended, and larger capacitors up to 10 μF can be used.
2 C1+ passive Positive connection for charge pump capacitor C1, which is connected between C1+ and C1-; a 0.1 μF capacitor is recommended, and larger capacitors up to 10 μF can be used.
3 NC unconnected No connect; these pins should always remain unconnected.
4 ROUT output Receiver output that outputs CMOS output logic levels.
5 TIN input Transmitter (driver) input that accepts TTL/CMOS levels.
6 NC unconnected No connect; these pins should always remain unconnected.
7 V+ power_out Internally generated positive supply, +6 V nominal; requires the external charge pump capacitors.
8 VCC power_in Power supply input, 3.0 V to 5.5 V.
9 GND power_in Ground; must be connected to 0 V.
10 V- power_out Internally generated negative supply, −6 V nominal.
11 NC unconnected No connect; these pins should always remain unconnected.
12 TOUT output Transmitter (driver) output that outputs RS-232 signal levels, typically ±6 V.
13 RIN input Receiver input that accepts RS-232 signal levels, with an internal 5 kΩ pull-down resistor to GND on the input.
14 NC unconnected No connect; these pins should always remain unconnected.
15 C2- passive Negative connection for charge pump capacitor C2, which is connected between C2+ and C2-; a 0.1 μF capacitor is recommended, and larger capacitors up to 10 μF can be used.
16 C2+ passive Positive connection for charge pump capacitor C2, which is connected between C2+ and C2-; a 0.1 μF capacitor is recommended, and larger capacitors up to 10 μF can be used.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SSOP-16-150mil
Category Communication Interface Chip/UART/485/232
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Voltage Range 3 3.3 5.5 V 3
Power Supply Current, VCC 1.5 2.6 mA No load 3
Power Supply Current, VCC 5 7 mA RL = 3 kΩ to GND 3
Input Logic Threshold Low VINL 0.6 V TIN 3
Input Logic Threshold High VINH 1.4 V TIN 3
Input Logic Threshold Low VINL 0.8 V TIN, VCC = 5.0 V ± 0.5 V 3
Input Logic Threshold High VINH 2 V TIN, VCC = 5.0 V ± 0.5 V 3
CMOS Output Voltage Low VOL 0.4 V IOUT = 1.6 mA 3
Logic Pull-Up Current 5 12 μA TIN = GND to VCC 3
EIA/TIA-232E Input Voltage Range -30 30 V 3
EIA/TIA-232E Input Threshold Low 0.6 1.3 V VCC = 3.0 V to 5.5 V 3
EIA/TIA-232E Input Threshold High 1.6 2.4 V 3
EIA/TIA-232E Input Hysteresis 0.4 V 3
EIA/TIA-232E Input Resistance 3 5 7 kΩ 3
Output Voltage Swing, RS-232 5 5.7 V VCC = 3.3 V to 5.5 V; transmitter output loaded with 3 kΩ to ground 3
Output Voltage Swing, RS-562 4.5 V VCC = 3.0 V 3
Transmitter Output Resistance 300 Ω VCC = 0 V, VOUT = ±2 V 3
RS-232 Output Short-Circuit Current -15 15 mA 3
Maximum Data Rate 460 kbps VCC = 3.3 V, RL = 3 kΩ to 7 kΩ, CL = 50 pF to 1000 pF 3
Receiver Propagation Delay tPHL tPHL 0.4 μs 3
Receiver Propagation Delay tPLH tPLH 0.4 μs 3
Transmitter Propagation Delay 600 ns RL = 3 kΩ, CL = 1000 pF 3
Transmitter Skew 80 ns 3
Receiver Skew 70 ns 3
Transition Region Slew Rate 5.5 10 30 V/μs +3 V to −3 V or −3 V to +3 V, VCC = +3.3 V, RL = 3 kΩ, CL = 1000 pF, TA = 25°C 3
ESD Protection, RS-232 and CMOS I/O Pins, air discharge -15 15 kV Human body model air discharge 3
ESD Protection, RS-232 and CMOS I/O Pins, contact discharge -8 8 kV Human body model contact discharge 3
VCC Supply Voltage VCC -0.3 6 V 4
V+ Supply Voltage V+ 13 V 4
V− Supply Voltage V− -13 0.3 V 4
TIN Input Voltage -0.3 V 4
RIN Input Voltage -30 30 V 4
TOUT Output Voltage -15 15 V 4
ROUT Output Voltage -0.3 V 4
Thermal Impedance, θJA (QSOP) θJA 149.97 °C/W 4
Operating Temperature Range, Industrial (A Version) -40 85 °C 4
Storage Temperature Range -65 150 °C 4
Pb-Free Temperature (Soldering) 260 °C 10 sec 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin 2 4 ROUT Receiver Output. This pin outputs CMOS output logic levels. 3 5 TIN Transmitter (Driver) Input. This input accepts TTL/CMOS levels. 5

CAD (KiCad official)

  • Symbol: ADM3101EARQZ
  • Footprint: Package_SO:SSOP-16_3.9x4.9mm_P0.635mm
  • 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
  • 3D model files: adm3101earqz-etched.step / adm3101earqz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); adm3101earqz.step / adm3101earqz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (12 pp, sha256 ebc7db60d7efcc7a, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF