Generated by kicad-footprint-generator · KiCad file format 20260206
ADM3101EARQZ
Analog Devices · RS232 ICs · SSOP-16-150mil
ADM3101EARQZ from Analog Devices, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1- | passive | Negative connection for charge pump capacitor C1, which is connected between C1+ and C1-; a 0.1 μF capacitor is recommended, and larger capacitors up to 10 μF can be used. |
| 2 | C1+ | passive | Positive connection for charge pump capacitor C1, which is connected between C1+ and C1-; a 0.1 μF capacitor is recommended, and larger capacitors up to 10 μF can be used. |
| 3 | NC | unconnected | No connect; these pins should always remain unconnected. |
| 4 | ROUT | output | Receiver output that outputs CMOS output logic levels. |
| 5 | TIN | input | Transmitter (driver) input that accepts TTL/CMOS levels. |
| 6 | NC | unconnected | No connect; these pins should always remain unconnected. |
| 7 | V+ | power_out | Internally generated positive supply, +6 V nominal; requires the external charge pump capacitors. |
| 8 | VCC | power_in | Power supply input, 3.0 V to 5.5 V. |
| 9 | GND | power_in | Ground; must be connected to 0 V. |
| 10 | V- | power_out | Internally generated negative supply, −6 V nominal. |
| 11 | NC | unconnected | No connect; these pins should always remain unconnected. |
| 12 | TOUT | output | Transmitter (driver) output that outputs RS-232 signal levels, typically ±6 V. |
| 13 | RIN | input | Receiver input that accepts RS-232 signal levels, with an internal 5 kΩ pull-down resistor to GND on the input. |
| 14 | NC | unconnected | No connect; these pins should always remain unconnected. |
| 15 | C2- | passive | Negative connection for charge pump capacitor C2, which is connected between C2+ and C2-; a 0.1 μF capacitor is recommended, and larger capacitors up to 10 μF can be used. |
| 16 | C2+ | passive | Positive connection for charge pump capacitor C2, which is connected between C2+ and C2-; a 0.1 μF capacitor is recommended, and larger capacitors up to 10 μF can be used. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SSOP-16-150mil |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | 3 | 3.3 | 5.5 | V | 3 | ||
| Power Supply Current, VCC | 1.5 | 2.6 | mA | No load | 3 | ||
| Power Supply Current, VCC | 5 | 7 | mA | RL = 3 kΩ to GND | 3 | ||
| Input Logic Threshold Low | VINL | 0.6 | V | TIN | 3 | ||
| Input Logic Threshold High | VINH | 1.4 | V | TIN | 3 | ||
| Input Logic Threshold Low | VINL | 0.8 | V | TIN, VCC = 5.0 V ± 0.5 V | 3 | ||
| Input Logic Threshold High | VINH | 2 | V | TIN, VCC = 5.0 V ± 0.5 V | 3 | ||
| CMOS Output Voltage Low | VOL | 0.4 | V | IOUT = 1.6 mA | 3 | ||
| Logic Pull-Up Current | 5 | 12 | μA | TIN = GND to VCC | 3 | ||
| EIA/TIA-232E Input Voltage Range | -30 | 30 | V | 3 | |||
| EIA/TIA-232E Input Threshold Low | 0.6 | 1.3 | V | VCC = 3.0 V to 5.5 V | 3 | ||
| EIA/TIA-232E Input Threshold High | 1.6 | 2.4 | V | 3 | |||
| EIA/TIA-232E Input Hysteresis | 0.4 | V | 3 | ||||
| EIA/TIA-232E Input Resistance | 3 | 5 | 7 | kΩ | 3 | ||
| Output Voltage Swing, RS-232 | 5 | 5.7 | V | VCC = 3.3 V to 5.5 V; transmitter output loaded with 3 kΩ to ground | 3 | ||
| Output Voltage Swing, RS-562 | 4.5 | V | VCC = 3.0 V | 3 | |||
| Transmitter Output Resistance | 300 | Ω | VCC = 0 V, VOUT = ±2 V | 3 | |||
| RS-232 Output Short-Circuit Current | -15 | 15 | mA | 3 | |||
| Maximum Data Rate | 460 | kbps | VCC = 3.3 V, RL = 3 kΩ to 7 kΩ, CL = 50 pF to 1000 pF | 3 | |||
| Receiver Propagation Delay tPHL | tPHL | 0.4 | μs | 3 | |||
| Receiver Propagation Delay tPLH | tPLH | 0.4 | μs | 3 | |||
| Transmitter Propagation Delay | 600 | ns | RL = 3 kΩ, CL = 1000 pF | 3 | |||
| Transmitter Skew | 80 | ns | 3 | ||||
| Receiver Skew | 70 | ns | 3 | ||||
| Transition Region Slew Rate | 5.5 | 10 | 30 | V/μs | +3 V to −3 V or −3 V to +3 V, VCC = +3.3 V, RL = 3 kΩ, CL = 1000 pF, TA = 25°C | 3 | |
| ESD Protection, RS-232 and CMOS I/O Pins, air discharge | -15 | 15 | kV | Human body model air discharge | 3 | ||
| ESD Protection, RS-232 and CMOS I/O Pins, contact discharge | -8 | 8 | kV | Human body model contact discharge | 3 | ||
| VCC Supply Voltage | VCC | -0.3 | 6 | V | 4 | ||
| V+ Supply Voltage | V+ | 13 | V | 4 | |||
| V− Supply Voltage | V− | -13 | 0.3 | V | 4 | ||
| TIN Input Voltage | -0.3 | V | 4 | ||||
| RIN Input Voltage | -30 | 30 | V | 4 | |||
| TOUT Output Voltage | -15 | 15 | V | 4 | |||
| ROUT Output Voltage | -0.3 | V | 4 | ||||
| Thermal Impedance, θJA (QSOP) | θJA | 149.97 | °C/W | 4 | |||
| Operating Temperature Range, Industrial (A Version) | -40 | 85 | °C | 4 | |||
| Storage Temperature Range | -65 | 150 | °C | 4 | |||
| Pb-Free Temperature (Soldering) | 260 | °C | 10 sec | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | 2 4 ROUT Receiver Output. This pin outputs CMOS output logic levels. 3 5 TIN Transmitter (Driver) Input. This input accepts TTL/CMOS levels. | 5 |
CAD (KiCad official)
- Symbol:
ADM3101EARQZ - Footprint:
Package_SO:SSOP-16_3.9x4.9mm_P0.635mm - 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
- 3D model files:
adm3101earqz-etched.step/adm3101earqz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adm3101earqz.step/adm3101earqz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (12 pp, sha256
ebc7db60d7efcc7a, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).