Generated by kicad-footprint-generator · KiCad file format 20260206
ADF5902WCCPZ
Analog Devices · RF Transceiver ICs · LFCSP-32-EP(5x5)
ADF5902WCCPZ from Analog Devices, in a LFCSP-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | RF ground; all GND pins must be tied together. |
| 2 | TXOUT1 | output | 24 GHz transmitter output 1, rated 2 dBm minimum, 8 dBm typical and 12 dBm maximum output power into 50 Ω. |
| 3 | GND | power_in | RF ground; all GND pins must be tied together. |
| 4 | TX_AHI | power_in | Voltage supply for the transmitter section, 3.135 V to 3.465 V, must be the same value as AHI, with 0.1 µF, 1 nF and 10 pF decoupling placed close to the pin. |
| 5 | TX_AHI | power_in | Voltage supply for the transmitter section, 3.135 V to 3.465 V, must be the same value as AHI, with 0.1 µF, 1 nF and 10 pF decoupling placed close to the pin. |
| 6 | GND | power_in | RF ground; all GND pins must be tied together. |
| 7 | TXOUT2 | output | 24 GHz transmitter output 2, rated 2 dBm minimum, 8 dBm typical and 12 dBm maximum output power into 50 Ω. |
| 8 | GND | power_in | RF ground; all GND pins must be tied together. |
| 9 | ATEST | output | Analog test output pin. |
| 10 | GND | power_in | RF ground; all GND pins must be tied together. |
| 11 | LOOUT | output | LO output with output power from −7 dBm to +5 dBm (−1 dBm typical) into 50 Ω. |
| 12 | GND | power_in | RF ground; all GND pins must be tied together. |
| 13 | GND | power_in | RF ground; all GND pins must be tied together. |
| 14 | RF_AHI | power_in | Voltage supply for the RF section, must be the same value as AHI, with 0.1 µF, 1 nF and 10 pF decoupling placed close to the pin. |
| 15 | REFIN | input | CMOS reference input with a nominal threshold of DVDD/2 and a dc equivalent input resistance of 100 kΩ; it can be driven from a TTL or CMOS crystal oscillator or ac-coupled. |
| 16 | AHI | power_in | Voltage supply for the analog section, 3.135 V to 3.465 V, with 0.1 µF, 1 nF and 10 pF decoupling placed close to the pin. |
| 17 | DVDD | power_in | Digital power supply, 3.135 V to 3.465 V, must be the same value as AHI, with 0.1 µF, 1 nF and 10 pF decoupling placed close to the pin. |
| 18 | VREG | power_out | Internal 1.8 V regulator output; connect a 220 nF capacitor to ground as close as possible to this pin. |
| 19 | TX_DATA | input | Transmit data pin that controls part of the ramping functionality; its rising edge must be synchronized to the rising edge of REFIN. |
| 20 | CE | input | Chip enable; a logic low powers down the device and a logic high powers it up. |
| 21 | CLK | input | Serial clock input that clocks serial data into the 32-bit shift register on its rising edge; high impedance CMOS input. |
| 22 | DATA | input | Serial data input, loaded MSB first with the four LSBs as control bits; high impedance CMOS input. |
| 23 | LE | input | Load enable CMOS input; when LE goes high, the shift register data is loaded into one of the 18 latches selected by the control bits. |
| 24 | DOUT | output | Serial data output. |
| 25 | MUXOUT | output | Multiplexer output that allows various internal signals to be accessed externally. |
| 26 | RSET | passive | Resistor setting pin; a 5.1 kΩ resistor from this pin to GND sets the internal current, with a nominal voltage of 0.62 V at the pin. |
| 27 | CP_AHI | power_in | Charge pump power supply, 3.135 V to 3.465 V, must be the same value as AHI, with 0.1 µF, 1 nF and 10 pF decoupling placed close to the pin. |
| 28 | CPOUT | output | Charge pump output that provides ±ICP to the external loop filter when the charge pump is enabled, which in turn drives the VCO. |
| 29 | VTUNE | input | Control input to the VCO that determines the output frequency; the specified VTUNE range is 0.5 V to 2.5 V. |
| 30 | VCO_AHI | power_in | Voltage supply for the VCO section, must be the same value as AHI, with 0.1 µF, 1 nF and 10 pF decoupling placed close to the pin. |
| 31 | C1 | passive | Decoupling capacitor 1; place a 47 nF capacitor to ground as close as possible to this pin. |
| 32 | C2 | passive | Decoupling capacitor 2; place a 220 nF capacitor to ground as close as possible to this pin. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | LFCSP-32-EP(5x5) |
| Category | Radio Frequency Chip/Antenna |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| RF Frequency Range | 24 | 24.25 | GHz | 3 | |||
| VTUNE control voltage range | VTUNE | 0.5 | 2.5 | V | 3 | ||
| Static pulling VCO frequency change vs. load | -2 | 2 | MHz | Open-loop into 2:1 VSWR load | 3 | ||
| Dynamic pulling transmitter on/off switch change | -10 | 10 | MHz | Open-loop | 3 | ||
| Dynamic pulling transmitter to transmitter switch change | -5 | 5 | MHz | Open-loop | 3 | ||
| Pushing fVCO change vs. AHI change | -5 | 5 | MHz/V | Open-loop | 3 | ||
| Spurious level nonharmonics | -70 | dBc | 3 | ||||
| Supply voltage AHI, TX_AHI, RF_AHI, VCO_AHI, DVDD, CP_AHI | 3.135 | 3.3 | 3.465 | V | 3 | ||
| Transmitter output power | 2 | 8 | 12 | dBm | 3 | ||
| LO output power | -7 | -1 | 5 | dBm | 3 | ||
| RSET range | RSET | 5.049 | 5.1 | 5.151 | kΩ | 3 | |
| Temperature sensor analog accuracy | -5 | 5 | °C | Following one point calibration | 4 | ||
| Temperature sensor digital accuracy | -5 | 5 | °C | Following one point calibration | 4 | ||
| ADC integral nonlinearity (INL) | INL | -1 | 1 | LSB | 4 | ||
| ADC differential nonlinearity (DNL) | DNL | -1 | 1 | LSB | 4 | ||
| REFIN input frequency | 10 | 260 | MHz | −5 dBm minimum to +9 dBm maximum, biased at AHI/2 | 4 | ||
| REFIN input current | -100 | 100 | µA | 4 | |||
| Logic input voltage high | VIH | 1.4 | V | 4 | |||
| Logic input voltage low | VIL | 0.6 | V | 4 | |||
| Logic input current | IINH, IINL | -1 | 1 | µA | 4 | ||
| Logic output voltage low | VOL | 0.4 | V | 4 | |||
| LE setup time | t1 | 20 | ns | TMIN to TMAX | 5 | ||
| DATA to CLK setup time | t2 | 10 | ns | TMIN to TMAX | 5 | ||
| DATA to CLK hold time | t3 | 10 | ns | TMIN to TMAX | 5 | ||
| CLK high duration | t4 | 25 | ns | TMIN to TMAX | 5 | ||
| CLK low duration | t5 | 25 | ns | TMIN to TMAX | 5 | ||
| CLK to LE setup time | t6 | 10 | ns | TMIN to TMAX | 5 | ||
| LE pulse width | t7 | 20 | ns | TMIN to TMAX | 5 | ||
| LE setup time to DOUT | t8 | 10 | ns | TMIN to TMAX | 5 | ||
| CLK setup time to DOUT | t9 | 15 | ns | TMIN to TMAX | 5 | ||
| AHI to GND | -0.3 | 3.9 | V | 6 | |||
| AHI to TX_AHI | -0.3 | 0.3 | V | 6 | |||
| AHI to RF_AHI | -0.3 | 0.3 | V | 6 | |||
| AHI to VCO_AHI | -0.3 | 0.3 | V | 6 | |||
| AHI to DVDD | -0.3 | 0.3 | V | 6 | |||
| AHI to CP_AHI | -0.3 | 0.3 | V | 6 | |||
| VTUNE to GND | VTUNE | -0.3 | 3.6 | V | 6 | ||
| Digital input/output voltage to GND | -0.3 | V | 6 | ||||
| Operating temperature range | TA | -40 | 105 | °C | 3 | ||
| Storage temperature range | -65 | 150 | °C | 6 | |||
| Maximum junction temperature | 150 | °C | 6 | ||||
| Reflow soldering peak temperature | 260 | °C | 6 | ||||
| Time at peak reflow temperature | 40 | sec | 6 | ||||
| Electrostatic discharge, charged device model (CDM) | 250 | V | 6 | ||||
| Electrostatic discharge, human body model (HBM) | 2000 | V | 6 | ||||
| Junction-to-ambient thermal resistance, CP-32-12 | θJA | 48.18 | °C/W | Natural convection, one cubic foot sealed enclosure; thermal pad soldered to GND | 6 | ||
| Junction-to-case thermal resistance, CP-32-12 | θJC | 26.86 | °C/W | Junction-to-case | 6 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | Human Body Model (HBM) 2000 V Stresses at or above those listed under Absolute Maximum | 6 |
CAD (KiCad official)
- Symbol:
ADF5902WCCPZ - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: LFCSP-32-EP(5x5), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
adf5902wccpz-etched.step/adf5902wccpz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adf5902wccpz.step/adf5902wccpz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (39 pp, sha256
4ba61aae9a422f2b, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).