main
History Download
Ray Publish 0.1.0 a71e022

ADF5902WCCPZ

Analog Devices · RF Transceiver ICs · LFCSP-32-EP(5x5)

ADF5902WCCPZ from Analog Devices, in a LFCSP-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in RF ground; all GND pins must be tied together.
2 TXOUT1 output 24 GHz transmitter output 1, rated 2 dBm minimum, 8 dBm typical and 12 dBm maximum output power into 50 Ω.
3 GND power_in RF ground; all GND pins must be tied together.
4 TX_AHI power_in Voltage supply for the transmitter section, 3.135 V to 3.465 V, must be the same value as AHI, with 0.1 µF, 1 nF and 10 pF decoupling placed close to the pin.
5 TX_AHI power_in Voltage supply for the transmitter section, 3.135 V to 3.465 V, must be the same value as AHI, with 0.1 µF, 1 nF and 10 pF decoupling placed close to the pin.
6 GND power_in RF ground; all GND pins must be tied together.
7 TXOUT2 output 24 GHz transmitter output 2, rated 2 dBm minimum, 8 dBm typical and 12 dBm maximum output power into 50 Ω.
8 GND power_in RF ground; all GND pins must be tied together.
9 ATEST output Analog test output pin.
10 GND power_in RF ground; all GND pins must be tied together.
11 LOOUT output LO output with output power from −7 dBm to +5 dBm (−1 dBm typical) into 50 Ω.
12 GND power_in RF ground; all GND pins must be tied together.
13 GND power_in RF ground; all GND pins must be tied together.
14 RF_AHI power_in Voltage supply for the RF section, must be the same value as AHI, with 0.1 µF, 1 nF and 10 pF decoupling placed close to the pin.
15 REFIN input CMOS reference input with a nominal threshold of DVDD/2 and a dc equivalent input resistance of 100 kΩ; it can be driven from a TTL or CMOS crystal oscillator or ac-coupled.
16 AHI power_in Voltage supply for the analog section, 3.135 V to 3.465 V, with 0.1 µF, 1 nF and 10 pF decoupling placed close to the pin.
17 DVDD power_in Digital power supply, 3.135 V to 3.465 V, must be the same value as AHI, with 0.1 µF, 1 nF and 10 pF decoupling placed close to the pin.
18 VREG power_out Internal 1.8 V regulator output; connect a 220 nF capacitor to ground as close as possible to this pin.
19 TX_DATA input Transmit data pin that controls part of the ramping functionality; its rising edge must be synchronized to the rising edge of REFIN.
20 CE input Chip enable; a logic low powers down the device and a logic high powers it up.
21 CLK input Serial clock input that clocks serial data into the 32-bit shift register on its rising edge; high impedance CMOS input.
22 DATA input Serial data input, loaded MSB first with the four LSBs as control bits; high impedance CMOS input.
23 LE input Load enable CMOS input; when LE goes high, the shift register data is loaded into one of the 18 latches selected by the control bits.
24 DOUT output Serial data output.
25 MUXOUT output Multiplexer output that allows various internal signals to be accessed externally.
26 RSET passive Resistor setting pin; a 5.1 kΩ resistor from this pin to GND sets the internal current, with a nominal voltage of 0.62 V at the pin.
27 CP_AHI power_in Charge pump power supply, 3.135 V to 3.465 V, must be the same value as AHI, with 0.1 µF, 1 nF and 10 pF decoupling placed close to the pin.
28 CPOUT output Charge pump output that provides ±ICP to the external loop filter when the charge pump is enabled, which in turn drives the VCO.
29 VTUNE input Control input to the VCO that determines the output frequency; the specified VTUNE range is 0.5 V to 2.5 V.
30 VCO_AHI power_in Voltage supply for the VCO section, must be the same value as AHI, with 0.1 µF, 1 nF and 10 pF decoupling placed close to the pin.
31 C1 passive Decoupling capacitor 1; place a 47 nF capacitor to ground as close as possible to this pin.
32 C2 passive Decoupling capacitor 2; place a 220 nF capacitor to ground as close as possible to this pin.
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Analog Devices
Package LFCSP-32-EP(5x5)
Category Radio Frequency Chip/Antenna
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
RF Frequency Range 24 24.25 GHz 3
VTUNE control voltage range VTUNE 0.5 2.5 V 3
Static pulling VCO frequency change vs. load -2 2 MHz Open-loop into 2:1 VSWR load 3
Dynamic pulling transmitter on/off switch change -10 10 MHz Open-loop 3
Dynamic pulling transmitter to transmitter switch change -5 5 MHz Open-loop 3
Pushing fVCO change vs. AHI change -5 5 MHz/V Open-loop 3
Spurious level nonharmonics -70 dBc 3
Supply voltage AHI, TX_AHI, RF_AHI, VCO_AHI, DVDD, CP_AHI 3.135 3.3 3.465 V 3
Transmitter output power 2 8 12 dBm 3
LO output power -7 -1 5 dBm 3
RSET range RSET 5.049 5.1 5.151 kΩ 3
Temperature sensor analog accuracy -5 5 °C Following one point calibration 4
Temperature sensor digital accuracy -5 5 °C Following one point calibration 4
ADC integral nonlinearity (INL) INL -1 1 LSB 4
ADC differential nonlinearity (DNL) DNL -1 1 LSB 4
REFIN input frequency 10 260 MHz −5 dBm minimum to +9 dBm maximum, biased at AHI/2 4
REFIN input current -100 100 µA 4
Logic input voltage high VIH 1.4 V 4
Logic input voltage low VIL 0.6 V 4
Logic input current IINH, IINL -1 1 µA 4
Logic output voltage low VOL 0.4 V 4
LE setup time t1 20 ns TMIN to TMAX 5
DATA to CLK setup time t2 10 ns TMIN to TMAX 5
DATA to CLK hold time t3 10 ns TMIN to TMAX 5
CLK high duration t4 25 ns TMIN to TMAX 5
CLK low duration t5 25 ns TMIN to TMAX 5
CLK to LE setup time t6 10 ns TMIN to TMAX 5
LE pulse width t7 20 ns TMIN to TMAX 5
LE setup time to DOUT t8 10 ns TMIN to TMAX 5
CLK setup time to DOUT t9 15 ns TMIN to TMAX 5
AHI to GND -0.3 3.9 V 6
AHI to TX_AHI -0.3 0.3 V 6
AHI to RF_AHI -0.3 0.3 V 6
AHI to VCO_AHI -0.3 0.3 V 6
AHI to DVDD -0.3 0.3 V 6
AHI to CP_AHI -0.3 0.3 V 6
VTUNE to GND VTUNE -0.3 3.6 V 6
Digital input/output voltage to GND -0.3 V 6
Operating temperature range TA -40 105 °C 3
Storage temperature range -65 150 °C 6
Maximum junction temperature 150 °C 6
Reflow soldering peak temperature 260 °C 6
Time at peak reflow temperature 40 sec 6
Electrostatic discharge, charged device model (CDM) 250 V 6
Electrostatic discharge, human body model (HBM) 2000 V 6
Junction-to-ambient thermal resistance, CP-32-12 θJA 48.18 °C/W Natural convection, one cubic foot sealed enclosure; thermal pad soldered to GND 6
Junction-to-case thermal resistance, CP-32-12 θJC 26.86 °C/W Junction-to-case 6

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing Abs Human Body Model (HBM) 2000 V Stresses at or above those listed under Absolute Maximum 6

CAD (KiCad official)

  • Symbol: ADF5902WCCPZ
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: LFCSP-32-EP(5x5), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: adf5902wccpz-etched.step / adf5902wccpz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); adf5902wccpz.step / adf5902wccpz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (39 pp, sha256 4ba61aae9a422f2b, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF