main
Ray
Publish 0.1.0
a71e022
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391
{
"slug": "adf5902wccpz",
"version": "0.1.0",
"type": "component",
"description": "Analog Devices RF Transceiver ICs, LFCSP-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"radio frequency chip-antenna",
"adf5902wccpz",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"adf5902wccpz.kicad_sym",
"adf5902wccpz.kicad_mod",
"adf5902wccpz.glb",
"adf5902wccpz.step",
"adf5902wccpz.lbr",
"docs/hero.png",
"docs/adf5902wccpz-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"adf5902wccpz-hero.glb",
"adf5902wccpz-hero.overlay.json"
],
"component": {
"mpn": "ADF5902WCCPZ",
"manufacturer": "Analog Devices",
"package": "LFCSP-32-EP(5x5)",
"pin_count": 33,
"category": "Radio Frequency Chip/Antenna",
"subcategory": "RF Transceiver ICs",
"datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADF5902.pdf",
"parts": {
"symbol": "adf5902wccpz.kicad_sym",
"footprint": "adf5902wccpz.kicad_mod",
"model_3d": "adf5902wccpz-hero.glb",
"model_3d_plain": "adf5902wccpz.glb",
"model_3d_step": "adf5902wccpz-etched.step",
"model_3d_step_plain": "adf5902wccpz.step",
"lbr": "adf5902wccpz.lbr"
},
"distributor_links": {
"lcsc": "C654721",
"digikey": "505-ADF5902WCCPZ-ND",
"mouser": "584-ADF5902WCCPZ"
},
"distributor_check": {
"checked_at": "2026-11-12T19:51:07Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "505-ADF5902WCCPZ-ND",
"status": "found"
},
"mouser": {
"pn": "584-ADF5902WCCPZ",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "GND",
"type": "power_in",
"description": "RF ground; all GND pins must be tied together."
},
{
"number": "2",
"name": "TXOUT1",
"type": "output",
"description": "24 GHz transmitter output 1, rated 2 dBm minimum, 8 dBm typical and 12 dBm maximum output power into 50 Ω."
},
{
"number": "3",
"name": "GND",
"type": "power_in",
"description": "RF ground; all GND pins must be tied together."
},
{
"number": "4",
"name": "TX_AHI",
"type": "power_in",
"description": "Voltage supply for the transmitter section, 3.135 V to 3.465 V, must be the same value as AHI, with 0.1 µF, 1 nF and 10 pF decoupling placed close to the pin."
},
{
"number": "5",
"name": "TX_AHI",
"type": "power_in",
"description": "Voltage supply for the transmitter section, 3.135 V to 3.465 V, must be the same value as AHI, with 0.1 µF, 1 nF and 10 pF decoupling placed close to the pin."
},
{
"number": "6",
"name": "GND",
"type": "power_in",
"description": "RF ground; all GND pins must be tied together."
},
{
"number": "7",
"name": "TXOUT2",
"type": "output",
"description": "24 GHz transmitter output 2, rated 2 dBm minimum, 8 dBm typical and 12 dBm maximum output power into 50 Ω."
},
{
"number": "8",
"name": "GND",
"type": "power_in",
"description": "RF ground; all GND pins must be tied together."
},
{
"number": "9",
"name": "ATEST",
"type": "output",
"description": "Analog test output pin."
},
{
"number": "10",
"name": "GND",
"type": "power_in",
"description": "RF ground; all GND pins must be tied together."
},
{
"number": "11",
"name": "LOOUT",
"type": "output",
"description": "LO output with output power from −7 dBm to +5 dBm (−1 dBm typical) into 50 Ω."
},
{
"number": "12",
"name": "GND",
"type": "power_in",
"description": "RF ground; all GND pins must be tied together."
},
{
"number": "13",
"name": "GND",
"type": "power_in",
"description": "RF ground; all GND pins must be tied together."
},
{
"number": "14",
"name": "RF_AHI",
"type": "power_in",
"description": "Voltage supply for the RF section, must be the same value as AHI, with 0.1 µF, 1 nF and 10 pF decoupling placed close to the pin."
},
{
"number": "15",
"name": "REFIN",
"type": "input",
"description": "CMOS reference input with a nominal threshold of DVDD/2 and a dc equivalent input resistance of 100 kΩ; it can be driven from a TTL or CMOS crystal oscillator or ac-coupled."
},
{
"number": "16",
"name": "AHI",
"type": "power_in",
"description": "Voltage supply for the analog section, 3.135 V to 3.465 V, with 0.1 µF, 1 nF and 10 pF decoupling placed close to the pin."
},
{
"number": "17",
"name": "DVDD",
"type": "power_in",
"description": "Digital power supply, 3.135 V to 3.465 V, must be the same value as AHI, with 0.1 µF, 1 nF and 10 pF decoupling placed close to the pin."
},
{
"number": "18",
"name": "VREG",
"type": "power_out",
"description": "Internal 1.8 V regulator output; connect a 220 nF capacitor to ground as close as possible to this pin."
},
{
"number": "19",
"name": "TX_DATA",
"type": "input",
"description": "Transmit data pin that controls part of the ramping functionality; its rising edge must be synchronized to the rising edge of REFIN."
},
{
"number": "20",
"name": "CE",
"type": "input",
"description": "Chip enable; a logic low powers down the device and a logic high powers it up."
},
{
"number": "21",
"name": "CLK",
"type": "input",
"description": "Serial clock input that clocks serial data into the 32-bit shift register on its rising edge; high impedance CMOS input."
},
{
"number": "22",
"name": "DATA",
"type": "input",
"description": "Serial data input, loaded MSB first with the four LSBs as control bits; high impedance CMOS input."
},
{
"number": "23",
"name": "LE",
"type": "input",
"description": "Load enable CMOS input; when LE goes high, the shift register data is loaded into one of the 18 latches selected by the control bits."
},
{
"number": "24",
"name": "DOUT",
"type": "output",
"description": "Serial data output."
},
{
"number": "25",
"name": "MUXOUT",
"type": "output",
"description": "Multiplexer output that allows various internal signals to be accessed externally."
},
{
"number": "26",
"name": "RSET",
"type": "passive",
"description": "Resistor setting pin; a 5.1 kΩ resistor from this pin to GND sets the internal current, with a nominal voltage of 0.62 V at the pin."
},
{
"number": "27",
"name": "CP_AHI",
"type": "power_in",
"description": "Charge pump power supply, 3.135 V to 3.465 V, must be the same value as AHI, with 0.1 µF, 1 nF and 10 pF decoupling placed close to the pin."
},
{
"number": "28",
"name": "CPOUT",
"type": "output",
"description": "Charge pump output that provides ±ICP to the external loop filter when the charge pump is enabled, which in turn drives the VCO."
},
{
"number": "29",
"name": "VTUNE",
"type": "input",
"description": "Control input to the VCO that determines the output frequency; the specified VTUNE range is 0.5 V to 2.5 V."
},
{
"number": "30",
"name": "VCO_AHI",
"type": "power_in",
"description": "Voltage supply for the VCO section, must be the same value as AHI, with 0.1 µF, 1 nF and 10 pF decoupling placed close to the pin."
},
{
"number": "31",
"name": "C1",
"type": "passive",
"description": "Decoupling capacitor 1; place a 47 nF capacitor to ground as close as possible to this pin."
},
{
"number": "32",
"name": "C2",
"type": "passive",
"description": "Decoupling capacitor 2; place a 220 nF capacitor to ground as close as possible to this pin."
},
{
"number": "33",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Figure 4 (pin configuration drawing) is garbled in the text extraction, so pin positions were taken ; Only 9 of 39 datasheet pages were provided. The pin table itself is complete, but the package drawin; The ordering guide lists ADF5902WCCPZ and ADF5902WCCPZ-RL7 both in package CP-32-12; the pinout is t"
],
"pages_sent": 9,
"cost_usd": 0.0049,
"at": "2026-11-12T19:50:54"
},
"datasheet": {
"url": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADF5902.pdf",
"pages": 39,
"sha256": "4ba61aae9a422f2b",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"model_3d_generated": {
"generator": "factory/gen_pkg3d.py",
"family": "QFN",
"height_mm": 0.75,
"height_basis": "datasheet A, nominal",
"standoff_mm": 0.0
},
"pins": {
"total": 33,
"described": 33,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "adf5902wccpz.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5.02,
5.02,
0.75
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "bd8ad5d5a38d9517acea8c7c347212d196d9705def7b1bba2e5d74fdbbc58378",
"checked": "2026-11-12",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "adf5902wccpz-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5.02,
5.02,
0.75
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "a3ab59282ae81d3cef1c077032d6fda8221b9487a7dca70c063ad41582b3323c",
"checked": "2026-11-12",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "CP-32-12",
"source_page": 39,
"D": {
"nom_mm": 5.0,
"range_mm": [
4.9,
5.1
]
},
"E1": {
"nom_mm": 5.0,
"range_mm": [
4.9,
5.1
]
},
"e": {
"nom_mm": 0.5,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 0.75,
"range_mm": [
0.7,
0.8
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "adf5902wccpz.step",
"verdict": "PASS",
"reasons": [
"height within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}