main
Ray Publish 0.1.3 cfbafe9
{
  "slug": "adc0804lcwmx",
  "version": "0.1.3",
  "type": "component",
  "description": "Texas Instruments Pre-ordered Chips, SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface ics",
    "adc0804lcwmx",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "adc0804lcwmx.kicad_sym",
    "adc0804lcwmx.kicad_mod",
    "adc0804lcwmx.glb",
    "adc0804lcwmx.step",
    "adc0804lcwmx.lbr",
    "docs/hero.png",
    "docs/adc0804lcwmx-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "adc0804lcwmx-hero.glb",
    "adc0804lcwmx-hero.overlay.json"
  ],
  "component": {
    "mpn": "ADC0804LCWMX",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-20-300mil",
    "pin_count": 20,
    "category": "Interface ICs",
    "subcategory": "Pre-ordered Chips",
    "datasheet": "https://www.ti.com/lit/ds/symlink/adc0804lcwmx.pdf",
    "parts": {
      "symbol": "adc0804lcwmx.kicad_sym",
      "footprint": "adc0804lcwmx.kicad_mod",
      "model_3d": "adc0804lcwmx-hero.glb",
      "model_3d_plain": "adc0804lcwmx.glb",
      "model_3d_step": "adc0804lcwmx-etched.step",
      "model_3d_step_plain": "adc0804lcwmx.step",
      "lbr": "adc0804lcwmx.lbr"
    },
    "distributor_links": {
      "lcsc": "C2862929",
      "digikey": "296-36292-2-ND",
      "mouser": "926-ADC0804LCWMX"
    },
    "distributor_check": {
      "checked_at": "2026-11-17T23:13:27Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-36292-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "926-ADC0804LCWMX",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "CS",
        "type": "input",
        "description": "Active-low chip select; CS and WR must be low together to start a conversion, and CS and RD both low enable the data outputs."
      },
      {
        "number": "2",
        "name": "RD",
        "type": "input",
        "description": "Active-low read strobe that, with CS low, enables the tri-state output latches and resets INTR."
      },
      {
        "number": "3",
        "name": "WR",
        "type": "input",
        "description": "Active-low write strobe whose low-to-high transition (with CS low) starts a conversion, and the converter stays in reset while CS and WR are held low."
      },
      {
        "number": "4",
        "name": "CLK IN",
        "type": "input",
        "description": "Schmitt-trigger clock input for an external clock (100 kHz to 1460 kHz, 40% to 60% duty cycle) or for an external RC network that sets the internal clock."
      },
      {
        "number": "5",
        "name": "INTR",
        "type": "output",
        "description": "Active-low interrupt request that goes high-to-low when a conversion completes and is reset by a read (CS and RD low) at least 8 clock periods after assertion."
      },
      {
        "number": "6",
        "name": "VIN(+)",
        "type": "power_in",
        "description": "Non-inverting differential analog input, which must stay within GND - 0.05 V to VCC + 0.05 V."
      },
      {
        "number": "7",
        "name": "VIN(-)",
        "type": "power_in",
        "description": "Inverting differential analog input used to offset the zero level; if VIN(-) is greater than or equal to VIN(+) the output code is 0000 0000."
      },
      {
        "number": "8",
        "name": "A GND",
        "type": "power_in",
        "description": "Analog ground pin, which should always be wired to the D GND point."
      },
      {
        "number": "9",
        "name": "VREF/2",
        "type": "power_in",
        "description": "Reference voltage input for full-scale adjustment, with an internal gain of 2 so the full-scale differential input is twice this voltage."
      },
      {
        "number": "10",
        "name": "D GND",
        "type": "power_in",
        "description": "Digital ground pin, to which the supply bypass capacitor and any self-clocking capacitor should be returned."
      },
      {
        "number": "11",
        "name": "DB7",
        "type": "tri_state",
        "description": "Tri-state latched data output bit 7 (MSB), valid when CS and RD are both low."
      },
      {
        "number": "12",
        "name": "DB6",
        "type": "tri_state",
        "description": "Tri-state latched data output bit 6, valid when CS and RD are both low."
      },
      {
        "number": "13",
        "name": "DB5",
        "type": "tri_state",
        "description": "Tri-state latched data output bit 5, valid when CS and RD are both low."
      },
      {
        "number": "14",
        "name": "DB4",
        "type": "tri_state",
        "description": "Tri-state latched data output bit 4, valid when CS and RD are both low."
      },
      {
        "number": "15",
        "name": "DB3",
        "type": "tri_state",
        "description": "Tri-state latched data output bit 3, valid when CS and RD are both low."
      },
      {
        "number": "16",
        "name": "DB2",
        "type": "tri_state",
        "description": "Tri-state latched data output bit 2, valid when CS and RD are both low."
      },
      {
        "number": "17",
        "name": "DB1",
        "type": "tri_state",
        "description": "Tri-state latched data output bit 1, valid when CS and RD are both low."
      },
      {
        "number": "18",
        "name": "DB0 (LSB)",
        "type": "tri_state",
        "description": "Tri-state latched data output bit 0 (LSB), valid when CS and RD are both low."
      },
      {
        "number": "19",
        "name": "CLK R",
        "type": "input",
        "description": "RC timing resistor input for the internal clock generator; heavy capacitive or DC loading of this pin should be avoided."
      },
      {
        "number": "20",
        "name": "VCC (or VREF)",
        "type": "power_in",
        "description": "+5 V supply voltage, which also serves as the upper reference input to the ladder."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet pin table labels the DB outputs as 'O' and pin 20 as 'I'; I mapped the DB outputs to t; The datasheet pin table types CLK R as an input, but the text does not give a valid timing resistor "
        ],
        "pages_sent": 58,
        "cost_usd": 0.1858,
        "at": "2026-11-17T23:12:44"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/adc0804lcwmx.pdf",
        "pages": 58,
        "sha256": "44bd9e8071ef6612",
        "source_tier": "mfr",
        "citation": "Texas Instruments datasheet"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 20,
        "described": 20,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "adc0804lcwmx.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          12.8,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "59a10b341e6972b31d81802a048060326da627d8b92dcf4263064f4f62ec808e",
        "checked": "2026-11-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "adc0804lcwmx-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          12.8,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b876c4187f18011bc5ebe9c2737c57f3db94993ba24dc9528cc377ceec5100ad",
        "checked": "2026-11-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "DW0020A",
      "source_page": 55,
      "D": {
        "nom_mm": 12.8,
        "range_mm": [
          12.6,
          13.0
        ]
      },
      "E1": {
        "nom_mm": 7.5,
        "range_mm": [
          7.4,
          7.6
        ]
      },
      "E": {
        "nom_mm": 10.3,
        "range_mm": [
          9.97,
          10.63
        ]
      },
      "e": {
        "nom_mm": 1.27,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 2.65,
        "range_mm": [
          null,
          2.65
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "adc0804lcwmx.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}