main
History Download
Ray Publish 0.1.3 7061335

AD9057BRSZ-80

Analog Devices · Analog To Digital Converters (ADCs) · SSOP-20-208mil

AD9057BRSZ-80 from Analog Devices, in a SSOP-20-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PWRDN input Power-down function select: logic high puts the ADC into power-down mode with digital outputs in high impedance, and pin 1 should be tied to ground if power-down is not used.
2 VREF OUT power_in Internal reference output of 2.5 V typical that should be bypassed to ground with 0.1 µF.
3 VREF IN power_in Reference input for the ADC at 2.5 V typical with ±10% tolerance.
4 GND power_in Analog and digital ground.
5 VD power_in Analog 5 V power supply.
6 BIAS OUT passive Bias pin for AC coupling, connected through an internal 1 kΩ (±20%) resistor to VREF IN.
7 AIN input Single-ended analog input to the ADC, with a 1.0 V p-p input range centered at 2.5 V.
8 VD power_in Analog 5 V power supply.
9 GND power_in Analog and digital ground.
10 ENCODE input Encode clock for the ADC, which samples on the rising edge; the input is TTL/CMOS compatible and the encode signal should be clean and jitter free.
11 D7 output ADC digital output bit 7, the MSB, in offset binary coding.
12 D6 output ADC digital output bit 6, in offset binary coding.
13 D5 output ADC digital output bit 5, in offset binary coding.
14 D4 output ADC digital output bit 4, in offset binary coding.
15 VDD power_in Digital output power supply, nominally 3 V to 5 V, isolated from the analog VD supply.
16 GND power_in Analog and digital ground.
17 D3 output ADC digital output bit 3, in offset binary coding.
18 D2 output ADC digital output bit 2, in offset binary coding.
19 D1 output ADC digital output bit 1, in offset binary coding.
20 D0 output ADC digital output bit 0, the LSB, in offset binary coding.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SSOP-20-208mil
Category ADC/DAC/Data Conversion
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Gain Error, 25°C -6 -2.5 6 % FS 25°C, Test Level I 2
Gain Error, Full temperature range -8 8 % FS Full temperature range, Test Level VI 2
Gain Tempco -70 70 ppm/°C Full temperature range, Test Level V 2
Input Offset Voltage, 25°C -15 0 15 mV 25°C, Test Level I 2
Input Offset Voltage, Full temperature range -25 25 mV Full temperature range, Test Level VI 2
Differential Nonlinearity, 25°C DNL 0.75 1.9 LSB 25°C, Test Level I 2
Differential Nonlinearity, Full temperature range DNL 2 LSB Full temperature range, Test Level VI 2
Integral Nonlinearity, 25°C INL 0.75 1.9 LSB 25°C, Test Level I 2
Integral Nonlinearity, Full temperature range INL 2 LSB Full temperature range, Test Level VI 2
Input Bias Current, 25°C 6 16 mA 25°C, Test Level I 2
Input Bias Current, Full temperature range 25 mA Full temperature range, Test Level VI 2
Band Gap Reference Output Voltage VREF OUT 2.4 2.5 2.6 V Full temperature range, Test Level VI 2
Band Gap Reference Temperature Coefficient -10 10 ppm/°C Full temperature range, Test Level V 2
Maximum Conversion Rate 80 MSPS Full temperature range, Test Level VI 2
Minimum Conversion Rate 5 MSPS Full temperature range, Test Level IV 2
Output Valid Time tV 4 6.6 ns Full temperature range, Test Level IV; measured from 1.5 V encode level to 10%/90% output levels 2
Output Propagation Delay tPD 8 11.3 ns Full temperature range, Test Level IV; measured from 1.5 V encode level to 10%/90% output levels 2
Encode Pulsewidth High tEH 5.5 166 ns 25°C, Test Level IV 2
Encode Pulsewidth Low tEL 5.5 166 ns 25°C, Test Level IV 2
Signal-to-Noise and Distortion (SINAD), with harmonics SINAD 41.5 45 dB fIN = 10.3 MHz, 25°C, Test Level I 2
Effective Number of Bits ENOB 6.6 7.2 Bits fIN = 10.3 MHz, 25°C, Test Level I 2
Signal-to-Noise Ratio (SNR), without harmonics SNR 42.5 46 dB fIN = 10.3 MHz, 25°C, Test Level I 2
Second Harmonic Distortion HD2 -62 -50 dBc fIN = 10.3 MHz, 25°C, Test Level I 2
Third Harmonic Distortion HD3 -60 -46 dBc fIN = 10.3 MHz, 25°C, Test Level I 2
Digital Output Logic 1 Voltage (VDD = 3 V) 2.95 V VDD = 3 V, Full temperature range, Test Level VI 3
Digital Output Logic 1 Voltage (VDD = 5 V) 4.95 V VDD = 5 V, Full temperature range, Test Level IV 3
Digital Output Logic 0 Voltage 0.05 V Full temperature range, Test Level VI 3
Digital Input Logic 1 Voltage 2 V Full temperature range, Test Level VI 2
Digital Input Logic 0 Voltage 0.8 V Full temperature range, Test Level VI 2
Digital Input Logic 1 Current -1 1 mA Full temperature range, Test Level VI 2
Digital Input Logic 0 Current -1 1 mA Full temperature range, Test Level VI 2
VD Supply Current (VD = 5 V) VD 40 51 mA Full temperature range, Test Level VI 3
VDD Supply Current (VDD = 3 V) VDD 7.4 8.8 mA VDD = 3 V output drive, <10 pF loading, dynamic test; Full temperature range, Test Level VI 3
Power Dissipation 220 281 mW Specified encode and 10.3 MHz analog input dynamic test conditions; Full temperature range, Test Level VI 3
Power-Down Dissipation 6 10 mW Full temperature range, Test Level VI 3
VD, VDD Supply Voltage (absolute maximum) VD, VDD 7 V 4
Analog Inputs voltage (absolute maximum) AIN -0.5 V Upper limit printed as VD + 0.5 V; not converted 4
Digital Inputs voltage (absolute maximum) -0.5 V Upper limit printed as VDD + 0.5 V; not converted 4
VREF Input voltage (absolute maximum) VREF IN -0.5 V Upper limit printed as VD + 0.5 V; not converted 4
Digital Output Current (absolute maximum) 20 mA 4
Operating Temperature (absolute maximum) -55 125 °C 4
Storage Temperature (absolute maximum) -65 150 °C 4
Maximum Junction Temperature 150 °C 4
Maximum Case Temperature 150 °C 4
Thermal Resistance, junction-to-case θJC 46 °C/W Typical, RS (SSOP) 20-lead package 3
Thermal Resistance, case-to-ambient θCA 80 °C/W Typical, RS (SSOP) 20-lead package 3
Thermal Resistance, junction-to-ambient θJA 126 °C/W Typical, RS (SSOP) 20-lead package 3

CAD (KiCad official)

  • Symbol: AD9057BRSZ-80
  • Footprint: Package_SO:SSOP-20_5.3x7.2mm_P0.65mm
  • 3D model: SSOP-20-208mil (KiCad packages3D, STEP)
  • 3D model files: ad9057brsz-80-etched.step / ad9057brsz-80-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ad9057brsz-80.step / ad9057brsz-80.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (12 pp, sha256 16ade094d0d3c1ab, retrieved 2026-11-17)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF