← Commit history
Publish 0.1.3
5 files changed
+160−164
README.md+65−73@@ -8,26 +8,26 @@ AD9057BRSZ-80 from Analog Devices, in a SSOP-20-208mil. Pinout and pin descripti | Pin | Name | Type | Function | |---|---|---|---|-| 1 | PWRDN | input | Power-down select: logic high puts the ADC into power-down mode and drives the digital outputs to high impedance, and the pin should be tied to ground if power-down is not wanted. |-| 2 | VREF OUT | power_in | Internal 2.5 V (typ) reference output that should be bypassed to ground with 0.1 µF and can supply up to 300 mA of drive current. |-| 3 | VREF IN | power_in | Reference input for the ADC at 2.5 V typ (±10%), which sets the ADC gain and midscale; the datasheet states gain adjustment of up to ±10% with an external reference. |-| 4 | GND | power_in | Analog/digital ground. |-| 5 | VD | power_in | Analog 5 V power supply (specified at VD = 5 V, ±5%, with absolute maximum of 7 V). |-| 6 | BIAS OUT | passive | Bias pin for AC coupling of the analog input, connected internally through a 1 kΩ (±20%) resistor to REF IN. |-| 7 | AIN | input | Single-ended analog input with 1.0 V p-p full-scale range centered at 2.5 V and 150 kΩ input resistance. |-| 8 | VD | power_in | Analog 5 V power supply (second VD pin, same supply as pin 5). |-| 9 | GND | power_in | Analog/digital ground. |-| 10 | ENCODE | input | Single-ended TTL/CMOS encode clock on which the ADC samples on the rising edge, guaranteed for conversion rates from 5 MSPS to 80 MSPS for this grade. |-| 11 | D7 | tri_state | ADC digital output, MSB, offset binary code; goes high impedance in power-down mode. |-| 12 | D6 | tri_state | ADC digital output bit 6, offset binary code; goes high impedance in power-down mode. |-| 13 | D5 | tri_state | ADC digital output bit 5, offset binary code; goes high impedance in power-down mode. |-| 14 | D4 | tri_state | ADC digital output bit 4, offset binary code; goes high impedance in power-down mode. |-| 15 | VDD | power_in | Digital output power supply, nominally 3 V to 5 V, isolated from the analog VD supply to minimize digital noise coupling. |-| 16 | GND | power_in | Analog/digital ground. |-| 17 | D3 | tri_state | ADC digital output bit 3, offset binary code; goes high impedance in power-down mode. |-| 18 | D2 | tri_state | ADC digital output bit 2, offset binary code; goes high impedance in power-down mode. |-| 19 | D1 | tri_state | ADC digital output bit 1, offset binary code; goes high impedance in power-down mode. |-| 20 | D0 | tri_state | ADC digital output LSB, offset binary code; goes high impedance in power-down mode. |+| 1 | PWRDN | input | Power-down function select: logic high puts the ADC into power-down mode with digital outputs in high impedance, and pin 1 should be tied to ground if power-down is not used. |+| 2 | VREF OUT | power_in | Internal reference output of 2.5 V typical that should be bypassed to ground with 0.1 µF. |+| 3 | VREF IN | power_in | Reference input for the ADC at 2.5 V typical with ±10% tolerance. |+| 4 | GND | power_in | Analog and digital ground. |+| 5 | VD | power_in | Analog 5 V power supply. |+| 6 | BIAS OUT | passive | Bias pin for AC coupling, connected through an internal 1 kΩ (±20%) resistor to VREF IN. |+| 7 | AIN | input | Single-ended analog input to the ADC, with a 1.0 V p-p input range centered at 2.5 V. |+| 8 | VD | power_in | Analog 5 V power supply. |+| 9 | GND | power_in | Analog and digital ground. |+| 10 | ENCODE | input | Encode clock for the ADC, which samples on the rising edge; the input is TTL/CMOS compatible and the encode signal should be clean and jitter free. |+| 11 | D7 | output | ADC digital output bit 7, the MSB, in offset binary coding. |+| 12 | D6 | output | ADC digital output bit 6, in offset binary coding. |+| 13 | D5 | output | ADC digital output bit 5, in offset binary coding. |+| 14 | D4 | output | ADC digital output bit 4, in offset binary coding. |+| 15 | VDD | power_in | Digital output power supply, nominally 3 V to 5 V, isolated from the analog VD supply. |+| 16 | GND | power_in | Analog and digital ground. |+| 17 | D3 | output | ADC digital output bit 3, in offset binary coding. |+| 18 | D2 | output | ADC digital output bit 2, in offset binary coding. |+| 19 | D1 | output | ADC digital output bit 1, in offset binary coding. |+| 20 | D0 | output | ADC digital output bit 0, the LSB, in offset binary coding. | ## Key specifications @@ -44,61 +44,53 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Differential Nonlinearity | | | 0.75 | 1.9 | LSB | 25°C; test level I | 2 |-| Differential Nonlinearity | | | | 2 | LSB | Full temp; test level VI | 2 |-| Integral Nonlinearity | | | 0.75 | 1.9 | LSB | 25°C; test level I | 2 |-| Integral Nonlinearity | | | | 2 | LSB | Full temp; test level VI | 2 |-| Gain Error | | -6 | -2.5 | 6 | % FS | 25°C; test level I; fixed 2.5 V external reference | 2 |-| Gain Error | | -8 | | 8 | % FS | Full temp; test level VI | 2 |-| Gain Tempco | | -70 | | 70 | ppm/°C | Full temp; test level V (printed ±70) | 2 |-| Input Offset Voltage | | -15 | 0 | 15 | mV | 25°C; test level I | 2 |-| Input Offset Voltage | | -25 | | 25 | mV | Full temp; test level VI | 2 |-| Input Bias Current | | | 6 | 16 | mA | 25°C; test level I | 2 |-| Input Bias Current | | | | 25 | mA | Full temp; test level VI | 2 |-| Band Gap Reference Output Voltage | | 2.4 | 2.5 | 2.6 | V | Full temp; test level VI | 2 |-| Band Gap Reference Temperature Coefficient | | -10 | | 10 | ppm/°C | Full temp; test level V (printed ±10) | 2 |-| Maximum Conversion Rate | | | | 80 | MSPS | Full temp; test level VI; -80 grade | 2 |-| Minimum Conversion Rate | | 5 | | | MSPS | Full temp; test level IV | 2 |-| Output Valid Time | tV | 4 | | 6.6 | ns | Full temp; test level IV; note 2: from encode 1.5 V level to 10%/90% output levels | 2 |-| Output Propagation Delay | tPD | 8 | | 11.3 | ns | Full temp; test level IV; note 2: from encode 1.5 V level to 10%/90% output levels | 2 |-| Signal-to-Noise and Distortion (SINAD), with harmonics | | 41.5 | 45 | | dB | fIN = 10.3 MHz; 25°C; test level I; -0.5 dBFS | 2 |-| Effective Number of Bits (ENOB) | | 6.6 | 7.2 | | Bits | fIN = 10.3 MHz; 25°C; test level I | 2 |-| Signal-to-Noise Ratio (SNR), without harmonics | | 42.5 | 46 | | dB | fIN = 10.3 MHz; 25°C; test level I | 2 |-| Second Harmonic Distortion | | | -62 | -50 | dBc | fIN = 10.3 MHz; 25°C; test level I | 2 |-| Third Harmonic Distortion | | | -60 | -46 | dBc | fIN = 10.3 MHz; 25°C; test level I | 2 |-| Logic 1 Voltage (digital inputs) | | 2 | | | V | Full temp; test level VI | 2 |-| Logic 0 Voltage (digital inputs) | | | | 0.8 | V | Full temp; test level VI | 2 |-| Logic 1 Current | | -1 | | 1 | mA | Full temp; test level VI (printed ±1) | 2 |-| Logic 0 Current | | -1 | | 1 | mA | Full temp; test level VI (printed ±1) | 2 |-| Encode Pulsewidth High | tEH | 5.5 | | 166 | ns | 25°C; test level IV | 2 |-| Encode Pulsewidth Low | tEL | 5.5 | | 166 | ns | 25°C; test level IV | 2 |-| Logic 1 Voltage | | 2.95 | | | V | VDD = 3 V; Full temp; test level VI | 3 |-| Logic 1 Voltage | | 4.95 | | | V | VDD = 5 V; Full temp; test level IV | 3 |-| Logic 0 Voltage (digital outputs) | | | | 0.05 | V | Full temp; test level VI | 3 |-| VD Supply Current | VD | | 40 | 51 | mA | VD = 5 V; Full temp; test level VI | 3 |-| VDD Supply Current | VDD | | 7.4 | 8.8 | mA | VDD = 3 V; Full temp; test level VI; note 4 | 3 |-| Power Dissipation | | | 220 | 281 | mW | Notes 5,6: 10.3 MHz -0.5 dBFS input; VD = 5 V ±5%, VDD = 3 V ±5%; Full temp; test level VI | 3 |-| Power-Down Dissipation | | | 6 | 10 | mW | Full temp; test level VI | 3 |-| Supply Voltage VD, VDD (absolute maximum) | | | | 7 | V | | 4 |-| Analog Inputs (max = VD + 0.5 V) | | -0.5 | | | V | Printed maximum is VD + 0.5 V (not a fixed number) | 4 |-| Digital Inputs (max = VDD + 0.5 V) | | -0.5 | | | V | Printed maximum is VDD + 0.5 V (not a fixed number) | 4 |-| VREF Input (max = VD + 0.5 V) | | -0.5 | | | V | Printed maximum is VD + 0.5 V (not a fixed number) | 4 |-| Digital Output Current | | | | 20 | mA | | 4 |+| Gain Error, 25°C | | -6 | -2.5 | 6 | % FS | 25°C, Test Level I | 2 |+| Gain Error, Full temperature range | | -8 | | 8 | % FS | Full temperature range, Test Level VI | 2 |+| Gain Tempco | | -70 | | 70 | ppm/°C | Full temperature range, Test Level V | 2 |+| Input Offset Voltage, 25°C | | -15 | 0 | 15 | mV | 25°C, Test Level I | 2 |+| Input Offset Voltage, Full temperature range | | -25 | | 25 | mV | Full temperature range, Test Level VI | 2 |+| Differential Nonlinearity, 25°C | DNL | | 0.75 | 1.9 | LSB | 25°C, Test Level I | 2 |+| Differential Nonlinearity, Full temperature range | DNL | | | 2 | LSB | Full temperature range, Test Level VI | 2 |+| Integral Nonlinearity, 25°C | INL | | 0.75 | 1.9 | LSB | 25°C, Test Level I | 2 |+| Integral Nonlinearity, Full temperature range | INL | | | 2 | LSB | Full temperature range, Test Level VI | 2 |+| Input Bias Current, 25°C | | | 6 | 16 | mA | 25°C, Test Level I | 2 |+| Input Bias Current, Full temperature range | | | | 25 | mA | Full temperature range, Test Level VI | 2 |+| Band Gap Reference Output Voltage | VREF OUT | 2.4 | 2.5 | 2.6 | V | Full temperature range, Test Level VI | 2 |+| Band Gap Reference Temperature Coefficient | | -10 | | 10 | ppm/°C | Full temperature range, Test Level V | 2 |+| Maximum Conversion Rate | | | | 80 | MSPS | Full temperature range, Test Level VI | 2 |+| Minimum Conversion Rate | | 5 | | | MSPS | Full temperature range, Test Level IV | 2 |+| Output Valid Time | tV | | 4 | 6.6 | ns | Full temperature range, Test Level IV; measured from 1.5 V encode level to 10%/90% output levels | 2 |+| Output Propagation Delay | tPD | | 8 | 11.3 | ns | Full temperature range, Test Level IV; measured from 1.5 V encode level to 10%/90% output levels | 2 |+| Encode Pulsewidth High | tEH | 5.5 | | 166 | ns | 25°C, Test Level IV | 2 |+| Encode Pulsewidth Low | tEL | 5.5 | | 166 | ns | 25°C, Test Level IV | 2 |+| Signal-to-Noise and Distortion (SINAD), with harmonics | SINAD | 41.5 | 45 | | dB | fIN = 10.3 MHz, 25°C, Test Level I | 2 |+| Effective Number of Bits | ENOB | 6.6 | 7.2 | | Bits | fIN = 10.3 MHz, 25°C, Test Level I | 2 |+| Signal-to-Noise Ratio (SNR), without harmonics | SNR | 42.5 | 46 | | dB | fIN = 10.3 MHz, 25°C, Test Level I | 2 |+| Second Harmonic Distortion | HD2 | | -62 | -50 | dBc | fIN = 10.3 MHz, 25°C, Test Level I | 2 |+| Third Harmonic Distortion | HD3 | | -60 | -46 | dBc | fIN = 10.3 MHz, 25°C, Test Level I | 2 |+| Digital Output Logic 1 Voltage (VDD = 3 V) | | 2.95 | | | V | VDD = 3 V, Full temperature range, Test Level VI | 3 |+| Digital Output Logic 1 Voltage (VDD = 5 V) | | 4.95 | | | V | VDD = 5 V, Full temperature range, Test Level IV | 3 |+| Digital Output Logic 0 Voltage | | | | 0.05 | V | Full temperature range, Test Level VI | 3 |+| Digital Input Logic 1 Voltage | | 2 | | | V | Full temperature range, Test Level VI | 2 |+| Digital Input Logic 0 Voltage | | | | 0.8 | V | Full temperature range, Test Level VI | 2 |+| Digital Input Logic 1 Current | | -1 | | 1 | mA | Full temperature range, Test Level VI | 2 |+| Digital Input Logic 0 Current | | -1 | | 1 | mA | Full temperature range, Test Level VI | 2 |+| VD Supply Current (VD = 5 V) | VD | | 40 | 51 | mA | Full temperature range, Test Level VI | 3 |+| VDD Supply Current (VDD = 3 V) | VDD | | 7.4 | 8.8 | mA | VDD = 3 V output drive, <10 pF loading, dynamic test; Full temperature range, Test Level VI | 3 |+| Power Dissipation | | | 220 | 281 | mW | Specified encode and 10.3 MHz analog input dynamic test conditions; Full temperature range, Test Level VI | 3 |+| Power-Down Dissipation | | | 6 | 10 | mW | Full temperature range, Test Level VI | 3 |+| VD, VDD Supply Voltage (absolute maximum) | VD, VDD | | | 7 | V | | 4 |+| Analog Inputs voltage (absolute maximum) | AIN | -0.5 | | | V | Upper limit printed as VD + 0.5 V; not converted | 4 |+| Digital Inputs voltage (absolute maximum) | | -0.5 | | | V | Upper limit printed as VDD + 0.5 V; not converted | 4 |+| VREF Input voltage (absolute maximum) | VREF IN | -0.5 | | | V | Upper limit printed as VD + 0.5 V; not converted | 4 |+| Digital Output Current (absolute maximum) | | | | 20 | mA | | 4 | | Operating Temperature (absolute maximum) | | -55 | | 125 | °C | | 4 |-| Storage Temperature | | -65 | | 150 | °C | | 4 |+| Storage Temperature (absolute maximum) | | -65 | | 150 | °C | | 4 | | Maximum Junction Temperature | | | | 150 | °C | | 4 | | Maximum Case Temperature | | | | 150 | °C | | 4 |-| Thermal Resistance, junction-to-case (RS 20-lead SSOP) | θJC | | 46 | | °C/W | Typical | 3 |-| Thermal Resistance, case-to-ambient (RS 20-lead SSOP) | θCA | | 80 | | °C/W | Typical | 3 |-| Thermal Resistance, junction-to-ambient (RS 20-lead SSOP) | θJA | | 126 | | °C/W | Typical | 3 |-| Operating Temperature Range (industrial) | | -40 | | 85 | °C | Ordering guide; industrial range | 4 |-| VDD Digital Output Supply | VDD | 3 | | 5 | V | Nominally 3 V to 5 V | 4 |-| Power-Down Time before high-impedance outputs | | 200 | | | ns | Minimum; PWRDN high | 8 |-| Power-Up Period before accurate output data | | 200 | | | ns | Minimum | 8 |-| Analog Supply VD tolerance | VD | -5 | | 5 | % | Note 5 test conditions (VD = 5 V ±5%) | 3 |-| VREF IN tolerance | VREF IN | -10 | | 10 | % | External reference 2.5 V typ ±10% | 4 |-| Analog Supply VD | VD | | 5 | | V | Nominal; test conditions VD = 5 V | 3 |-| Band Gap Reference Output Voltage (VREF IN nominal) | VREF IN | | 2.5 | | V | Typical external reference input | 4 |+| Thermal Resistance, junction-to-case | θJC | | 46 | | °C/W | Typical, RS (SSOP) 20-lead package | 3 |+| Thermal Resistance, case-to-ambient | θCA | | 80 | | °C/W | Typical, RS (SSOP) 20-lead package | 3 |+| Thermal Resistance, junction-to-ambient | θJA | | 126 | | °C/W | Typical, RS (SSOP) 20-lead package | 3 | ## CAD (KiCad official) @@ -111,7 +103,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/AD9057.pdf) (12 pp, sha256 `16ade094d0d3c1ab`, retrieved 2026-11-13, tier: manufacturer)+- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/AD9057.pdf) (12 pp, sha256 `16ade094d0d3c1ab`, retrieved 2026-11-17) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).
ad9057brsz-80.kicad_sym+8−8@@ -48,19 +48,19 @@ (name "ENCODE" (effects (font (size 1.27 1.27)))) (number "10" (effects (font (size 1.27 1.27)))) )- (pin tri_state line (at 17.78 10.16 180) (length 5.08)+ (pin output line (at 17.78 10.16 180) (length 5.08) (name "D0" (effects (font (size 1.27 1.27)))) (number "20" (effects (font (size 1.27 1.27)))) )- (pin tri_state line (at 17.78 7.62 180) (length 5.08)+ (pin output line (at 17.78 7.62 180) (length 5.08) (name "D1" (effects (font (size 1.27 1.27)))) (number "19" (effects (font (size 1.27 1.27)))) )- (pin tri_state line (at 17.78 5.08 180) (length 5.08)+ (pin output line (at 17.78 5.08 180) (length 5.08) (name "D2" (effects (font (size 1.27 1.27)))) (number "18" (effects (font (size 1.27 1.27)))) )- (pin tri_state line (at 17.78 2.54 180) (length 5.08)+ (pin output line (at 17.78 2.54 180) (length 5.08) (name "D3" (effects (font (size 1.27 1.27)))) (number "17" (effects (font (size 1.27 1.27)))) )@@ -72,19 +72,19 @@ (name "VDD" (effects (font (size 1.27 1.27)))) (number "15" (effects (font (size 1.27 1.27)))) )- (pin tri_state line (at 17.78 -5.08 180) (length 5.08)+ (pin output line (at 17.78 -5.08 180) (length 5.08) (name "D4" (effects (font (size 1.27 1.27)))) (number "14" (effects (font (size 1.27 1.27)))) )- (pin tri_state line (at 17.78 -7.62 180) (length 5.08)+ (pin output line (at 17.78 -7.62 180) (length 5.08) (name "D5" (effects (font (size 1.27 1.27)))) (number "13" (effects (font (size 1.27 1.27)))) )- (pin tri_state line (at 17.78 -10.16 180) (length 5.08)+ (pin output line (at 17.78 -10.16 180) (length 5.08) (name "D6" (effects (font (size 1.27 1.27)))) (number "12" (effects (font (size 1.27 1.27)))) )- (pin tri_state line (at 17.78 -12.70 180) (length 5.08)+ (pin output line (at 17.78 -12.70 180) (length 5.08) (name "D7" (effects (font (size 1.27 1.27)))) (number "11" (effects (font (size 1.27 1.27)))) )
ad9057brsz-80.lbr+8−8@@ -115,16 +115,16 @@ <pin name="VD@2" x="-17.78" y="-7.62" length="middle" direction="pwr"/> <pin name="GND@2" x="-17.78" y="-10.16" length="middle" direction="pwr"/> <pin name="ENCODE" x="-17.78" y="-12.7" length="middle" direction="in"/>- <pin name="D0" x="17.78" y="10.16" length="middle" direction="hiz" rot="R180"/>- <pin name="D1" x="17.78" y="7.62" length="middle" direction="hiz" rot="R180"/>- <pin name="D2" x="17.78" y="5.08" length="middle" direction="hiz" rot="R180"/>- <pin name="D3" x="17.78" y="2.54" length="middle" direction="hiz" rot="R180"/>+ <pin name="D0" x="17.78" y="10.16" length="middle" direction="out" rot="R180"/>+ <pin name="D1" x="17.78" y="7.62" length="middle" direction="out" rot="R180"/>+ <pin name="D2" x="17.78" y="5.08" length="middle" direction="out" rot="R180"/>+ <pin name="D3" x="17.78" y="2.54" length="middle" direction="out" rot="R180"/> <pin name="GND@3" x="17.78" y="0" length="middle" direction="pwr" rot="R180"/> <pin name="VDD" x="17.78" y="-2.54" length="middle" direction="pwr" rot="R180"/>- <pin name="D4" x="17.78" y="-5.08" length="middle" direction="hiz" rot="R180"/>- <pin name="D5" x="17.78" y="-7.62" length="middle" direction="hiz" rot="R180"/>- <pin name="D6" x="17.78" y="-10.16" length="middle" direction="hiz" rot="R180"/>- <pin name="D7" x="17.78" y="-12.7" length="middle" direction="hiz" rot="R180"/>+ <pin name="D4" x="17.78" y="-5.08" length="middle" direction="out" rot="R180"/>+ <pin name="D5" x="17.78" y="-7.62" length="middle" direction="out" rot="R180"/>+ <pin name="D6" x="17.78" y="-10.16" length="middle" direction="out" rot="R180"/>+ <pin name="D7" x="17.78" y="-12.7" length="middle" direction="out" rot="R180"/> </symbol> </symbols> <devicesets>
package.json+38−37@@ -1,6 +1,6 @@ { "slug": "ad9057brsz-80",- "version": "0.1.2",+ "version": "0.1.3", "type": "component", "description": "Analog Devices Analog To Digital Converters (ADCs), SSOP-20-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -53,7 +53,7 @@ "mouser": "584-AD9057BRSZ-80" }, "distributor_check": {- "checked_at": "2026-11-13T01:41:43Z",+ "checked_at": "2026-11-17T22:37:14Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "AD9057BRSZ-80-ND",@@ -69,121 +69,121 @@ "number": "1", "name": "PWRDN", "type": "input",- "description": "Power-down select: logic high puts the ADC into power-down mode and drives the digital outputs to high impedance, and the pin should be tied to ground if power-down is not wanted."+ "description": "Power-down function select: logic high puts the ADC into power-down mode with digital outputs in high impedance, and pin 1 should be tied to ground if power-down is not used." }, { "number": "2", "name": "VREF OUT", "type": "power_in",- "description": "Internal 2.5 V (typ) reference output that should be bypassed to ground with 0.1 µF and can supply up to 300 mA of drive current."+ "description": "Internal reference output of 2.5 V typical that should be bypassed to ground with 0.1 µF." }, { "number": "3", "name": "VREF IN", "type": "power_in",- "description": "Reference input for the ADC at 2.5 V typ (±10%), which sets the ADC gain and midscale; the datasheet states gain adjustment of up to ±10% with an external reference."+ "description": "Reference input for the ADC at 2.5 V typical with ±10% tolerance." }, { "number": "4", "name": "GND", "type": "power_in",- "description": "Analog/digital ground."+ "description": "Analog and digital ground." }, { "number": "5", "name": "VD", "type": "power_in",- "description": "Analog 5 V power supply (specified at VD = 5 V, ±5%, with absolute maximum of 7 V)."+ "description": "Analog 5 V power supply." }, { "number": "6", "name": "BIAS OUT", "type": "passive",- "description": "Bias pin for AC coupling of the analog input, connected internally through a 1 kΩ (±20%) resistor to REF IN."+ "description": "Bias pin for AC coupling, connected through an internal 1 kΩ (±20%) resistor to VREF IN." }, { "number": "7", "name": "AIN", "type": "input",- "description": "Single-ended analog input with 1.0 V p-p full-scale range centered at 2.5 V and 150 kΩ input resistance."+ "description": "Single-ended analog input to the ADC, with a 1.0 V p-p input range centered at 2.5 V." }, { "number": "8", "name": "VD", "type": "power_in",- "description": "Analog 5 V power supply (second VD pin, same supply as pin 5)."+ "description": "Analog 5 V power supply." }, { "number": "9", "name": "GND", "type": "power_in",- "description": "Analog/digital ground."+ "description": "Analog and digital ground." }, { "number": "10", "name": "ENCODE", "type": "input",- "description": "Single-ended TTL/CMOS encode clock on which the ADC samples on the rising edge, guaranteed for conversion rates from 5 MSPS to 80 MSPS for this grade."+ "description": "Encode clock for the ADC, which samples on the rising edge; the input is TTL/CMOS compatible and the encode signal should be clean and jitter free." }, { "number": "11", "name": "D7",- "type": "tri_state",- "description": "ADC digital output, MSB, offset binary code; goes high impedance in power-down mode."+ "type": "output",+ "description": "ADC digital output bit 7, the MSB, in offset binary coding." }, { "number": "12", "name": "D6",- "type": "tri_state",- "description": "ADC digital output bit 6, offset binary code; goes high impedance in power-down mode."+ "type": "output",+ "description": "ADC digital output bit 6, in offset binary coding." }, { "number": "13", "name": "D5",- "type": "tri_state",- "description": "ADC digital output bit 5, offset binary code; goes high impedance in power-down mode."+ "type": "output",+ "description": "ADC digital output bit 5, in offset binary coding." }, { "number": "14", "name": "D4",- "type": "tri_state",- "description": "ADC digital output bit 4, offset binary code; goes high impedance in power-down mode."+ "type": "output",+ "description": "ADC digital output bit 4, in offset binary coding." }, { "number": "15", "name": "VDD", "type": "power_in",- "description": "Digital output power supply, nominally 3 V to 5 V, isolated from the analog VD supply to minimize digital noise coupling."+ "description": "Digital output power supply, nominally 3 V to 5 V, isolated from the analog VD supply." }, { "number": "16", "name": "GND", "type": "power_in",- "description": "Analog/digital ground."+ "description": "Analog and digital ground." }, { "number": "17", "name": "D3",- "type": "tri_state",- "description": "ADC digital output bit 3, offset binary code; goes high impedance in power-down mode."+ "type": "output",+ "description": "ADC digital output bit 3, in offset binary coding." }, { "number": "18", "name": "D2",- "type": "tri_state",- "description": "ADC digital output bit 2, offset binary code; goes high impedance in power-down mode."+ "type": "output",+ "description": "ADC digital output bit 2, in offset binary coding." }, { "number": "19", "name": "D1",- "type": "tri_state",- "description": "ADC digital output bit 1, offset binary code; goes high impedance in power-down mode."+ "type": "output",+ "description": "ADC digital output bit 1, in offset binary coding." }, { "number": "20", "name": "D0",- "type": "tri_state",- "description": "ADC digital output LSB, offset binary code; goes high impedance in power-down mode."+ "type": "output",+ "description": "ADC digital output bit 0, the LSB, in offset binary coding." } ], "provenance": {@@ -197,17 +197,18 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The requested MPN AD9057BRSZ-80 does not appear in the datasheet. The ordering guide lists AD9057BRS; The pin-number and pin-name mapping was taken from the 'PIN FUNCTION DESCRIPTIONS' table on page 4. ; Digital output types were set to tri_state because the datasheet states the outputs go to high imped"+ "extractor flagged: The ordering MPN in the request is AD9057BRSZ-80, but the datasheet lists only AD9057BRS-80 (package; Pin numbers were assigned from the pin function table on page 4, which is the authoritative source. ; Pin types for D7-D0 are listed as output. The datasheet states the digital outputs go to high impeda" ], "pages_sent": 12,- "cost_usd": 0.0767,- "at": "2026-11-13T01:41:27"+ "cost_usd": 0.0764,+ "at": "2026-11-17T22:36:30" }, "datasheet": { "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/AD9057.pdf", "pages": 12, "sha256": "16ade094d0d3c1ab",- "source_tier": "mfr"+ "source_tier": "mfr",+ "citation": "Analog Devices datasheet" }, "cad": "KiCad official (CC-BY-SA 4.0)", "pins": {@@ -238,7 +239,7 @@ "centre_offset_mm": 0.0, "footprint_binding": "identity", "sha256": "c9a01a276d0b4d9561efd58f2fcee56f52c1b6ab464ea7a0380cab4e87a924e6",- "checked": "2026-11-13",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -256,8 +257,8 @@ "zmin_mm": 0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "146bd9aaaa290471bd662c0703a64b86c32605cafc9dd97ce4bef3cfd172716f",- "checked": "2026-11-13",+ "sha256": "fb84cbb97e3b8ddfb4b6a2f24d874d94cdc84c83864cbd215aeb6d5a64d36b85",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ],
page.json+41−38@@ -4,7 +4,7 @@ "slug": "ad9057brsz-80", "title": "AD9057BRSZ-80", "brief": "Analog Devices Analog To Digital Converters (ADCs), SSOP-20-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.2",+ "version": "0.1.3", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -36,7 +36,7 @@ "mouser": "584-AD9057BRSZ-80" }, "distributor_check": {- "checked_at": "2026-11-13T01:41:43Z",+ "checked_at": "2026-11-17T22:37:14Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "AD9057BRSZ-80-ND",@@ -52,121 +52,121 @@ "number": "1", "name": "PWRDN", "type": "input",- "description": "Power-down select: logic high puts the ADC into power-down mode and drives the digital outputs to high impedance, and the pin should be tied to ground if power-down is not wanted."+ "description": "Power-down function select: logic high puts the ADC into power-down mode with digital outputs in high impedance, and pin 1 should be tied to ground if power-down is not used." }, { "number": "2", "name": "VREF OUT", "type": "power_in",- "description": "Internal 2.5 V (typ) reference output that should be bypassed to ground with 0.1 µF and can supply up to 300 mA of drive current."+ "description": "Internal reference output of 2.5 V typical that should be bypassed to ground with 0.1 µF." }, { "number": "3", "name": "VREF IN", "type": "power_in",- "description": "Reference input for the ADC at 2.5 V typ (±10%), which sets the ADC gain and midscale; the datasheet states gain adjustment of up to ±10% with an external reference."+ "description": "Reference input for the ADC at 2.5 V typical with ±10% tolerance." }, { "number": "4", "name": "GND", "type": "power_in",- "description": "Analog/digital ground."+ "description": "Analog and digital ground." }, { "number": "5", "name": "VD", "type": "power_in",- "description": "Analog 5 V power supply (specified at VD = 5 V, ±5%, with absolute maximum of 7 V)."+ "description": "Analog 5 V power supply." }, { "number": "6", "name": "BIAS OUT", "type": "passive",- "description": "Bias pin for AC coupling of the analog input, connected internally through a 1 kΩ (±20%) resistor to REF IN."+ "description": "Bias pin for AC coupling, connected through an internal 1 kΩ (±20%) resistor to VREF IN." }, { "number": "7", "name": "AIN", "type": "input",- "description": "Single-ended analog input with 1.0 V p-p full-scale range centered at 2.5 V and 150 kΩ input resistance."+ "description": "Single-ended analog input to the ADC, with a 1.0 V p-p input range centered at 2.5 V." }, { "number": "8", "name": "VD", "type": "power_in",- "description": "Analog 5 V power supply (second VD pin, same supply as pin 5)."+ "description": "Analog 5 V power supply." }, { "number": "9", "name": "GND", "type": "power_in",- "description": "Analog/digital ground."+ "description": "Analog and digital ground." }, { "number": "10", "name": "ENCODE", "type": "input",- "description": "Single-ended TTL/CMOS encode clock on which the ADC samples on the rising edge, guaranteed for conversion rates from 5 MSPS to 80 MSPS for this grade."+ "description": "Encode clock for the ADC, which samples on the rising edge; the input is TTL/CMOS compatible and the encode signal should be clean and jitter free." }, { "number": "11", "name": "D7",- "type": "tri_state",- "description": "ADC digital output, MSB, offset binary code; goes high impedance in power-down mode."+ "type": "output",+ "description": "ADC digital output bit 7, the MSB, in offset binary coding." }, { "number": "12", "name": "D6",- "type": "tri_state",- "description": "ADC digital output bit 6, offset binary code; goes high impedance in power-down mode."+ "type": "output",+ "description": "ADC digital output bit 6, in offset binary coding." }, { "number": "13", "name": "D5",- "type": "tri_state",- "description": "ADC digital output bit 5, offset binary code; goes high impedance in power-down mode."+ "type": "output",+ "description": "ADC digital output bit 5, in offset binary coding." }, { "number": "14", "name": "D4",- "type": "tri_state",- "description": "ADC digital output bit 4, offset binary code; goes high impedance in power-down mode."+ "type": "output",+ "description": "ADC digital output bit 4, in offset binary coding." }, { "number": "15", "name": "VDD", "type": "power_in",- "description": "Digital output power supply, nominally 3 V to 5 V, isolated from the analog VD supply to minimize digital noise coupling."+ "description": "Digital output power supply, nominally 3 V to 5 V, isolated from the analog VD supply." }, { "number": "16", "name": "GND", "type": "power_in",- "description": "Analog/digital ground."+ "description": "Analog and digital ground." }, { "number": "17", "name": "D3",- "type": "tri_state",- "description": "ADC digital output bit 3, offset binary code; goes high impedance in power-down mode."+ "type": "output",+ "description": "ADC digital output bit 3, in offset binary coding." }, { "number": "18", "name": "D2",- "type": "tri_state",- "description": "ADC digital output bit 2, offset binary code; goes high impedance in power-down mode."+ "type": "output",+ "description": "ADC digital output bit 2, in offset binary coding." }, { "number": "19", "name": "D1",- "type": "tri_state",- "description": "ADC digital output bit 1, offset binary code; goes high impedance in power-down mode."+ "type": "output",+ "description": "ADC digital output bit 1, in offset binary coding." }, { "number": "20", "name": "D0",- "type": "tri_state",- "description": "ADC digital output LSB, offset binary code; goes high impedance in power-down mode."+ "type": "output",+ "description": "ADC digital output bit 0, the LSB, in offset binary coding." } ], "provenance": {@@ -180,17 +180,18 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The requested MPN AD9057BRSZ-80 does not appear in the datasheet. The ordering guide lists AD9057BRS; The pin-number and pin-name mapping was taken from the 'PIN FUNCTION DESCRIPTIONS' table on page 4. ; Digital output types were set to tri_state because the datasheet states the outputs go to high imped"+ "extractor flagged: The ordering MPN in the request is AD9057BRSZ-80, but the datasheet lists only AD9057BRS-80 (package; Pin numbers were assigned from the pin function table on page 4, which is the authoritative source. ; Pin types for D7-D0 are listed as output. The datasheet states the digital outputs go to high impeda" ], "pages_sent": 12,- "cost_usd": 0.0767,- "at": "2026-11-13T01:41:27"+ "cost_usd": 0.0764,+ "at": "2026-11-17T22:36:30" }, "datasheet": { "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/AD9057.pdf", "pages": 12, "sha256": "16ade094d0d3c1ab",- "source_tier": "mfr"+ "source_tier": "mfr",+ "citation": "Analog Devices datasheet" }, "cad": "KiCad official (CC-BY-SA 4.0)", "pins": {@@ -221,7 +222,7 @@ "centre_offset_mm": 0, "footprint_binding": "identity", "sha256": "c9a01a276d0b4d9561efd58f2fcee56f52c1b6ab464ea7a0380cab4e87a924e6",- "checked": "2026-11-13",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -239,8 +240,8 @@ "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "146bd9aaaa290471bd662c0703a64b86c32605cafc9dd97ce4bef3cfd172716f",- "checked": "2026-11-13",+ "sha256": "fb84cbb97e3b8ddfb4b6a2f24d874d94cdc84c83864cbd215aeb6d5a64d36b85",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ],@@ -1006,5 +1007,7 @@ ], "visibility": { "public": true- }+ },+ "description": "Analog Devices Analog To Digital Converters (ADCs), SSOP-20-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "org": "adom" }