Generated by kicad-footprint-generator · KiCad file format 20260206
AD9057BRSZ-80
Analog Devices · Analog To Digital Converters (ADCs) · SSOP-20-208mil
AD9057BRSZ-80 from Analog Devices, in a SSOP-20-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PWRDN | input | Power-down function select: logic high puts the ADC into power-down mode with digital outputs in high impedance, and pin 1 should be tied to ground if power-down is not used. |
| 2 | VREF OUT | power_in | Internal reference output of 2.5 V typical that should be bypassed to ground with 0.1 µF. |
| 3 | VREF IN | power_in | Reference input for the ADC at 2.5 V typical with ±10% tolerance. |
| 4 | GND | power_in | Analog and digital ground. |
| 5 | VD | power_in | Analog 5 V power supply. |
| 6 | BIAS OUT | passive | Bias pin for AC coupling, connected through an internal 1 kΩ (±20%) resistor to VREF IN. |
| 7 | AIN | input | Single-ended analog input to the ADC, with a 1.0 V p-p input range centered at 2.5 V. |
| 8 | VD | power_in | Analog 5 V power supply. |
| 9 | GND | power_in | Analog and digital ground. |
| 10 | ENCODE | input | Encode clock for the ADC, which samples on the rising edge; the input is TTL/CMOS compatible and the encode signal should be clean and jitter free. |
| 11 | D7 | output | ADC digital output bit 7, the MSB, in offset binary coding. |
| 12 | D6 | output | ADC digital output bit 6, in offset binary coding. |
| 13 | D5 | output | ADC digital output bit 5, in offset binary coding. |
| 14 | D4 | output | ADC digital output bit 4, in offset binary coding. |
| 15 | VDD | power_in | Digital output power supply, nominally 3 V to 5 V, isolated from the analog VD supply. |
| 16 | GND | power_in | Analog and digital ground. |
| 17 | D3 | output | ADC digital output bit 3, in offset binary coding. |
| 18 | D2 | output | ADC digital output bit 2, in offset binary coding. |
| 19 | D1 | output | ADC digital output bit 1, in offset binary coding. |
| 20 | D0 | output | ADC digital output bit 0, the LSB, in offset binary coding. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SSOP-20-208mil |
| Category | ADC/DAC/Data Conversion |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Gain Error, 25°C | -6 | -2.5 | 6 | % FS | 25°C, Test Level I | 2 | |
| Gain Error, Full temperature range | -8 | 8 | % FS | Full temperature range, Test Level VI | 2 | ||
| Gain Tempco | -70 | 70 | ppm/°C | Full temperature range, Test Level V | 2 | ||
| Input Offset Voltage, 25°C | -15 | 0 | 15 | mV | 25°C, Test Level I | 2 | |
| Input Offset Voltage, Full temperature range | -25 | 25 | mV | Full temperature range, Test Level VI | 2 | ||
| Differential Nonlinearity, 25°C | DNL | 0.75 | 1.9 | LSB | 25°C, Test Level I | 2 | |
| Differential Nonlinearity, Full temperature range | DNL | 2 | LSB | Full temperature range, Test Level VI | 2 | ||
| Integral Nonlinearity, 25°C | INL | 0.75 | 1.9 | LSB | 25°C, Test Level I | 2 | |
| Integral Nonlinearity, Full temperature range | INL | 2 | LSB | Full temperature range, Test Level VI | 2 | ||
| Input Bias Current, 25°C | 6 | 16 | mA | 25°C, Test Level I | 2 | ||
| Input Bias Current, Full temperature range | 25 | mA | Full temperature range, Test Level VI | 2 | |||
| Band Gap Reference Output Voltage | VREF OUT | 2.4 | 2.5 | 2.6 | V | Full temperature range, Test Level VI | 2 |
| Band Gap Reference Temperature Coefficient | -10 | 10 | ppm/°C | Full temperature range, Test Level V | 2 | ||
| Maximum Conversion Rate | 80 | MSPS | Full temperature range, Test Level VI | 2 | |||
| Minimum Conversion Rate | 5 | MSPS | Full temperature range, Test Level IV | 2 | |||
| Output Valid Time | tV | 4 | 6.6 | ns | Full temperature range, Test Level IV; measured from 1.5 V encode level to 10%/90% output levels | 2 | |
| Output Propagation Delay | tPD | 8 | 11.3 | ns | Full temperature range, Test Level IV; measured from 1.5 V encode level to 10%/90% output levels | 2 | |
| Encode Pulsewidth High | tEH | 5.5 | 166 | ns | 25°C, Test Level IV | 2 | |
| Encode Pulsewidth Low | tEL | 5.5 | 166 | ns | 25°C, Test Level IV | 2 | |
| Signal-to-Noise and Distortion (SINAD), with harmonics | SINAD | 41.5 | 45 | dB | fIN = 10.3 MHz, 25°C, Test Level I | 2 | |
| Effective Number of Bits | ENOB | 6.6 | 7.2 | Bits | fIN = 10.3 MHz, 25°C, Test Level I | 2 | |
| Signal-to-Noise Ratio (SNR), without harmonics | SNR | 42.5 | 46 | dB | fIN = 10.3 MHz, 25°C, Test Level I | 2 | |
| Second Harmonic Distortion | HD2 | -62 | -50 | dBc | fIN = 10.3 MHz, 25°C, Test Level I | 2 | |
| Third Harmonic Distortion | HD3 | -60 | -46 | dBc | fIN = 10.3 MHz, 25°C, Test Level I | 2 | |
| Digital Output Logic 1 Voltage (VDD = 3 V) | 2.95 | V | VDD = 3 V, Full temperature range, Test Level VI | 3 | |||
| Digital Output Logic 1 Voltage (VDD = 5 V) | 4.95 | V | VDD = 5 V, Full temperature range, Test Level IV | 3 | |||
| Digital Output Logic 0 Voltage | 0.05 | V | Full temperature range, Test Level VI | 3 | |||
| Digital Input Logic 1 Voltage | 2 | V | Full temperature range, Test Level VI | 2 | |||
| Digital Input Logic 0 Voltage | 0.8 | V | Full temperature range, Test Level VI | 2 | |||
| Digital Input Logic 1 Current | -1 | 1 | mA | Full temperature range, Test Level VI | 2 | ||
| Digital Input Logic 0 Current | -1 | 1 | mA | Full temperature range, Test Level VI | 2 | ||
| VD Supply Current (VD = 5 V) | VD | 40 | 51 | mA | Full temperature range, Test Level VI | 3 | |
| VDD Supply Current (VDD = 3 V) | VDD | 7.4 | 8.8 | mA | VDD = 3 V output drive, <10 pF loading, dynamic test; Full temperature range, Test Level VI | 3 | |
| Power Dissipation | 220 | 281 | mW | Specified encode and 10.3 MHz analog input dynamic test conditions; Full temperature range, Test Level VI | 3 | ||
| Power-Down Dissipation | 6 | 10 | mW | Full temperature range, Test Level VI | 3 | ||
| VD, VDD Supply Voltage (absolute maximum) | VD, VDD | 7 | V | 4 | |||
| Analog Inputs voltage (absolute maximum) | AIN | -0.5 | V | Upper limit printed as VD + 0.5 V; not converted | 4 | ||
| Digital Inputs voltage (absolute maximum) | -0.5 | V | Upper limit printed as VDD + 0.5 V; not converted | 4 | |||
| VREF Input voltage (absolute maximum) | VREF IN | -0.5 | V | Upper limit printed as VD + 0.5 V; not converted | 4 | ||
| Digital Output Current (absolute maximum) | 20 | mA | 4 | ||||
| Operating Temperature (absolute maximum) | -55 | 125 | °C | 4 | |||
| Storage Temperature (absolute maximum) | -65 | 150 | °C | 4 | |||
| Maximum Junction Temperature | 150 | °C | 4 | ||||
| Maximum Case Temperature | 150 | °C | 4 | ||||
| Thermal Resistance, junction-to-case | θJC | 46 | °C/W | Typical, RS (SSOP) 20-lead package | 3 | ||
| Thermal Resistance, case-to-ambient | θCA | 80 | °C/W | Typical, RS (SSOP) 20-lead package | 3 | ||
| Thermal Resistance, junction-to-ambient | θJA | 126 | °C/W | Typical, RS (SSOP) 20-lead package | 3 |
CAD (KiCad official)
- Symbol:
AD9057BRSZ-80 - Footprint:
Package_SO:SSOP-20_5.3x7.2mm_P0.65mm - 3D model: SSOP-20-208mil (KiCad packages3D, STEP)
- 3D model files:
ad9057brsz-80-etched.step/ad9057brsz-80-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad9057brsz-80.step/ad9057brsz-80.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (12 pp, sha256
16ade094d0d3c1ab, retrieved 2026-11-17) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).