Generated by kicad-footprint-generator · KiCad file format 20260206
AD8330ARQZ
Analog Devices · Pre-ordered Chips · SSOP-16-150mil
AD8330ARQZ from Analog Devices, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OFST | passive | Internal offset compensation pin: an external capacitor here sets the offset loop high-pass corner, the feature is enabled when unconnected and disabled when grounded. |
| 2 | ENBL | input | Power enable, active high. |
| 3 | VPSI | power_in | Positive supply for input stages. |
| 4 | INHI | input | Differential signal input, positive polarity, with a differential input resistance of 1 kΩ typical. |
| 5 | INLO | input | Differential signal input, negative polarity, with a differential input resistance of 1 kΩ typical. |
| 6 | MODE | input | Logic input selecting the gain slope; high makes gain increase with VDBS, with logic levels of 1.5 V (mode up) and 0.5 V (mode down). |
| 7 | VDBS | input | Input for the linear-in-dB gain control voltage, with a normal range of 0 V to 1.5 V. |
| 8 | CMGN | passive | Common baseline for the gain control interfaces, connected to COMM in the normal voltage range. |
| 9 | COMM | power_in | Ground for input and gain control bias circuitry. |
| 10 | VMAG | input | Input for gain/amplitude control, which internally defaults to 0.5 V. |
| 11 | CMOP | power_in | Ground for output stages. |
| 12 | OPLO | output | Differential signal output, negative polarity. |
| 13 | OPHI | output | Differential signal output, positive polarity. |
| 14 | VPSO | power_in | Positive supply for output stages. |
| 15 | CNTR | input | Common-mode output voltage control, which can be driven to within 0.5 V of ground or VS, with outputs defaulting to VS/2. |
| 16 | VPOS | power_in | Positive supply for inner stages. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SSOP-16-150mil |
| Category | Interface ICs |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Full-Scale Input (VDBS = 0 V, differential drive) | 1.4 | 2 | V | VDBS = 0 V, differential drive | 3 | ||
| Full-Scale Input (VDBS = 1.5 V) | 4.5 | 6.3 | mV | VDBS = 1.5 V | 3 | ||
| Common-Mode Voltage Level | 2.75 | 3 | 3.25 | V | 3 | ||
| Permissible CM Range | 0 | V | 3 | ||||
| Peak-to-Peak Output Swing | 1.8 | 2 | 2.2 | V | 3 | ||
| Peak-to-Peak Output Swing (VMAG ≥ 2 V) | 4 | 4.5 | V | VMAG ≥ 2 V (peaks are supply limited) | 3 | ||
| Common-Mode Voltage (Pin CNTR open circuit) | 2.4 | 2.5 | 2.6 | V | Pin CNTR O/C | 3 | |
| Offset Voltage | 1 | 5 | mV | Offset Correction Enabled | 3 | ||
| Offset Voltage | 8 | 40 | mV | Offset Correction Disabled, Pin OFST connected to ground | 3 | ||
| Differential Output Impedance | 120 | 150 | 180 | Ω | Pin-to-pin | 3 | |
| Usable Voltage Range (Pin CNTR) | 0.5 | 4.5 | V | 3 | |||
| Normal Voltage Range (VDBS, CMGN, MODE) | 0 | 1.5 | V | CMGN connected to COMM | 3 | ||
| Elevated Voltage Range (VDBS) | 0.2 | 1.7 | V | CMGN O/C (VCMGN rises to 0.2 V) | 3 | ||
| Gain Scaling | 27 | 30 | 33 | mV/dB | Mode high or low | 3 | |
| Gain Linearity Error | -0.35 | 0.1 | 0.35 | dB | 0.3 V ≤ VDBS ≤ 1.2 V | 3 | |
| Absolute Gain Error | -2 | 0.5 | 2 | dB | VDBS = 0 V | 3 | |
| Peak Output Scaling, Gain vs. VMAG | 3.8 | 4 | 4.2 | V/V | See the Circuit Description section | 4 | |
| Usable Input Range (VMAG) | 0 | 5 | V | 4 | |||
| Default Voltage VMAG | 0.48 | 0.5 | 0.52 | V | VMAG O/C | 4 | |
| Logic Voltage for Hibernate Mode | 1.3 | 1.5 | 1.7 | V | Output pins remain at CNTR | 4 | |
| Current in Full Shutdown | 20 | 100 | µA | Pin ENBL shutdown | 4 | ||
| Supply Voltage | 2.7 | 6 | V | 4 | |||
| Quiescent Current | 20 | 27 | mA | VDBS = 0.75 V | 4 | ||
| Supply Voltage (absolute maximum) | 6 | V | 5 | ||||
| Power Dissipation | 0.62 | W | 16-Lead QSOP Package, 4-layer JEDEC Board (252P) | 5 | |||
| Storage Temperature Range | -65 | 150 | °C | 5 | |||
| Operating Temperature Range | -40 | 85 | °C | 5 | |||
| Lead Temperature (Soldering) | 300 | °C | Soldering 60 sec | 5 | |||
| Thermal Resistance Junction-to-Ambient (θJA) | θJA | 105.4 | °C/W | 16-Lead QSOP Package | 5 | ||
| Thermal Resistance Junction-to-Case (θJC) | θJC | 39 | °C/W | 16-Lead QSOP Package | 5 |
CAD (KiCad official)
- Symbol:
AD8330ARQZ - Footprint:
Package_SO:SSOP-16_3.9x4.9mm_P0.635mm - 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
- 3D model files:
ad8330arqz-etched.step/ad8330arqz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad8330arqz.step/ad8330arqz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (32 pp, sha256
1f0f9ebcbdcc9778, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).