main
History Download
Ray Publish 0.1.0 2d7c147

AD8330ARQZ

Analog Devices · Pre-ordered Chips · SSOP-16-150mil

AD8330ARQZ from Analog Devices, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OFST passive Internal offset compensation pin: an external capacitor here sets the offset loop high-pass corner, the feature is enabled when unconnected and disabled when grounded.
2 ENBL input Power enable, active high.
3 VPSI power_in Positive supply for input stages.
4 INHI input Differential signal input, positive polarity, with a differential input resistance of 1 kΩ typical.
5 INLO input Differential signal input, negative polarity, with a differential input resistance of 1 kΩ typical.
6 MODE input Logic input selecting the gain slope; high makes gain increase with VDBS, with logic levels of 1.5 V (mode up) and 0.5 V (mode down).
7 VDBS input Input for the linear-in-dB gain control voltage, with a normal range of 0 V to 1.5 V.
8 CMGN passive Common baseline for the gain control interfaces, connected to COMM in the normal voltage range.
9 COMM power_in Ground for input and gain control bias circuitry.
10 VMAG input Input for gain/amplitude control, which internally defaults to 0.5 V.
11 CMOP power_in Ground for output stages.
12 OPLO output Differential signal output, negative polarity.
13 OPHI output Differential signal output, positive polarity.
14 VPSO power_in Positive supply for output stages.
15 CNTR input Common-mode output voltage control, which can be driven to within 0.5 V of ground or VS, with outputs defaulting to VS/2.
16 VPOS power_in Positive supply for inner stages.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SSOP-16-150mil
Category Interface ICs
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Full-Scale Input (VDBS = 0 V, differential drive) 1.4 2 V VDBS = 0 V, differential drive 3
Full-Scale Input (VDBS = 1.5 V) 4.5 6.3 mV VDBS = 1.5 V 3
Common-Mode Voltage Level 2.75 3 3.25 V 3
Permissible CM Range 0 V 3
Peak-to-Peak Output Swing 1.8 2 2.2 V 3
Peak-to-Peak Output Swing (VMAG ≥ 2 V) 4 4.5 V VMAG ≥ 2 V (peaks are supply limited) 3
Common-Mode Voltage (Pin CNTR open circuit) 2.4 2.5 2.6 V Pin CNTR O/C 3
Offset Voltage 1 5 mV Offset Correction Enabled 3
Offset Voltage 8 40 mV Offset Correction Disabled, Pin OFST connected to ground 3
Differential Output Impedance 120 150 180 Ω Pin-to-pin 3
Usable Voltage Range (Pin CNTR) 0.5 4.5 V 3
Normal Voltage Range (VDBS, CMGN, MODE) 0 1.5 V CMGN connected to COMM 3
Elevated Voltage Range (VDBS) 0.2 1.7 V CMGN O/C (VCMGN rises to 0.2 V) 3
Gain Scaling 27 30 33 mV/dB Mode high or low 3
Gain Linearity Error -0.35 0.1 0.35 dB 0.3 V ≤ VDBS ≤ 1.2 V 3
Absolute Gain Error -2 0.5 2 dB VDBS = 0 V 3
Peak Output Scaling, Gain vs. VMAG 3.8 4 4.2 V/V See the Circuit Description section 4
Usable Input Range (VMAG) 0 5 V 4
Default Voltage VMAG 0.48 0.5 0.52 V VMAG O/C 4
Logic Voltage for Hibernate Mode 1.3 1.5 1.7 V Output pins remain at CNTR 4
Current in Full Shutdown 20 100 µA Pin ENBL shutdown 4
Supply Voltage 2.7 6 V 4
Quiescent Current 20 27 mA VDBS = 0.75 V 4
Supply Voltage (absolute maximum) 6 V 5
Power Dissipation 0.62 W 16-Lead QSOP Package, 4-layer JEDEC Board (252P) 5
Storage Temperature Range -65 150 °C 5
Operating Temperature Range -40 85 °C 5
Lead Temperature (Soldering) 300 °C Soldering 60 sec 5
Thermal Resistance Junction-to-Ambient (θJA) θJA 105.4 °C/W 16-Lead QSOP Package 5
Thermal Resistance Junction-to-Case (θJC) θJC 39 °C/W 16-Lead QSOP Package 5

CAD (KiCad official)

  • Symbol: AD8330ARQZ
  • Footprint: Package_SO:SSOP-16_3.9x4.9mm_P0.635mm
  • 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
  • 3D model files: ad8330arqz-etched.step / ad8330arqz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ad8330arqz.step / ad8330arqz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (32 pp, sha256 1f0f9ebcbdcc9778, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF