main
Ray Publish 0.1.0 2d7c147
{
  "slug": "ad8330arqz",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Pre-ordered Chips, SSOP-16-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface ics",
    "ad8330arqz",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ad8330arqz.kicad_sym",
    "ad8330arqz.kicad_mod",
    "ad8330arqz.glb",
    "ad8330arqz.step",
    "ad8330arqz.lbr",
    "docs/hero.png",
    "docs/ad8330arqz-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ad8330arqz-hero.glb",
    "ad8330arqz-hero.overlay.json"
  ],
  "component": {
    "mpn": "AD8330ARQZ",
    "manufacturer": "Analog Devices",
    "package": "SSOP-16-150mil",
    "pin_count": 16,
    "category": "Interface ICs",
    "subcategory": "Pre-ordered Chips",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/AD8330.pdf",
    "parts": {
      "symbol": "ad8330arqz.kicad_sym",
      "footprint": "ad8330arqz.kicad_mod",
      "model_3d": "ad8330arqz-hero.glb",
      "model_3d_plain": "ad8330arqz.glb",
      "model_3d_step": "ad8330arqz-etched.step",
      "model_3d_step_plain": "ad8330arqz.step",
      "lbr": "ad8330arqz.lbr"
    },
    "distributor_links": {
      "lcsc": "C578695",
      "digikey": "505-AD8330ARQZ-ND",
      "mouser": "584-AD8330ARQZ"
    },
    "distributor_check": {
      "checked_at": "2026-11-13T09:50:27Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-AD8330ARQZ-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-AD8330ARQZ",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "OFST",
        "type": "passive",
        "description": "Internal offset compensation pin: an external capacitor here sets the offset loop high-pass corner, the feature is enabled when unconnected and disabled when grounded."
      },
      {
        "number": "2",
        "name": "ENBL",
        "type": "input",
        "description": "Power enable, active high."
      },
      {
        "number": "3",
        "name": "VPSI",
        "type": "power_in",
        "description": "Positive supply for input stages."
      },
      {
        "number": "4",
        "name": "INHI",
        "type": "input",
        "description": "Differential signal input, positive polarity, with a differential input resistance of 1 kΩ typical."
      },
      {
        "number": "5",
        "name": "INLO",
        "type": "input",
        "description": "Differential signal input, negative polarity, with a differential input resistance of 1 kΩ typical."
      },
      {
        "number": "6",
        "name": "MODE",
        "type": "input",
        "description": "Logic input selecting the gain slope; high makes gain increase with VDBS, with logic levels of 1.5 V (mode up) and 0.5 V (mode down)."
      },
      {
        "number": "7",
        "name": "VDBS",
        "type": "input",
        "description": "Input for the linear-in-dB gain control voltage, with a normal range of 0 V to 1.5 V."
      },
      {
        "number": "8",
        "name": "CMGN",
        "type": "passive",
        "description": "Common baseline for the gain control interfaces, connected to COMM in the normal voltage range."
      },
      {
        "number": "9",
        "name": "COMM",
        "type": "power_in",
        "description": "Ground for input and gain control bias circuitry."
      },
      {
        "number": "10",
        "name": "VMAG",
        "type": "input",
        "description": "Input for gain/amplitude control, which internally defaults to 0.5 V."
      },
      {
        "number": "11",
        "name": "CMOP",
        "type": "power_in",
        "description": "Ground for output stages."
      },
      {
        "number": "12",
        "name": "OPLO",
        "type": "output",
        "description": "Differential signal output, negative polarity."
      },
      {
        "number": "13",
        "name": "OPHI",
        "type": "output",
        "description": "Differential signal output, positive polarity."
      },
      {
        "number": "14",
        "name": "VPSO",
        "type": "power_in",
        "description": "Positive supply for output stages."
      },
      {
        "number": "15",
        "name": "CNTR",
        "type": "input",
        "description": "Common-mode output voltage control, which can be driven to within 0.5 V of ground or VS, with outputs defaulting to VS/2."
      },
      {
        "number": "16",
        "name": "VPOS",
        "type": "power_in",
        "description": "Positive supply for inner stages."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet never uses the term SSOP. The AD8330ARQZ is listed only in the RQ-16 QSOP package (MO-; The datasheet gives no explicit pin type classification. The types for CMGN, OFST and CNTR were chos"
        ],
        "pages_sent": 9,
        "cost_usd": 0.0037,
        "at": "2026-11-13T09:50:19"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/AD8330.pdf",
        "pages": 32,
        "sha256": "1f0f9ebcbdcc9778",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ad8330arqz.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.85
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3b55ed1c8dc3eb976cfab8b1e135fd29a17f33ebf575a8a088a30e82c9a5f2ee",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ad8330arqz-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.85
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "79845c2913c8897682552c7c368902ccefad5c59176d242ae2f8c38e1b48d8d8",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}