main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ad7671astzrl: viewers · Ray
ad7671astzrl-etched.glb ad7671astzrl: factory component page (tier=mfr) · Ray
ad7671astzrl-etched.step ad7671astzrl: factory component page (tier=mfr) · Ray
ad7671astzrl-hero.glb ad7671astzrl: hero GLB from the etched model (keeps the MPN mark) · Ray
ad7671astzrl-hero.overlay.json ad7671astzrl: hero GLB from the etched model (keeps the MPN mark) · Ray
ad7671astzrl.glb Publish 0.1.0 · Ray
ad7671astzrl.kicad_mod Publish 0.1.0 · Ray
ad7671astzrl.kicad_sym Publish 0.1.0 · Ray
ad7671astzrl.lbr Publish 0.1.0 · Ray
ad7671astzrl.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 48 pins · Ray

AD7671ASTZRL

Analog Devices · Analog To Digital Converters (ADCs) · LQFP-48(7x7)

AD7671ASTZRL from Analog Devices, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 AGND power_in Analog power ground pin.
2 AVDD power_in Input analog power pin, nominally 5 V.
3 NC unconnected No connect.
4 BYTESWAP input Parallel mode 8-/16-bit selection: when LOW the LSB is output on D[7:0] and the MSB on D[15:8]; when HIGH the LSB is on D[15:8] and the MSB on D[7:0].
5 OB/2C input Straight binary/twos complement select: HIGH gives straight binary output, LOW inverts the MSB giving twos complement output.
6 WARP input Mode selection: when HIGH and IMPULSE LOW selects the fastest mode (maximum throughput, minimum conversion rate must be applied for full accuracy); when LOW full accuracy is maintained independent of conversion rate.
7 IMPULSE input Mode selection: when HIGH and WARP LOW selects a reduced power mode where power dissipation is approximately proportional to the sampling rate.
8 SER/PAR input Serial/parallel selection: LOW selects the parallel port, HIGH selects the serial interface mode with some data bus bits used as serial port.
9 D0 output Bit 0 of the parallel port data output bus; high impedance when SER/PAR is HIGH.
10 D1 output Bit 1 of the parallel port data output bus; high impedance when SER/PAR is HIGH.
11 D2/DIVSCLK[0] bidirectional Bit 2 of the parallel data bus when SER/PAR is LOW; when SER/PAR is HIGH, EXT/INT LOW and RDC/SDIN LOW it is an input that slows the internal serial clock, otherwise a high impedance output.
12 D3/DIVSCLK[1] bidirectional Bit 3 of the parallel data bus when SER/PAR is LOW; when SER/PAR is HIGH, EXT/INT LOW and RDC/SDIN LOW it is an input that slows the internal serial clock, otherwise a high impedance output.
13 D4/EXT/INT bidirectional Bit 4 of the parallel data bus when SER/PAR is LOW; when SER/PAR is HIGH it selects internal clock (LOW, master) or external SCLK gated by CS (HIGH, slave).
14 D5/INVSYNC bidirectional Bit 5 of the parallel data bus when SER/PAR is LOW; when SER/PAR is HIGH it selects SYNC active state (LOW: active HIGH, HIGH: active LOW).
15 D6/INVSCLK bidirectional Bit 6 of the parallel data bus when SER/PAR is LOW; when SER/PAR is HIGH it inverts the SCLK signal in both master and slave mode.
16 D7/RDC/SDIN bidirectional Bit 7 of the parallel data bus when SER/PAR is LOW; when SER/PAR is HIGH it is the external serial data input (daisy-chain, EXT/INT HIGH) or read mode select (EXT/INT LOW).
17 OGND power_in Input/output interface digital power ground.
18 OVDD power_in Input/output interface digital power, nominally at the same supply as the host interface (5 V or 3 V).
19 DVDD power_in Digital power, nominally 5 V.
20 DGND power_in Digital power ground.
21 D8/SDOUT output Bit 8 of the parallel data bus when SER/PAR is LOW; when SER/PAR is HIGH it is the serial data output, MSB first, synchronized to SCLK.
22 D9/SCLK bidirectional Bit 9 of the parallel data bus when SER/PAR is LOW; when SER/PAR is HIGH it is the serial data clock input or output depending on EXT/INT.
23 D10/SYNC output Bit 10 of the parallel data bus when SER/PAR is LOW; when SER/PAR is HIGH it is the frame synchronization output for the internal data clock, polarity set by INVSYNC.
24 D11/RDERROR output Bit 11 of the parallel data bus when SER/PAR is LOW; when SER/PAR and EXT/INT are HIGH it is the incomplete read error flag, pulsed HIGH when a slave-mode read is not complete at the next conversion.
25 D12 output Bit 12 of the parallel port data output bus; high impedance when SER/PAR is HIGH.
26 D13 output Bit 13 of the parallel port data output bus; high impedance when SER/PAR is HIGH.
27 D14 output Bit 14 of the parallel port data output bus; high impedance when SER/PAR is HIGH.
28 D15 output Bit 15 of the parallel port data output bus; high impedance when SER/PAR is HIGH.
29 BUSY output Busy output; goes HIGH when a conversion starts and stays HIGH until the conversion is complete and data is latched, falling edge usable as data-ready clock.
30 DGND power_in Must be tied to digital ground.
31 RD input Read data; when CS and RD are both LOW the parallel or serial output bus is enabled.
32 CS input Chip select; when CS and RD are both LOW the output bus is enabled, and CS also gates the external serial clock.
33 RESET input Reset input; a logic HIGH resets the AD7671 and aborts any current conversion, can be tied to DGND if unused.
34 PD input Power-down input; when HIGH power consumption is reduced and conversions are inhibited after the current one completes.
35 CNVST input Start conversion; a falling edge puts the sample-and-hold into hold and initiates a conversion, and in Impulse Mode holding it LOW at end of acquisition starts a conversion immediately.
36 AGND power_in Must be tied to analog ground.
37 REF input Reference input voltage.
38 REFGND input Reference input analog ground.
39 INGND power_in Analog input ground.
40 INA(R) input Analog input; refer to Table I for input range configuration.
41 INB(2R) input Analog input; refer to Table I for input range configuration.
42 INC(4R) input Analog input; refer to Table I for input range configuration.
43 IND(4R) input Analog input; refer to Table I for input range configuration.
44 NC unconnected No connect.
45 NC unconnected No connect.
46 NC unconnected No connect.
47 NC unconnected No connect.
48 NC unconnected No connect.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package LQFP-48(7x7)
Category Data Converters
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Analog input voltage IND, INC, INB -11 30 V Analog Inputs IND, INC, INB 5
Ground voltage differences AGND, DGND, OGND -0.3 0.3 V ±0.3 V 5
Supply voltage AVDD, DVDD, OVDD -0.3 7 V 5
AVDD to DVDD, AVDD to OVDD -7 7 V ±7 V 5
DVDD to OVDD -0.3 7 V 5
Digital inputs -0.3 V -0.3 V to DVDD + 0.3 V 5
Internal power dissipation (LQFP) 700 mW Device in free air, 48-Lead LQFP 5
Junction temperature 150 °C 5
Storage temperature range -65 150 °C 5
Lead temperature (soldering 10 sec) 300 °C Soldering 10 sec 5
Thermal resistance junction to ambient θJA 91 °C/W 48-Lead LQFP, free air 5
Thermal resistance junction to case θJC 30 °C/W 48-Lead LQFP, free air 5
Operating temperature range -40 85 °C Specified operation, A grade 1
Bus relinquish time t13 15 ns Parallel interface modes 4
Data valid to BUSY LOW delay t11 20 ns Parallel interface modes 4
Bus access request to data valid t12 40 ns Parallel interface modes 4
External SCLK period t35 25 ns Slave serial interface modes 4
External SCLK HIGH t36 10 ns Slave serial interface modes 4
External SCLK LOW t37 10 ns Slave serial interface modes 4

CAD (KiCad official)

  • Symbol: AD7671ASTZRL
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: ad7671astzrl-etched.step / ad7671astzrl-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ad7671astzrl.step / ad7671astzrl.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (24 pp, sha256 3a149878740a1af1, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF