component
AD7671ASTZRL
Public Made by Adomby adom
Analog Devices Analog To Digital Converters (ADCs), LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
7747a12
AD7671ASTZRL
Analog Devices · Analog To Digital Converters (ADCs) · LQFP-48(7x7)
AD7671ASTZRL from Analog Devices, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AGND | power_in | Analog power ground pin. |
| 2 | AVDD | power_in | Input analog power pin, nominally 5 V. |
| 3 | NC | unconnected | No connect. |
| 4 | BYTESWAP | input | Parallel mode 8-/16-bit selection: when LOW the LSB is output on D[7:0] and the MSB on D[15:8]; when HIGH the LSB is on D[15:8] and the MSB on D[7:0]. |
| 5 | OB/2C | input | Straight binary/twos complement select: HIGH gives straight binary output, LOW inverts the MSB giving twos complement output. |
| 6 | WARP | input | Mode selection: when HIGH and IMPULSE LOW selects the fastest mode (maximum throughput, minimum conversion rate must be applied for full accuracy); when LOW full accuracy is maintained independent of conversion rate. |
| 7 | IMPULSE | input | Mode selection: when HIGH and WARP LOW selects a reduced power mode where power dissipation is approximately proportional to the sampling rate. |
| 8 | SER/PAR | input | Serial/parallel selection: LOW selects the parallel port, HIGH selects the serial interface mode with some data bus bits used as serial port. |
| 9 | D0 | output | Bit 0 of the parallel port data output bus; high impedance when SER/PAR is HIGH. |
| 10 | D1 | output | Bit 1 of the parallel port data output bus; high impedance when SER/PAR is HIGH. |
| 11 | D2/DIVSCLK[0] | bidirectional | Bit 2 of the parallel data bus when SER/PAR is LOW; when SER/PAR is HIGH, EXT/INT LOW and RDC/SDIN LOW it is an input that slows the internal serial clock, otherwise a high impedance output. |
| 12 | D3/DIVSCLK[1] | bidirectional | Bit 3 of the parallel data bus when SER/PAR is LOW; when SER/PAR is HIGH, EXT/INT LOW and RDC/SDIN LOW it is an input that slows the internal serial clock, otherwise a high impedance output. |
| 13 | D4/EXT/INT | bidirectional | Bit 4 of the parallel data bus when SER/PAR is LOW; when SER/PAR is HIGH it selects internal clock (LOW, master) or external SCLK gated by CS (HIGH, slave). |
| 14 | D5/INVSYNC | bidirectional | Bit 5 of the parallel data bus when SER/PAR is LOW; when SER/PAR is HIGH it selects SYNC active state (LOW: active HIGH, HIGH: active LOW). |
| 15 | D6/INVSCLK | bidirectional | Bit 6 of the parallel data bus when SER/PAR is LOW; when SER/PAR is HIGH it inverts the SCLK signal in both master and slave mode. |
| 16 | D7/RDC/SDIN | bidirectional | Bit 7 of the parallel data bus when SER/PAR is LOW; when SER/PAR is HIGH it is the external serial data input (daisy-chain, EXT/INT HIGH) or read mode select (EXT/INT LOW). |
| 17 | OGND | power_in | Input/output interface digital power ground. |
| 18 | OVDD | power_in | Input/output interface digital power, nominally at the same supply as the host interface (5 V or 3 V). |
| 19 | DVDD | power_in | Digital power, nominally 5 V. |
| 20 | DGND | power_in | Digital power ground. |
| 21 | D8/SDOUT | output | Bit 8 of the parallel data bus when SER/PAR is LOW; when SER/PAR is HIGH it is the serial data output, MSB first, synchronized to SCLK. |
| 22 | D9/SCLK | bidirectional | Bit 9 of the parallel data bus when SER/PAR is LOW; when SER/PAR is HIGH it is the serial data clock input or output depending on EXT/INT. |
| 23 | D10/SYNC | output | Bit 10 of the parallel data bus when SER/PAR is LOW; when SER/PAR is HIGH it is the frame synchronization output for the internal data clock, polarity set by INVSYNC. |
| 24 | D11/RDERROR | output | Bit 11 of the parallel data bus when SER/PAR is LOW; when SER/PAR and EXT/INT are HIGH it is the incomplete read error flag, pulsed HIGH when a slave-mode read is not complete at the next conversion. |
| 25 | D12 | output | Bit 12 of the parallel port data output bus; high impedance when SER/PAR is HIGH. |
| 26 | D13 | output | Bit 13 of the parallel port data output bus; high impedance when SER/PAR is HIGH. |
| 27 | D14 | output | Bit 14 of the parallel port data output bus; high impedance when SER/PAR is HIGH. |
| 28 | D15 | output | Bit 15 of the parallel port data output bus; high impedance when SER/PAR is HIGH. |
| 29 | BUSY | output | Busy output; goes HIGH when a conversion starts and stays HIGH until the conversion is complete and data is latched, falling edge usable as data-ready clock. |
| 30 | DGND | power_in | Must be tied to digital ground. |
| 31 | RD | input | Read data; when CS and RD are both LOW the parallel or serial output bus is enabled. |
| 32 | CS | input | Chip select; when CS and RD are both LOW the output bus is enabled, and CS also gates the external serial clock. |
| 33 | RESET | input | Reset input; a logic HIGH resets the AD7671 and aborts any current conversion, can be tied to DGND if unused. |
| 34 | PD | input | Power-down input; when HIGH power consumption is reduced and conversions are inhibited after the current one completes. |
| 35 | CNVST | input | Start conversion; a falling edge puts the sample-and-hold into hold and initiates a conversion, and in Impulse Mode holding it LOW at end of acquisition starts a conversion immediately. |
| 36 | AGND | power_in | Must be tied to analog ground. |
| 37 | REF | input | Reference input voltage. |
| 38 | REFGND | input | Reference input analog ground. |
| 39 | INGND | power_in | Analog input ground. |
| 40 | INA(R) | input | Analog input; refer to Table I for input range configuration. |
| 41 | INB(2R) | input | Analog input; refer to Table I for input range configuration. |
| 42 | INC(4R) | input | Analog input; refer to Table I for input range configuration. |
| 43 | IND(4R) | input | Analog input; refer to Table I for input range configuration. |
| 44 | NC | unconnected | No connect. |
| 45 | NC | unconnected | No connect. |
| 46 | NC | unconnected | No connect. |
| 47 | NC | unconnected | No connect. |
| 48 | NC | unconnected | No connect. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | LQFP-48(7x7) |
| Category | Data Converters |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Analog input voltage IND, INC, INB | -11 | 30 | V | Analog Inputs IND, INC, INB | 5 | ||
| Ground voltage differences AGND, DGND, OGND | -0.3 | 0.3 | V | ±0.3 V | 5 | ||
| Supply voltage AVDD, DVDD, OVDD | -0.3 | 7 | V | 5 | |||
| AVDD to DVDD, AVDD to OVDD | -7 | 7 | V | ±7 V | 5 | ||
| DVDD to OVDD | -0.3 | 7 | V | 5 | |||
| Digital inputs | -0.3 | V | -0.3 V to DVDD + 0.3 V | 5 | |||
| Internal power dissipation (LQFP) | 700 | mW | Device in free air, 48-Lead LQFP | 5 | |||
| Junction temperature | 150 | °C | 5 | ||||
| Storage temperature range | -65 | 150 | °C | 5 | |||
| Lead temperature (soldering 10 sec) | 300 | °C | Soldering 10 sec | 5 | |||
| Thermal resistance junction to ambient | θJA | 91 | °C/W | 48-Lead LQFP, free air | 5 | ||
| Thermal resistance junction to case | θJC | 30 | °C/W | 48-Lead LQFP, free air | 5 | ||
| Operating temperature range | -40 | 85 | °C | Specified operation, A grade | 1 | ||
| Bus relinquish time | t13 | 15 | ns | Parallel interface modes | 4 | ||
| Data valid to BUSY LOW delay | t11 | 20 | ns | Parallel interface modes | 4 | ||
| Bus access request to data valid | t12 | 40 | ns | Parallel interface modes | 4 | ||
| External SCLK period | t35 | 25 | ns | Slave serial interface modes | 4 | ||
| External SCLK HIGH | t36 | 10 | ns | Slave serial interface modes | 4 | ||
| External SCLK LOW | t37 | 10 | ns | Slave serial interface modes | 4 |
CAD (KiCad official)
- Symbol:
AD7671ASTZRL - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
ad7671astzrl-etched.step/ad7671astzrl-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad7671astzrl.step/ad7671astzrl.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (24 pp, sha256
3a149878740a1af1, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# AD7671ASTZRL
**Analog Devices** · Analog To Digital Converters (ADCs) · LQFP-48(7x7)
AD7671ASTZRL from Analog Devices, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AGND | power_in | Analog power ground pin. |
| 2 | AVDD | power_in | Input analog power pin, nominally 5 V. |
| 3 | NC | unconnected | No connect. |
| 4 | BYTESWAP | input | Parallel mode 8-/16-bit selection: when LOW the LSB is output on D[7:0] and the MSB on D[15:8]; when HIGH the LSB is on D[15:8] and the MSB on D[7:0]. |
| 5 | OB/2C | input | Straight binary/twos complement select: HIGH gives straight binary output, LOW inverts the MSB giving twos complement output. |
| 6 | WARP | input | Mode selection: when HIGH and IMPULSE LOW selects the fastest mode (maximum throughput, minimum conversion rate must be applied for full accuracy); when LOW full accuracy is maintained independent of conversion rate. |
| 7 | IMPULSE | input | Mode selection: when HIGH and WARP LOW selects a reduced power mode where power dissipation is approximately proportional to the sampling rate. |
| 8 | SER/PAR | input | Serial/parallel selection: LOW selects the parallel port, HIGH selects the serial interface mode with some data bus bits used as serial port. |
| 9 | D0 | output | Bit 0 of the parallel port data output bus; high impedance when SER/PAR is HIGH. |
| 10 | D1 | output | Bit 1 of the parallel port data output bus; high impedance when SER/PAR is HIGH. |
| 11 | D2/DIVSCLK[0] | bidirectional | Bit 2 of the parallel data bus when SER/PAR is LOW; when SER/PAR is HIGH, EXT/INT LOW and RDC/SDIN LOW it is an input that slows the internal serial clock, otherwise a high impedance output. |
| 12 | D3/DIVSCLK[1] | bidirectional | Bit 3 of the parallel data bus when SER/PAR is LOW; when SER/PAR is HIGH, EXT/INT LOW and RDC/SDIN LOW it is an input that slows the internal serial clock, otherwise a high impedance output. |
| 13 | D4/EXT/INT | bidirectional | Bit 4 of the parallel data bus when SER/PAR is LOW; when SER/PAR is HIGH it selects internal clock (LOW, master) or external SCLK gated by CS (HIGH, slave). |
| 14 | D5/INVSYNC | bidirectional | Bit 5 of the parallel data bus when SER/PAR is LOW; when SER/PAR is HIGH it selects SYNC active state (LOW: active HIGH, HIGH: active LOW). |
| 15 | D6/INVSCLK | bidirectional | Bit 6 of the parallel data bus when SER/PAR is LOW; when SER/PAR is HIGH it inverts the SCLK signal in both master and slave mode. |
| 16 | D7/RDC/SDIN | bidirectional | Bit 7 of the parallel data bus when SER/PAR is LOW; when SER/PAR is HIGH it is the external serial data input (daisy-chain, EXT/INT HIGH) or read mode select (EXT/INT LOW). |
| 17 | OGND | power_in | Input/output interface digital power ground. |
| 18 | OVDD | power_in | Input/output interface digital power, nominally at the same supply as the host interface (5 V or 3 V). |
| 19 | DVDD | power_in | Digital power, nominally 5 V. |
| 20 | DGND | power_in | Digital power ground. |
| 21 | D8/SDOUT | output | Bit 8 of the parallel data bus when SER/PAR is LOW; when SER/PAR is HIGH it is the serial data output, MSB first, synchronized to SCLK. |
| 22 | D9/SCLK | bidirectional | Bit 9 of the parallel data bus when SER/PAR is LOW; when SER/PAR is HIGH it is the serial data clock input or output depending on EXT/INT. |
| 23 | D10/SYNC | output | Bit 10 of the parallel data bus when SER/PAR is LOW; when SER/PAR is HIGH it is the frame synchronization output for the internal data clock, polarity set by INVSYNC. |
| 24 | D11/RDERROR | output | Bit 11 of the parallel data bus when SER/PAR is LOW; when SER/PAR and EXT/INT are HIGH it is the incomplete read error flag, pulsed HIGH when a slave-mode read is not complete at the next conversion. |
| 25 | D12 | output | Bit 12 of the parallel port data output bus; high impedance when SER/PAR is HIGH. |
| 26 | D13 | output | Bit 13 of the parallel port data output bus; high impedance when SER/PAR is HIGH. |
| 27 | D14 | output | Bit 14 of the parallel port data output bus; high impedance when SER/PAR is HIGH. |
| 28 | D15 | output | Bit 15 of the parallel port data output bus; high impedance when SER/PAR is HIGH. |
| 29 | BUSY | output | Busy output; goes HIGH when a conversion starts and stays HIGH until the conversion is complete and data is latched, falling edge usable as data-ready clock. |
| 30 | DGND | power_in | Must be tied to digital ground. |
| 31 | RD | input | Read data; when CS and RD are both LOW the parallel or serial output bus is enabled. |
| 32 | CS | input | Chip select; when CS and RD are both LOW the output bus is enabled, and CS also gates the external serial clock. |
| 33 | RESET | input | Reset input; a logic HIGH resets the AD7671 and aborts any current conversion, can be tied to DGND if unused. |
| 34 | PD | input | Power-down input; when HIGH power consumption is reduced and conversions are inhibited after the current one completes. |
| 35 | CNVST | input | Start conversion; a falling edge puts the sample-and-hold into hold and initiates a conversion, and in Impulse Mode holding it LOW at end of acquisition starts a conversion immediately. |
| 36 | AGND | power_in | Must be tied to analog ground. |
| 37 | REF | input | Reference input voltage. |
| 38 | REFGND | input | Reference input analog ground. |
| 39 | INGND | power_in | Analog input ground. |
| 40 | INA(R) | input | Analog input; refer to Table I for input range configuration. |
| 41 | INB(2R) | input | Analog input; refer to Table I for input range configuration. |
| 42 | INC(4R) | input | Analog input; refer to Table I for input range configuration. |
| 43 | IND(4R) | input | Analog input; refer to Table I for input range configuration. |
| 44 | NC | unconnected | No connect. |
| 45 | NC | unconnected | No connect. |
| 46 | NC | unconnected | No connect. |
| 47 | NC | unconnected | No connect. |
| 48 | NC | unconnected | No connect. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | LQFP-48(7x7) |
| Category | Data Converters |
| Pins | 48 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Analog input voltage IND, INC, INB | | -11 | | 30 | V | Analog Inputs IND, INC, INB | 5 |
| Ground voltage differences AGND, DGND, OGND | | -0.3 | | 0.3 | V | ±0.3 V | 5 |
| Supply voltage AVDD, DVDD, OVDD | | -0.3 | | 7 | V | | 5 |
| AVDD to DVDD, AVDD to OVDD | | -7 | | 7 | V | ±7 V | 5 |
| DVDD to OVDD | | -0.3 | | 7 | V | | 5 |
| Digital inputs | | -0.3 | | | V | -0.3 V to DVDD + 0.3 V | 5 |
| Internal power dissipation (LQFP) | | | | 700 | mW | Device in free air, 48-Lead LQFP | 5 |
| Junction temperature | | | | 150 | °C | | 5 |
| Storage temperature range | | -65 | | 150 | °C | | 5 |
| Lead temperature (soldering 10 sec) | | | | 300 | °C | Soldering 10 sec | 5 |
| Thermal resistance junction to ambient | θJA | | 91 | | °C/W | 48-Lead LQFP, free air | 5 |
| Thermal resistance junction to case | θJC | | 30 | | °C/W | 48-Lead LQFP, free air | 5 |
| Operating temperature range | | -40 | | 85 | °C | Specified operation, A grade | 1 |
| Bus relinquish time | t13 | | | 15 | ns | Parallel interface modes | 4 |
| Data valid to BUSY LOW delay | t11 | 20 | | | ns | Parallel interface modes | 4 |
| Bus access request to data valid | t12 | | | 40 | ns | Parallel interface modes | 4 |
| External SCLK period | t35 | 25 | | | ns | Slave serial interface modes | 4 |
| External SCLK HIGH | t36 | 10 | | | ns | Slave serial interface modes | 4 |
| External SCLK LOW | t37 | 10 | | | ns | Slave serial interface modes | 4 |
## CAD (KiCad official)
- Symbol: `AD7671ASTZRL`
- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`
- 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files: `ad7671astzrl-etched.step` / `ad7671astzrl-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ad7671astzrl.step` / `ad7671astzrl.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/AD7671.pdf) (24 pp, sha256 `3a149878740a1af1`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ad7671astzrl-datasheet.pdf)