main
Ray Publish 0.1.0 7747a12
{
  "slug": "ad7671astzrl",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Analog To Digital Converters (ADCs), LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "data converters",
    "ad7671astzrl",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ad7671astzrl.kicad_sym",
    "ad7671astzrl.kicad_mod",
    "ad7671astzrl.glb",
    "ad7671astzrl.step",
    "ad7671astzrl.lbr",
    "docs/hero.png",
    "docs/ad7671astzrl-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ad7671astzrl-hero.glb",
    "ad7671astzrl-hero.overlay.json"
  ],
  "component": {
    "mpn": "AD7671ASTZRL",
    "manufacturer": "Analog Devices",
    "package": "LQFP-48(7x7)",
    "pin_count": 48,
    "category": "Data Converters",
    "subcategory": "Analog To Digital Converters (ADCs)",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/AD7671.pdf",
    "parts": {
      "symbol": "ad7671astzrl.kicad_sym",
      "footprint": "ad7671astzrl.kicad_mod",
      "model_3d": "ad7671astzrl-hero.glb",
      "model_3d_plain": "ad7671astzrl.glb",
      "model_3d_step": "ad7671astzrl-etched.step",
      "model_3d_step_plain": "ad7671astzrl.step",
      "lbr": "ad7671astzrl.lbr"
    },
    "distributor_links": {
      "lcsc": "C651369",
      "digikey": "AD7671ASTZRLTR-ND",
      "mouser": "584-AD7671ASTZR"
    },
    "distributor_check": {
      "checked_at": "2026-11-13T18:28:26Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "AD7671ASTZRLTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-AD7671ASTZR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog power ground pin."
      },
      {
        "number": "2",
        "name": "AVDD",
        "type": "power_in",
        "description": "Input analog power pin, nominally 5 V."
      },
      {
        "number": "3",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect."
      },
      {
        "number": "4",
        "name": "BYTESWAP",
        "type": "input",
        "description": "Parallel mode 8-/16-bit selection: when LOW the LSB is output on D[7:0] and the MSB on D[15:8]; when HIGH the LSB is on D[15:8] and the MSB on D[7:0]."
      },
      {
        "number": "5",
        "name": "OB/2C",
        "type": "input",
        "description": "Straight binary/twos complement select: HIGH gives straight binary output, LOW inverts the MSB giving twos complement output."
      },
      {
        "number": "6",
        "name": "WARP",
        "type": "input",
        "description": "Mode selection: when HIGH and IMPULSE LOW selects the fastest mode (maximum throughput, minimum conversion rate must be applied for full accuracy); when LOW full accuracy is maintained independent of conversion rate."
      },
      {
        "number": "7",
        "name": "IMPULSE",
        "type": "input",
        "description": "Mode selection: when HIGH and WARP LOW selects a reduced power mode where power dissipation is approximately proportional to the sampling rate."
      },
      {
        "number": "8",
        "name": "SER/PAR",
        "type": "input",
        "description": "Serial/parallel selection: LOW selects the parallel port, HIGH selects the serial interface mode with some data bus bits used as serial port."
      },
      {
        "number": "9",
        "name": "D0",
        "type": "output",
        "description": "Bit 0 of the parallel port data output bus; high impedance when SER/PAR is HIGH."
      },
      {
        "number": "10",
        "name": "D1",
        "type": "output",
        "description": "Bit 1 of the parallel port data output bus; high impedance when SER/PAR is HIGH."
      },
      {
        "number": "11",
        "name": "D2/DIVSCLK[0]",
        "type": "bidirectional",
        "description": "Bit 2 of the parallel data bus when SER/PAR is LOW; when SER/PAR is HIGH, EXT/INT LOW and RDC/SDIN LOW it is an input that slows the internal serial clock, otherwise a high impedance output."
      },
      {
        "number": "12",
        "name": "D3/DIVSCLK[1]",
        "type": "bidirectional",
        "description": "Bit 3 of the parallel data bus when SER/PAR is LOW; when SER/PAR is HIGH, EXT/INT LOW and RDC/SDIN LOW it is an input that slows the internal serial clock, otherwise a high impedance output."
      },
      {
        "number": "13",
        "name": "D4/EXT/INT",
        "type": "bidirectional",
        "description": "Bit 4 of the parallel data bus when SER/PAR is LOW; when SER/PAR is HIGH it selects internal clock (LOW, master) or external SCLK gated by CS (HIGH, slave)."
      },
      {
        "number": "14",
        "name": "D5/INVSYNC",
        "type": "bidirectional",
        "description": "Bit 5 of the parallel data bus when SER/PAR is LOW; when SER/PAR is HIGH it selects SYNC active state (LOW: active HIGH, HIGH: active LOW)."
      },
      {
        "number": "15",
        "name": "D6/INVSCLK",
        "type": "bidirectional",
        "description": "Bit 6 of the parallel data bus when SER/PAR is LOW; when SER/PAR is HIGH it inverts the SCLK signal in both master and slave mode."
      },
      {
        "number": "16",
        "name": "D7/RDC/SDIN",
        "type": "bidirectional",
        "description": "Bit 7 of the parallel data bus when SER/PAR is LOW; when SER/PAR is HIGH it is the external serial data input (daisy-chain, EXT/INT HIGH) or read mode select (EXT/INT LOW)."
      },
      {
        "number": "17",
        "name": "OGND",
        "type": "power_in",
        "description": "Input/output interface digital power ground."
      },
      {
        "number": "18",
        "name": "OVDD",
        "type": "power_in",
        "description": "Input/output interface digital power, nominally at the same supply as the host interface (5 V or 3 V)."
      },
      {
        "number": "19",
        "name": "DVDD",
        "type": "power_in",
        "description": "Digital power, nominally 5 V."
      },
      {
        "number": "20",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital power ground."
      },
      {
        "number": "21",
        "name": "D8/SDOUT",
        "type": "output",
        "description": "Bit 8 of the parallel data bus when SER/PAR is LOW; when SER/PAR is HIGH it is the serial data output, MSB first, synchronized to SCLK."
      },
      {
        "number": "22",
        "name": "D9/SCLK",
        "type": "bidirectional",
        "description": "Bit 9 of the parallel data bus when SER/PAR is LOW; when SER/PAR is HIGH it is the serial data clock input or output depending on EXT/INT."
      },
      {
        "number": "23",
        "name": "D10/SYNC",
        "type": "output",
        "description": "Bit 10 of the parallel data bus when SER/PAR is LOW; when SER/PAR is HIGH it is the frame synchronization output for the internal data clock, polarity set by INVSYNC."
      },
      {
        "number": "24",
        "name": "D11/RDERROR",
        "type": "output",
        "description": "Bit 11 of the parallel data bus when SER/PAR is LOW; when SER/PAR and EXT/INT are HIGH it is the incomplete read error flag, pulsed HIGH when a slave-mode read is not complete at the next conversion."
      },
      {
        "number": "25",
        "name": "D12",
        "type": "output",
        "description": "Bit 12 of the parallel port data output bus; high impedance when SER/PAR is HIGH."
      },
      {
        "number": "26",
        "name": "D13",
        "type": "output",
        "description": "Bit 13 of the parallel port data output bus; high impedance when SER/PAR is HIGH."
      },
      {
        "number": "27",
        "name": "D14",
        "type": "output",
        "description": "Bit 14 of the parallel port data output bus; high impedance when SER/PAR is HIGH."
      },
      {
        "number": "28",
        "name": "D15",
        "type": "output",
        "description": "Bit 15 of the parallel port data output bus; high impedance when SER/PAR is HIGH."
      },
      {
        "number": "29",
        "name": "BUSY",
        "type": "output",
        "description": "Busy output; goes HIGH when a conversion starts and stays HIGH until the conversion is complete and data is latched, falling edge usable as data-ready clock."
      },
      {
        "number": "30",
        "name": "DGND",
        "type": "power_in",
        "description": "Must be tied to digital ground."
      },
      {
        "number": "31",
        "name": "RD",
        "type": "input",
        "description": "Read data; when CS and RD are both LOW the parallel or serial output bus is enabled."
      },
      {
        "number": "32",
        "name": "CS",
        "type": "input",
        "description": "Chip select; when CS and RD are both LOW the output bus is enabled, and CS also gates the external serial clock."
      },
      {
        "number": "33",
        "name": "RESET",
        "type": "input",
        "description": "Reset input; a logic HIGH resets the AD7671 and aborts any current conversion, can be tied to DGND if unused."
      },
      {
        "number": "34",
        "name": "PD",
        "type": "input",
        "description": "Power-down input; when HIGH power consumption is reduced and conversions are inhibited after the current one completes."
      },
      {
        "number": "35",
        "name": "CNVST",
        "type": "input",
        "description": "Start conversion; a falling edge puts the sample-and-hold into hold and initiates a conversion, and in Impulse Mode holding it LOW at end of acquisition starts a conversion immediately."
      },
      {
        "number": "36",
        "name": "AGND",
        "type": "power_in",
        "description": "Must be tied to analog ground."
      },
      {
        "number": "37",
        "name": "REF",
        "type": "input",
        "description": "Reference input voltage."
      },
      {
        "number": "38",
        "name": "REFGND",
        "type": "input",
        "description": "Reference input analog ground."
      },
      {
        "number": "39",
        "name": "INGND",
        "type": "power_in",
        "description": "Analog input ground."
      },
      {
        "number": "40",
        "name": "INA(R)",
        "type": "input",
        "description": "Analog input; refer to Table I for input range configuration."
      },
      {
        "number": "41",
        "name": "INB(2R)",
        "type": "input",
        "description": "Analog input; refer to Table I for input range configuration."
      },
      {
        "number": "42",
        "name": "INC(4R)",
        "type": "input",
        "description": "Analog input; refer to Table I for input range configuration."
      },
      {
        "number": "43",
        "name": "IND(4R)",
        "type": "input",
        "description": "Analog input; refer to Table I for input range configuration."
      },
      {
        "number": "44",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect."
      },
      {
        "number": "45",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect."
      },
      {
        "number": "46",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect."
      },
      {
        "number": "47",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect."
      },
      {
        "number": "48",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pins 40-43 INA/INB/INC/IND mapping to pin numbers inferred from the table order '40, 41, 42, 43 INA,; Pin types for analog pins (REF, REFGND, INGND) and mixed-function pins are chosen from datasheet typ; D3/DIVSCLK[1] on pin 12 is taken from the pin diagram; the table groups pins 11-12 as D[2:3]."
        ],
        "pages_sent": 10,
        "cost_usd": 0.2663,
        "at": "2026-11-13T18:28:15"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/AD7671.pdf",
        "pages": 24,
        "sha256": "3a149878740a1af1",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 48,
        "described": 48,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ad7671astzrl.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9.0,
          9.0,
          1.5
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "9dea352d93177c2904afd7d7b68ea8855ce1ab691f69f8b3e13655600514b6bf",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ad7671astzrl-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9.0,
          9.0,
          1.5
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b918f0a31540bc12021fe29d089efde7bd73b7465f2ae7c513d4fd939943eb82",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "ST-48",
      "source_page": 22,
      "D": {
        "nom_mm": 7.0,
        "range_mm": [
          6.8,
          7.2
        ]
      },
      "E1": {
        "nom_mm": 7.0,
        "range_mm": [
          6.8,
          7.2
        ]
      },
      "E": {
        "nom_mm": 9.0,
        "range_mm": [
          8.8,
          9.2
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.6,
        "range_mm": [
          null,
          1.6
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "ad7671astzrl.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}