main
Ray Publish 0.1.0 506a3da
{
  "slug": "ad7621astz",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Analog To Digital Converters (ADCs), LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "data converters",
    "ad7621astz",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ad7621astz.kicad_sym",
    "ad7621astz.kicad_mod",
    "ad7621astz.glb",
    "ad7621astz.step",
    "ad7621astz.lbr",
    "docs/hero.png",
    "docs/ad7621astz-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ad7621astz-hero.glb",
    "ad7621astz-hero.overlay.json"
  ],
  "component": {
    "mpn": "AD7621ASTZ",
    "manufacturer": "Analog Devices",
    "package": "LQFP-48(7x7)",
    "pin_count": 48,
    "category": "Data Converters",
    "subcategory": "Analog To Digital Converters (ADCs)",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/AD7621.pdf",
    "parts": {
      "symbol": "ad7621astz.kicad_sym",
      "footprint": "ad7621astz.kicad_mod",
      "model_3d": "ad7621astz-hero.glb",
      "model_3d_plain": "ad7621astz.glb",
      "model_3d_step": "ad7621astz-etched.step",
      "model_3d_step_plain": "ad7621astz.step",
      "lbr": "ad7621astz.lbr"
    },
    "distributor_links": {
      "lcsc": "C514240",
      "digikey": "505-AD7621ASTZ-ND",
      "mouser": "584-AD7621ASTZ"
    },
    "distributor_check": {
      "checked_at": "2026-11-13T21:37:08Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-AD7621ASTZ-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-AD7621ASTZ",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog power ground pin."
      },
      {
        "number": "2",
        "name": "AVDD",
        "type": "power_in",
        "description": "Input analog power pin, nominally 2.5 V."
      },
      {
        "number": "3",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect."
      },
      {
        "number": "4",
        "name": "BYTESWAP",
        "type": "input",
        "description": "Parallel mode selection (8-bit/16-bit): when high the LSB is output on D[15:8] and the MSB on D[7:0], when low the LSB is on D[7:0] and the MSB on D[15:8]."
      },
      {
        "number": "5",
        "name": "OB/2C",
        "type": "input",
        "description": "Straight binary/binary twos complement output select: high gives straight binary, low inverts the MSB for twos complement output."
      },
      {
        "number": "6",
        "name": "WARP",
        "type": "input",
        "description": "Conversion mode selection: WARP high with IMPULSE high selects wideband mode, WARP high with IMPULSE low selects warp mode, and WARP low with IMPULSE low selects normal mode."
      },
      {
        "number": "7",
        "name": "IMPULSE",
        "type": "input",
        "description": "Conversion mode selection: IMPULSE high with WARP low selects impulse mode, a reduced power mode with power approximately proportional to sampling rate."
      },
      {
        "number": "8",
        "name": "SER/PAR",
        "type": "input",
        "description": "Serial/parallel selection input: high selects the serial interface, low selects the parallel port."
      },
      {
        "number": "9",
        "name": "D0",
        "type": "output",
        "description": "Bit 0 of the parallel port data output bus."
      },
      {
        "number": "10",
        "name": "D1",
        "type": "output",
        "description": "Bit 1 of the parallel port data output bus."
      },
      {
        "number": "11",
        "name": "D2/DIVSCLK[0]",
        "type": "bidirectional",
        "description": "Bit 2 of the parallel data output bus when SER/PAR is low; when SER/PAR is high, serial clock division selection input (otherwise high-impedance output in other serial modes)."
      },
      {
        "number": "12",
        "name": "D3/DIVSCLK[1]",
        "type": "bidirectional",
        "description": "Bit 3 of the parallel data output bus when SER/PAR is low; when SER/PAR is high, serial clock division selection input used to slow the internal serial clock in serial master read-after-convert mode."
      },
      {
        "number": "13",
        "name": "D4/EXT/INT",
        "type": "bidirectional",
        "description": "Bit 4 of the parallel data output bus when SER/PAR is low; when SER/PAR is high, selects internal (low, master) or external (high, slave) serial data clock."
      },
      {
        "number": "14",
        "name": "D5/INVSYNC",
        "type": "bidirectional",
        "description": "Bit 5 of the parallel data output bus when SER/PAR is low; when SER/PAR is high in serial master mode, selects SYNC active high (low) or active low (high)."
      },
      {
        "number": "15",
        "name": "D6/INVSCLK",
        "type": "bidirectional",
        "description": "Bit 6 of the parallel data output bus when SER/PAR is low; in all serial modes, inverts the SCLK signal."
      },
      {
        "number": "16",
        "name": "D7/RDC/SDIN",
        "type": "bidirectional",
        "description": "Bit 7 of the parallel data output bus; in serial master mode selects read during convert (RDC high) or read after convert (low), and in serial slave mode is the SDIN daisy-chain data input."
      },
      {
        "number": "17",
        "name": "OGND",
        "type": "power_in",
        "description": "Input/output interface digital power ground."
      },
      {
        "number": "18",
        "name": "OVDD",
        "type": "power_in",
        "description": "Input/output interface digital power, nominally at the same supply as the host interface (2.5 V or 3 V)."
      },
      {
        "number": "19",
        "name": "DVDD",
        "type": "power_in",
        "description": "Digital power, nominally 2.5 V."
      },
      {
        "number": "20",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital power ground."
      },
      {
        "number": "21",
        "name": "D8/SDOUT",
        "type": "output",
        "description": "Bit 8 of the parallel data output bus when SER/PAR is low; when SER/PAR is high, serial data output, MSB first, synchronized to SCLK."
      },
      {
        "number": "22",
        "name": "D9/SCLK",
        "type": "bidirectional",
        "description": "Bit 9 of the parallel data output bus when SER/PAR is low; when SER/PAR is high, serial data clock input or output depending on EXT/INT."
      },
      {
        "number": "23",
        "name": "D10/SYNC",
        "type": "output",
        "description": "Bit 10 of the parallel data output bus when SER/PAR is low; in serial master mode, frame synchronization output for use with the internal data clock."
      },
      {
        "number": "24",
        "name": "D11/RDERROR",
        "type": "output",
        "description": "Bit 11 of the parallel data output bus when SER/PAR is low; in serial slave mode, incomplete read error flag pulsed high if a read is not completed before the current conversion completes."
      },
      {
        "number": "25",
        "name": "D12",
        "type": "output",
        "description": "Bit 12 of the parallel port data output bus."
      },
      {
        "number": "26",
        "name": "D13",
        "type": "output",
        "description": "Bit 13 of the parallel port data output bus."
      },
      {
        "number": "27",
        "name": "D14",
        "type": "output",
        "description": "Bit 14 of the parallel port data output bus."
      },
      {
        "number": "28",
        "name": "D15",
        "type": "output",
        "description": "Bit 15 of the parallel port data output bus."
      },
      {
        "number": "29",
        "name": "BUSY",
        "type": "output",
        "description": "Busy output that goes high when a conversion starts and stays high until the data is latched; its falling edge can be used as a data ready clock."
      },
      {
        "number": "30",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital power ground."
      },
      {
        "number": "31",
        "name": "RD",
        "type": "input",
        "description": "Read data: when CS and RD are both low, the parallel or serial output bus is enabled."
      },
      {
        "number": "32",
        "name": "CS",
        "type": "input",
        "description": "Chip select: when CS and RD are both low the output bus is enabled, and CS also gates the external clock in slave serial mode."
      },
      {
        "number": "33",
        "name": "RESET",
        "type": "input",
        "description": "Reset input: when high resets the AD7621 and aborts any conversion, falling edge enables calibration mode indicated by BUSY pulsing high; can be tied to DGND if unused."
      },
      {
        "number": "34",
        "name": "PD",
        "type": "input",
        "description": "Power-down input: when high powers down the ADC, reducing power consumption and inhibiting conversions after the current one completes."
      },
      {
        "number": "35",
        "name": "CNVST",
        "type": "input",
        "description": "Conversion start: a falling edge puts the internal sample-and-hold into hold and initiates a conversion."
      },
      {
        "number": "36",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog power ground pin."
      },
      {
        "number": "37",
        "name": "REF",
        "type": "bidirectional",
        "description": "Reference output/input: produces 2.048 V when the internal reference and buffer are enabled, or accepts an external reference up to AVDD when they are disabled; decoupling is required in both cases."
      },
      {
        "number": "38",
        "name": "REFGND",
        "type": "input",
        "description": "Reference input analog ground."
      },
      {
        "number": "39",
        "name": "IN−",
        "type": "input",
        "description": "Differential negative analog input."
      },
      {
        "number": "40",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect."
      },
      {
        "number": "41",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog power ground pin."
      },
      {
        "number": "42",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog power ground pin."
      },
      {
        "number": "43",
        "name": "IN+",
        "type": "input",
        "description": "Differential positive analog input."
      },
      {
        "number": "44",
        "name": "AVDD",
        "type": "power_in",
        "description": "Input analog power pin, nominally 2.5 V."
      },
      {
        "number": "45",
        "name": "TEMP",
        "type": "output",
        "description": "Temperature sensor analog output."
      },
      {
        "number": "46",
        "name": "REFBUFIN",
        "type": "bidirectional",
        "description": "Internal reference output (1.2 V typical bandgap, needs external decoupling) or reference buffer input, where 1.2 V applied produces 2.048 V on REF."
      },
      {
        "number": "47",
        "name": "PDREF",
        "type": "input",
        "description": "Internal reference power-down input: low enables the internal reference, high powers it down so an external reference must be used."
      },
      {
        "number": "48",
        "name": "PDBUF",
        "type": "input",
        "description": "Internal reference buffer power-down input: low enables the buffer (must be low when using the internal reference), high powers it down."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin Function Descriptions table is shared by the LQFP and LFCSP; the LQFP pin numbers were taken fro; Pin types for REFGND, D8 and D10 are inferred from the datasheet's type codes (AI, DO) and the dual-"
        ],
        "pages_sent": 11,
        "cost_usd": 0.285,
        "at": "2026-11-13T21:36:57"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/AD7621.pdf",
        "pages": 32,
        "sha256": "e95a22543e657799",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 48,
        "described": 48,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ad7621astz.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9.0,
          9.0,
          1.5
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "9dea352d93177c2904afd7d7b68ea8855ce1ab691f69f8b3e13655600514b6bf",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ad7621astz-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9.0,
          9.0,
          1.5
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "68d9abc406c6670647532683d8d63f6c5178c20eaec53ff5401f75f90b36f0d5",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "ST-48",
      "source_page": 28,
      "D": {
        "nom_mm": 7.0,
        "range_mm": [
          null,
          null
        ]
      },
      "E1": {
        "nom_mm": 7.0,
        "range_mm": [
          null,
          null
        ]
      },
      "E": {
        "nom_mm": 9.0,
        "range_mm": [
          null,
          null
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.6,
        "range_mm": [
          null,
          1.6
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "ad7621astz.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}