main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ad7621astz: viewers · Ray
ad7621astz-etched.glb ad7621astz: factory component page (tier=mfr) · Ray
ad7621astz-etched.step ad7621astz: factory component page (tier=mfr) · Ray
ad7621astz-hero.glb ad7621astz: hero GLB from the etched model (keeps the MPN mark) · Ray
ad7621astz-hero.overlay.json ad7621astz: hero GLB from the etched model (keeps the MPN mark) · Ray
ad7621astz.glb Publish 0.1.0 · Ray
ad7621astz.kicad_mod Publish 0.1.0 · Ray
ad7621astz.kicad_sym Publish 0.1.0 · Ray
ad7621astz.lbr Publish 0.1.0 · Ray
ad7621astz.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 48 pins · Ray

AD7621ASTZ

Analog Devices · Analog To Digital Converters (ADCs) · LQFP-48(7x7)

AD7621ASTZ from Analog Devices, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 AGND power_in Analog power ground pin.
2 AVDD power_in Input analog power pin, nominally 2.5 V.
3 NC unconnected No connect.
4 BYTESWAP input Parallel mode selection (8-bit/16-bit): when high the LSB is output on D[15:8] and the MSB on D[7:0], when low the LSB is on D[7:0] and the MSB on D[15:8].
5 OB/2C input Straight binary/binary twos complement output select: high gives straight binary, low inverts the MSB for twos complement output.
6 WARP input Conversion mode selection: WARP high with IMPULSE high selects wideband mode, WARP high with IMPULSE low selects warp mode, and WARP low with IMPULSE low selects normal mode.
7 IMPULSE input Conversion mode selection: IMPULSE high with WARP low selects impulse mode, a reduced power mode with power approximately proportional to sampling rate.
8 SER/PAR input Serial/parallel selection input: high selects the serial interface, low selects the parallel port.
9 D0 output Bit 0 of the parallel port data output bus.
10 D1 output Bit 1 of the parallel port data output bus.
11 D2/DIVSCLK[0] bidirectional Bit 2 of the parallel data output bus when SER/PAR is low; when SER/PAR is high, serial clock division selection input (otherwise high-impedance output in other serial modes).
12 D3/DIVSCLK[1] bidirectional Bit 3 of the parallel data output bus when SER/PAR is low; when SER/PAR is high, serial clock division selection input used to slow the internal serial clock in serial master read-after-convert mode.
13 D4/EXT/INT bidirectional Bit 4 of the parallel data output bus when SER/PAR is low; when SER/PAR is high, selects internal (low, master) or external (high, slave) serial data clock.
14 D5/INVSYNC bidirectional Bit 5 of the parallel data output bus when SER/PAR is low; when SER/PAR is high in serial master mode, selects SYNC active high (low) or active low (high).
15 D6/INVSCLK bidirectional Bit 6 of the parallel data output bus when SER/PAR is low; in all serial modes, inverts the SCLK signal.
16 D7/RDC/SDIN bidirectional Bit 7 of the parallel data output bus; in serial master mode selects read during convert (RDC high) or read after convert (low), and in serial slave mode is the SDIN daisy-chain data input.
17 OGND power_in Input/output interface digital power ground.
18 OVDD power_in Input/output interface digital power, nominally at the same supply as the host interface (2.5 V or 3 V).
19 DVDD power_in Digital power, nominally 2.5 V.
20 DGND power_in Digital power ground.
21 D8/SDOUT output Bit 8 of the parallel data output bus when SER/PAR is low; when SER/PAR is high, serial data output, MSB first, synchronized to SCLK.
22 D9/SCLK bidirectional Bit 9 of the parallel data output bus when SER/PAR is low; when SER/PAR is high, serial data clock input or output depending on EXT/INT.
23 D10/SYNC output Bit 10 of the parallel data output bus when SER/PAR is low; in serial master mode, frame synchronization output for use with the internal data clock.
24 D11/RDERROR output Bit 11 of the parallel data output bus when SER/PAR is low; in serial slave mode, incomplete read error flag pulsed high if a read is not completed before the current conversion completes.
25 D12 output Bit 12 of the parallel port data output bus.
26 D13 output Bit 13 of the parallel port data output bus.
27 D14 output Bit 14 of the parallel port data output bus.
28 D15 output Bit 15 of the parallel port data output bus.
29 BUSY output Busy output that goes high when a conversion starts and stays high until the data is latched; its falling edge can be used as a data ready clock.
30 DGND power_in Digital power ground.
31 RD input Read data: when CS and RD are both low, the parallel or serial output bus is enabled.
32 CS input Chip select: when CS and RD are both low the output bus is enabled, and CS also gates the external clock in slave serial mode.
33 RESET input Reset input: when high resets the AD7621 and aborts any conversion, falling edge enables calibration mode indicated by BUSY pulsing high; can be tied to DGND if unused.
34 PD input Power-down input: when high powers down the ADC, reducing power consumption and inhibiting conversions after the current one completes.
35 CNVST input Conversion start: a falling edge puts the internal sample-and-hold into hold and initiates a conversion.
36 AGND power_in Analog power ground pin.
37 REF bidirectional Reference output/input: produces 2.048 V when the internal reference and buffer are enabled, or accepts an external reference up to AVDD when they are disabled; decoupling is required in both cases.
38 REFGND input Reference input analog ground.
39 IN− input Differential negative analog input.
40 NC unconnected No connect.
41 AGND power_in Analog power ground pin.
42 AGND power_in Analog power ground pin.
43 IN+ input Differential positive analog input.
44 AVDD power_in Input analog power pin, nominally 2.5 V.
45 TEMP output Temperature sensor analog output.
46 REFBUFIN bidirectional Internal reference output (1.2 V typical bandgap, needs external decoupling) or reference buffer input, where 1.2 V applied produces 2.048 V on REF.
47 PDREF input Internal reference power-down input: low enables the internal reference, high powers it down so an external reference must be used.
48 PDBUF input Internal reference buffer power-down input: low enables the buffer (must be low when using the internal reference), high powers it down.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package LQFP-48(7x7)
Category Data Converters
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Integral Linearity Error INL -2 1 2 LSB VREF = 2.048 V, PDREF = high 3
Differential Linearity Error DNL -1 2 LSB VREF = 2.048 V, PDREF = high 3
Zero Error -30 30 LSB TMIN to TMAX 3
Gain Error -0.38 0.38 % of FSR TMIN to TMAX 3
Signal-to-Noise SNR 88 90 dB fIN = 20 kHz, VREF = 2.5 V 3
Signal-to-Noise SNR 86 88 dB fIN = 20 kHz, VREF = 2.048 V 3
Signal-to-(Noise + Distortion) SINAD 87.5 89.8 dB fIN = 20 kHz, VREF = 2.5 V 3
Internal Reference Output Voltage REF 2.038 2.048 2.058 V REF @ 25°C, PDREF = PDBUF = low 3
Operating Input Voltage -0.1 V VIN+, VIN− to AGND 3
Analog Input CMRR 55 dB fIN = 100 kHz 3
Throughput Rate (warp) 0.001 3 MSPS Wideband warp, warp modes 3
Throughput Rate (normal) 0 2 MSPS Normal mode 3
Throughput Rate (impulse) 0 1.25 MSPS Impulse mode 3
External Reference Voltage Range REF 1.8 2.048 2.63 V PDREF = PDBUF = high; max printed as AVDD 4
REFBUFIN Input Voltage Range 1.05 1.2 1.3 V PDREF = high, PDBUF = low 4
Logic Input Low Voltage VIL -0.3 0.6 V 4
Logic Input High Voltage VIH 1.7 5.25 V 4
Input Leakage Low IIL -1 1 μA 4
Input Leakage High IIH -1 1 μA 4
Output Low Voltage VOL 0.4 V ISINK = 500 μA 4
Output High Voltage VOH 2 V ISOURCE = -500 μA; printed OVDD − 0.3 V 4
Analog Supply Voltage AVDD 2.37 2.5 2.63 V Specified performance 4
Digital Supply Voltage DVDD 2.37 2.5 2.63 V Specified performance 4
Interface Supply Voltage OVDD 2.3 3.6 V 4
Power Dissipation, with internal reference 70 86 mW 3 MSPS throughput 4
Power Dissipation, without internal reference 65 80 mW 3 MSPS throughput 4
Power Dissipation, with internal reference 42 55 mW 1.25 MSPS throughput 4
Power Dissipation, without internal reference 37 50 mW 1.25 MSPS throughput 4
Power Dissipation in Power-Down Mode 600 μW PD = high 4
Specified Temperature Range -40 85 °C TMIN to TMAX 4
Convert Pulse Width t1 15 70 ns 5
CNVST Low to BUSY High Delay t3 23 ns 5
RESET Pulse Width t9 15 ns 5
External SCLK Period t35 12.5 ns 6
Analog Inputs to AGND -0.3 V IN+, IN−, REF, REFBUFIN, TEMP, INGND, REFGND; printed AVDD + 0.3 V to AGND − 0.3 V 7
Supply Voltage AVDD, DVDD -0.3 2.7 V 7
Supply Voltage OVDD -0.3 3.8 V 7
Digital Inputs -0.3 5.5 V 7
PDREF, PDBUF current -20 20 mA printed ±20 mA 7
Internal Power Dissipation 700 mW 48-Lead LQFP, free air 7
Junction Temperature 125 °C 7
Storage Temperature Range -65 125 °C 7
Thermal Resistance Junction to Ambient θJA 91 °C/W 48-Lead LQFP, free air 7
Thermal Resistance Junction to Case θJC 30 °C/W 48-Lead LQFP, free air 7
Resolution 16 Bits 3
Transition Noise 0.69 LSB VREF = 2.5 V 3
Zero Error Temperature Drift 1 ppm/°C printed ±1 3
Gain Error Temperature Drift 2 ppm/°C printed ±2 3
Internal Reference Temperature Drift 7 ppm/°C -40°C to +85°C, printed ±7 3
Operating Current AVDD 25.2 mA 3 MSPS throughput, with internal reference 4

CAD (KiCad official)

  • Symbol: AD7621ASTZ
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: ad7621astz-etched.step / ad7621astz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ad7621astz.step / ad7621astz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (32 pp, sha256 e95a22543e657799, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF