main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ad7612bstz: viewers · Ray
ad7612bstz-etched.glb ad7612bstz: factory component page (tier=mfr) · Ray
ad7612bstz-etched.step ad7612bstz: factory component page (tier=mfr) · Ray
ad7612bstz-hero.glb ad7612bstz: hero GLB from the etched model (keeps the MPN mark) · Ray
ad7612bstz-hero.overlay.json ad7612bstz: hero GLB from the etched model (keeps the MPN mark) · Ray
ad7612bstz.glb Publish 0.1.0 · Ray
ad7612bstz.kicad_mod Publish 0.1.0 · Ray
ad7612bstz.kicad_sym Publish 0.1.0 · Ray
ad7612bstz.lbr Publish 0.1.0 · Ray
ad7612bstz.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 48 pins · Ray

AD7612BSTZ

Analog Devices · Analog To Digital Converters (ADCs) · LQFP-48(7x7)

AD7612BSTZ from Analog Devices, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 AGND power_in Analog power ground pin and ground reference for all analog I/O, which should be connected to the analog ground plane and kept at the same potential as AGND, DGND and OGND.
2 AVDD power_in Analog power supply, nominally 4.75 V to 5.25 V, decoupled with 10 μF and 100 nF capacitors.
3 AGND power_in Analog power ground pin and ground reference for all analog I/O, which should be connected to the analog ground plane and kept at the same potential as AGND, DGND and OGND.
4 BYTESWAP input Parallel mode 8/16-bit byte-order select: when high the LSB is output on D[15:8] and the MSB on D[7:0], and when low the LSB is output on D[7:0] and the MSB on D[15:8].
5 OB/2C input Output coding select: when high the output is straight binary, and when low the MSB is inverted to give twos complement output (this pin is a don't-care in serial software configuration mode).
6 WARP input Conversion mode select used with IMPULSE: WARP/IMPULSE low/low is normal, low/high is impulse, high/low is warp and high/high is normal (don't-care in serial software configuration mode).
7 IMPULSE input Conversion mode select used with WARP as defined for pin 6 (don't-care in serial software configuration mode).
8 SER/PAR input Serial/parallel selection: when low the parallel mode is selected, and when high the serial modes are selected with some data bus bits used as the serial port.
9 D0 output Bit 0 of the parallel port data output bus, which is always an output regardless of the SER/PAR state.
10 D1 output Bit 1 of the parallel port data output bus, which is always an output regardless of the SER/PAR state.
11 D2/DIVSCLK[0] bidirectional Bit 2 of the parallel data bus; in serial master read-after-convert mode it is a serial data division clock select input that can slow the internal SDCLK, and is a high-impedance output in other serial modes.
12 D3/DIVSCLK[1] bidirectional Bit 3 of the parallel data bus; in serial master read-after-convert mode it is a serial data division clock select input that can slow the internal SDCLK, and is a high-impedance output in other serial modes.
13 D4/EXT/INT bidirectional Bit 4 of the parallel data bus; in serial mode EXT/INT low selects the internal master serial clock and EXT/INT high selects an external slave clock on SDCLK.
14 D5/INVSYNC bidirectional Bit 5 of the parallel data bus; in serial master mode INVSYNC low makes SYNC active high and INVSYNC high makes SYNC active low.
15 D6/INVSCLK bidirectional Bit 6 of the parallel data bus; in all serial modes INVSCLK low uses the rising edge and INVSCLK high uses the falling edge of SDCLK/SCCLK.
16 D7/RDC/SDIN bidirectional Bit 7 of the parallel data bus; in serial master mode RDC low reads the current result after conversion and RDC high reads the previous result during conversion, while in serial slave mode it is the SDIN daisy-chain data input.
17 OGND power_in Input/output interface digital power ground and ground reference for the digital outputs, ideally at the same potential as AGND and DGND.
18 OVDD power_in Input/output interface digital power, nominally at the host interface supply of 2.5 V, 3 V or 5 V, decoupled with 10 μF and 100 nF capacitors.
19 DVDD power_in Digital power supply, nominally 4.75 V to 5.25 V, decoupled with 10 μF and 100 nF capacitors, and can be supplied from AVDD.
20 DGND power_in Digital power ground and ground reference for the digital outputs, which should be connected to system digital ground ideally at the same potential as AGND and OGND.
21 D8/SDOUT output Bit 8 of the parallel data output bus; in all serial modes it is the serial data output, MSB first, synchronized to SDCLK.
22 D9/SDCLK bidirectional Bit 9 of the parallel data bus; in all serial modes it is the serial data clock input or output depending on the EXT/INT state.
23 D10/SYNC bidirectional Bit 10 of the parallel data output bus; in serial master mode it is the digital output frame synchronization for the internal data clock, with polarity set by INVSYNC.
24 D11/RDERROR output Bit 11 of the parallel data output bus; in serial slave mode it is a read error flag that pulses high if a data read is not completed when the current conversion finishes.
25 D12/HW/SW bidirectional Bit 12 of the parallel data bus; in serial mode HW/SW low selects software configuration via the serial configuration register and HW/SW high selects hardware configuration via dedicated pins.
26 D13/SCIN bidirectional Bit 13 of the parallel data bus; in serial software configuration mode it is the serial configuration data input, MSB first, latched with SCCLK.
27 D14/SCCLK bidirectional Bit 14 of the parallel data bus; in serial software configuration mode it is the serial configuration clock that clocks in SCIN, with the active edge set by INVSCLK.
28 D15/SCCS bidirectional Bit 15 of the parallel data bus; in serial software configuration mode it is the serial configuration chip select that enables the configuration port.
29 BUSY output Busy output that goes high when a conversion starts and stays high until the conversion is complete and data is latched, and whose falling edge can be used as a data-ready clock.
30 TEN input Input range select used with BIPOLAR: low/low gives 0 V to 5 V, low/high gives 0 V to 10 V, high/low gives ±5 V and high/high gives ±10 V (don't-care in serial software configuration mode).
31 RD input Read data input; when CS and RD are both low the parallel or serial output bus is enabled.
32 CS input Chip select input; when CS and RD are both low the parallel or serial output bus is enabled, and CS also gates the external clock in slave serial mode.
33 RESET input Reset input; when high it resets the AD7612 and aborts any current conversion, and its falling edge resets the data outputs to zero and clears the configuration register.
34 PD input Power-down input; when high the ADC is powered down and conversions are inhibited after the current one completes, while the digital interface remains active.
35 CNVST input Conversion start input; a falling edge puts the internal sample-and-hold into hold and initiates a conversion.
36 BIPOLAR input Input range select used with TEN as defined for pin 30 (don't-care in serial software configuration mode).
37 REF bidirectional Reference input/output that produces 5 V when PDREF/PDBUF are low, or accepts an external reference up to AVDD when they are high, and requires at least 22 μF decoupling with or without the internal reference.
38 REFGND passive Reference input analog ground that senses the reference voltage and should be connected to the analog ground plane as a low-impedance return.
39 IN− passive Analog input ground sense that should be connected to the analog ground plane or to a remote sense ground.
40 VCC power_in High voltage positive supply, normally +7 V to +15 V.
41 VEE power_in High voltage negative supply, normally 0 V to −15 V (0 V in unipolar ranges).
42 AGND power_in Analog power ground pin and ground reference for all analog I/O, which should be connected to the analog ground plane and kept at the same potential as AGND, DGND and OGND.
43 IN+ passive Analog input referenced to IN−, with the input voltage range set by the selected input range.
44 AVDD power_in Analog power supply, nominally 4.75 V to 5.25 V, decoupled with 10 μF and 100 nF capacitors.
45 TEMP output Temperature sensor analog output.
46 REFBUFIN passive Reference buffer input that, when PDBUF is low and PDREF is high, produces 5 V on the REF pin from an applied 2.5 V.
47 PDREF input Internal reference power-down input; when low the internal reference is enabled, and when high it is powered down and an external reference must be used.
48 PDBUF input Internal reference buffer power-down input; when low the buffer is enabled and must be low when using the internal reference, and when high the buffer is powered down.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package LQFP-48(7x7)
Category Data Converters
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Voltage Range, VIN (VIN+ − VIN− = 0 V to 5 V) VIN -0.1 5.1 V VIN+ − VIN− = 0 V to 5 V 3
Voltage Range, VIN (VIN+ − VIN− = 0 V to 10 V) VIN -0.1 10.1 V VIN+ − VIN− = 0 V to 10 V 3
Voltage Range, VIN (VIN+ − VIN− = ±5 V) VIN -5.1 5.1 V VIN+ − VIN− = ±5 V 3
Voltage Range, VIN (VIN+ − VIN− = ±10 V) VIN -10.1 10.1 V VIN+ − VIN− = ±10 V 3
Voltage Range, VIN− to AGND VIN− -0.1 0.1 V VIN− to AGND 3
Throughput Rate (warp mode) 750 kSPS In warp mode 3
Throughput Rate (normal mode) 0 600 kSPS In normal mode 3
Throughput Rate (impulse mode) 0 500 kSPS In impulse mode 3
Integral Linearity Error -1.5 0.75 1.5 LSB 3
Differential Linearity Error -1 1.5 LSB 3
Zero Error (Unipolar or Bipolar) -35 35 LSB Unipolar or Bipolar 3
Zero Error Temperature Drift -1 1 ppm/°C 3
Bipolar Full-Scale Error -50 50 LSB 3
Unipolar Full-Scale Error -70 70 LSB 3
Full-Scale Error Temperature Drift -1 1 ppm/°C 3
Dynamic Range 92.5 93.5 dB VIN = 0 V to 5 V, fIN = 2 kHz, −60 dB 3
Signal-to-Noise Ratio SNR 92 93 dB VIN = 0 V to 5 V, 0 V to 10 V, fIN = 2 kHz 3
Internal Reference Output Voltage REF 4.965 5 5.035 V REF @ 25°C 3
Internal Reference Temperature Drift -3 3 ppm/°C −40°C to +85°C 3
Line Regulation -15 15 ppm/V AVDD = 5 V ± 5% 3
SDOUT Valid Delay from External SDCLK Active Edge (t32) t32 2 18 ns External SDCLK active edge to SDOUT delay; serial interface modes, CL = 10 pF 6
Analog Input Supply AVDD (recommended) AVDD 4.75 5.25 V Nominally 8
High Voltage Positive Supply VCC (recommended) VCC 7 15 V Normally 11
High Voltage Negative Supply VEE (recommended) VEE -15 0 V Normally 0 V to −15 V (0 V in unipolar ranges) 11
Digital Output Supply OVDD (recommended) OVDD 2.3 5.25 V Interface with logic working between 2.3 V and 5.25 V 22
Operating Temperature Range TA -40 85 °C Operation is specified from −40°C to +85°C 1
Ground Voltage Differences AGND, DGND, OGND -0.3 0.3 V 7
Supply Voltages AVDD, DVDD, OVDD AVDD, DVDD, OVDD -0.3 7 V 7
AVDD to DVDD, AVDD to OVDD -7 7 V 7
DVDD to OVDD -7 7 V 7
VCC to AGND, DGND VCC -0.3 16.5 V 7
VEE to GND VEE -16.5 0.3 V 7
PDREF, PDBUF Input Current -20 20 mA 7
Internal Power Dissipation (LQFP) PD 700 mW Free air, 48-Lead LQFP 7
Junction Temperature TJ 125 °C 7
Storage Temperature Range TSTG -65 125 °C 7
Thermal Resistance Junction-to-Ambient (LQFP) θJA 91 °C/W Free air, 48-Lead LQFP 7
Thermal Resistance Junction-to-Case (LQFP) θJC 30 °C/W Free air, 48-Lead LQFP 7

CAD (KiCad official)

  • Symbol: AD7612BSTZ
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: ad7612bstz-etched.step / ad7612bstz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ad7612bstz.step / ad7612bstz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (32 pp, sha256 be0cbe2f1013fb54, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF