main
Ray Publish 0.1.0 ff73a70
{
  "slug": "ad7612bstz",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Analog To Digital Converters (ADCs), LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "data converters",
    "ad7612bstz",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ad7612bstz.kicad_sym",
    "ad7612bstz.kicad_mod",
    "ad7612bstz.glb",
    "ad7612bstz.step",
    "ad7612bstz.lbr",
    "docs/hero.png",
    "docs/ad7612bstz-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ad7612bstz-hero.glb",
    "ad7612bstz-hero.overlay.json"
  ],
  "component": {
    "mpn": "AD7612BSTZ",
    "manufacturer": "Analog Devices",
    "package": "LQFP-48(7x7)",
    "pin_count": 48,
    "category": "Data Converters",
    "subcategory": "Analog To Digital Converters (ADCs)",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/AD7612.pdf",
    "parts": {
      "symbol": "ad7612bstz.kicad_sym",
      "footprint": "ad7612bstz.kicad_mod",
      "model_3d": "ad7612bstz-hero.glb",
      "model_3d_plain": "ad7612bstz.glb",
      "model_3d_step": "ad7612bstz-etched.step",
      "model_3d_step_plain": "ad7612bstz.step",
      "lbr": "ad7612bstz.lbr"
    },
    "distributor_links": {
      "lcsc": "C578452",
      "digikey": "505-AD7612BSTZ-ND",
      "mouser": "584-AD7612BSTZ"
    },
    "distributor_check": {
      "checked_at": "2026-11-13T17:47:14Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-AD7612BSTZ-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-AD7612BSTZ",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog power ground pin and ground reference for all analog I/O, which should be connected to the analog ground plane and kept at the same potential as AGND, DGND and OGND."
      },
      {
        "number": "2",
        "name": "AVDD",
        "type": "power_in",
        "description": "Analog power supply, nominally 4.75 V to 5.25 V, decoupled with 10 μF and 100 nF capacitors."
      },
      {
        "number": "3",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog power ground pin and ground reference for all analog I/O, which should be connected to the analog ground plane and kept at the same potential as AGND, DGND and OGND."
      },
      {
        "number": "4",
        "name": "BYTESWAP",
        "type": "input",
        "description": "Parallel mode 8/16-bit byte-order select: when high the LSB is output on D[15:8] and the MSB on D[7:0], and when low the LSB is output on D[7:0] and the MSB on D[15:8]."
      },
      {
        "number": "5",
        "name": "OB/2C",
        "type": "input",
        "description": "Output coding select: when high the output is straight binary, and when low the MSB is inverted to give twos complement output (this pin is a don't-care in serial software configuration mode)."
      },
      {
        "number": "6",
        "name": "WARP",
        "type": "input",
        "description": "Conversion mode select used with IMPULSE: WARP/IMPULSE low/low is normal, low/high is impulse, high/low is warp and high/high is normal (don't-care in serial software configuration mode)."
      },
      {
        "number": "7",
        "name": "IMPULSE",
        "type": "input",
        "description": "Conversion mode select used with WARP as defined for pin 6 (don't-care in serial software configuration mode)."
      },
      {
        "number": "8",
        "name": "SER/PAR",
        "type": "input",
        "description": "Serial/parallel selection: when low the parallel mode is selected, and when high the serial modes are selected with some data bus bits used as the serial port."
      },
      {
        "number": "9",
        "name": "D0",
        "type": "output",
        "description": "Bit 0 of the parallel port data output bus, which is always an output regardless of the SER/PAR state."
      },
      {
        "number": "10",
        "name": "D1",
        "type": "output",
        "description": "Bit 1 of the parallel port data output bus, which is always an output regardless of the SER/PAR state."
      },
      {
        "number": "11",
        "name": "D2/DIVSCLK[0]",
        "type": "bidirectional",
        "description": "Bit 2 of the parallel data bus; in serial master read-after-convert mode it is a serial data division clock select input that can slow the internal SDCLK, and is a high-impedance output in other serial modes."
      },
      {
        "number": "12",
        "name": "D3/DIVSCLK[1]",
        "type": "bidirectional",
        "description": "Bit 3 of the parallel data bus; in serial master read-after-convert mode it is a serial data division clock select input that can slow the internal SDCLK, and is a high-impedance output in other serial modes."
      },
      {
        "number": "13",
        "name": "D4/EXT/INT",
        "type": "bidirectional",
        "description": "Bit 4 of the parallel data bus; in serial mode EXT/INT low selects the internal master serial clock and EXT/INT high selects an external slave clock on SDCLK."
      },
      {
        "number": "14",
        "name": "D5/INVSYNC",
        "type": "bidirectional",
        "description": "Bit 5 of the parallel data bus; in serial master mode INVSYNC low makes SYNC active high and INVSYNC high makes SYNC active low."
      },
      {
        "number": "15",
        "name": "D6/INVSCLK",
        "type": "bidirectional",
        "description": "Bit 6 of the parallel data bus; in all serial modes INVSCLK low uses the rising edge and INVSCLK high uses the falling edge of SDCLK/SCCLK."
      },
      {
        "number": "16",
        "name": "D7/RDC/SDIN",
        "type": "bidirectional",
        "description": "Bit 7 of the parallel data bus; in serial master mode RDC low reads the current result after conversion and RDC high reads the previous result during conversion, while in serial slave mode it is the SDIN daisy-chain data input."
      },
      {
        "number": "17",
        "name": "OGND",
        "type": "power_in",
        "description": "Input/output interface digital power ground and ground reference for the digital outputs, ideally at the same potential as AGND and DGND."
      },
      {
        "number": "18",
        "name": "OVDD",
        "type": "power_in",
        "description": "Input/output interface digital power, nominally at the host interface supply of 2.5 V, 3 V or 5 V, decoupled with 10 μF and 100 nF capacitors."
      },
      {
        "number": "19",
        "name": "DVDD",
        "type": "power_in",
        "description": "Digital power supply, nominally 4.75 V to 5.25 V, decoupled with 10 μF and 100 nF capacitors, and can be supplied from AVDD."
      },
      {
        "number": "20",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital power ground and ground reference for the digital outputs, which should be connected to system digital ground ideally at the same potential as AGND and OGND."
      },
      {
        "number": "21",
        "name": "D8/SDOUT",
        "type": "output",
        "description": "Bit 8 of the parallel data output bus; in all serial modes it is the serial data output, MSB first, synchronized to SDCLK."
      },
      {
        "number": "22",
        "name": "D9/SDCLK",
        "type": "bidirectional",
        "description": "Bit 9 of the parallel data bus; in all serial modes it is the serial data clock input or output depending on the EXT/INT state."
      },
      {
        "number": "23",
        "name": "D10/SYNC",
        "type": "bidirectional",
        "description": "Bit 10 of the parallel data output bus; in serial master mode it is the digital output frame synchronization for the internal data clock, with polarity set by INVSYNC."
      },
      {
        "number": "24",
        "name": "D11/RDERROR",
        "type": "output",
        "description": "Bit 11 of the parallel data output bus; in serial slave mode it is a read error flag that pulses high if a data read is not completed when the current conversion finishes."
      },
      {
        "number": "25",
        "name": "D12/HW/SW",
        "type": "bidirectional",
        "description": "Bit 12 of the parallel data bus; in serial mode HW/SW low selects software configuration via the serial configuration register and HW/SW high selects hardware configuration via dedicated pins."
      },
      {
        "number": "26",
        "name": "D13/SCIN",
        "type": "bidirectional",
        "description": "Bit 13 of the parallel data bus; in serial software configuration mode it is the serial configuration data input, MSB first, latched with SCCLK."
      },
      {
        "number": "27",
        "name": "D14/SCCLK",
        "type": "bidirectional",
        "description": "Bit 14 of the parallel data bus; in serial software configuration mode it is the serial configuration clock that clocks in SCIN, with the active edge set by INVSCLK."
      },
      {
        "number": "28",
        "name": "D15/SCCS",
        "type": "bidirectional",
        "description": "Bit 15 of the parallel data bus; in serial software configuration mode it is the serial configuration chip select that enables the configuration port."
      },
      {
        "number": "29",
        "name": "BUSY",
        "type": "output",
        "description": "Busy output that goes high when a conversion starts and stays high until the conversion is complete and data is latched, and whose falling edge can be used as a data-ready clock."
      },
      {
        "number": "30",
        "name": "TEN",
        "type": "input",
        "description": "Input range select used with BIPOLAR: low/low gives 0 V to 5 V, low/high gives 0 V to 10 V, high/low gives ±5 V and high/high gives ±10 V (don't-care in serial software configuration mode)."
      },
      {
        "number": "31",
        "name": "RD",
        "type": "input",
        "description": "Read data input; when CS and RD are both low the parallel or serial output bus is enabled."
      },
      {
        "number": "32",
        "name": "CS",
        "type": "input",
        "description": "Chip select input; when CS and RD are both low the parallel or serial output bus is enabled, and CS also gates the external clock in slave serial mode."
      },
      {
        "number": "33",
        "name": "RESET",
        "type": "input",
        "description": "Reset input; when high it resets the AD7612 and aborts any current conversion, and its falling edge resets the data outputs to zero and clears the configuration register."
      },
      {
        "number": "34",
        "name": "PD",
        "type": "input",
        "description": "Power-down input; when high the ADC is powered down and conversions are inhibited after the current one completes, while the digital interface remains active."
      },
      {
        "number": "35",
        "name": "CNVST",
        "type": "input",
        "description": "Conversion start input; a falling edge puts the internal sample-and-hold into hold and initiates a conversion."
      },
      {
        "number": "36",
        "name": "BIPOLAR",
        "type": "input",
        "description": "Input range select used with TEN as defined for pin 30 (don't-care in serial software configuration mode)."
      },
      {
        "number": "37",
        "name": "REF",
        "type": "bidirectional",
        "description": "Reference input/output that produces 5 V when PDREF/PDBUF are low, or accepts an external reference up to AVDD when they are high, and requires at least 22 μF decoupling with or without the internal reference."
      },
      {
        "number": "38",
        "name": "REFGND",
        "type": "passive",
        "description": "Reference input analog ground that senses the reference voltage and should be connected to the analog ground plane as a low-impedance return."
      },
      {
        "number": "39",
        "name": "IN−",
        "type": "passive",
        "description": "Analog input ground sense that should be connected to the analog ground plane or to a remote sense ground."
      },
      {
        "number": "40",
        "name": "VCC",
        "type": "power_in",
        "description": "High voltage positive supply, normally +7 V to +15 V."
      },
      {
        "number": "41",
        "name": "VEE",
        "type": "power_in",
        "description": "High voltage negative supply, normally 0 V to −15 V (0 V in unipolar ranges)."
      },
      {
        "number": "42",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog power ground pin and ground reference for all analog I/O, which should be connected to the analog ground plane and kept at the same potential as AGND, DGND and OGND."
      },
      {
        "number": "43",
        "name": "IN+",
        "type": "passive",
        "description": "Analog input referenced to IN−, with the input voltage range set by the selected input range."
      },
      {
        "number": "44",
        "name": "AVDD",
        "type": "power_in",
        "description": "Analog power supply, nominally 4.75 V to 5.25 V, decoupled with 10 μF and 100 nF capacitors."
      },
      {
        "number": "45",
        "name": "TEMP",
        "type": "output",
        "description": "Temperature sensor analog output."
      },
      {
        "number": "46",
        "name": "REFBUFIN",
        "type": "passive",
        "description": "Reference buffer input that, when PDBUF is low and PDREF is high, produces 5 V on the REF pin from an applied 2.5 V."
      },
      {
        "number": "47",
        "name": "PDREF",
        "type": "input",
        "description": "Internal reference power-down input; when low the internal reference is enabled, and when high it is powered down and an external reference must be used."
      },
      {
        "number": "48",
        "name": "PDBUF",
        "type": "input",
        "description": "Internal reference buffer power-down input; when low the buffer is enabled and must be low when using the internal reference, and when high the buffer is powered down."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin 49 (EPAD) appears in Table 6 but applies only to the LFCSP_VQ package; it is excluded because th; Pin types for multi-function pins are a judgment call: pins marked DI/O in Table 6 are typed bidirec; Pins 5, 6, 7, 30, 36 are marked DI2 with a footnote that they are don't-care in serial software conf"
        ],
        "pages_sent": 14,
        "cost_usd": 0.2159,
        "at": "2026-11-13T17:47:03"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/AD7612.pdf",
        "pages": 32,
        "sha256": "be0cbe2f1013fb54",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 48,
        "described": 48,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ad7612bstz.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9.0,
          9.0,
          1.5
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "9dea352d93177c2904afd7d7b68ea8855ce1ab691f69f8b3e13655600514b6bf",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ad7612bstz-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9.0,
          9.0,
          1.5
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "a7436a32972c14ff9959d5d1fad922cc69698b7bce3474415a47502b643331c0",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "ST-48",
      "source_page": 32,
      "D": {
        "nom_mm": 7.0,
        "range_mm": [
          6.8,
          7.2
        ]
      },
      "E1": {
        "nom_mm": 7.0,
        "range_mm": [
          6.8,
          7.2
        ]
      },
      "E": {
        "nom_mm": 9.0,
        "range_mm": [
          8.8,
          9.2
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.6,
        "range_mm": [
          null,
          1.6
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "ad7612bstz.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}