main
Ray
Publish 0.1.0
2ba2865
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283
{
"slug": "1ed3860mc12mxuma1",
"version": "0.1.0",
"type": "component",
"description": "Infineon Technologies Gate Drive ICs, SOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power management",
"1ed3860mc12mxuma1",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"1ed3860mc12mxuma1.kicad_sym",
"1ed3860mc12mxuma1.kicad_mod",
"1ed3860mc12mxuma1.glb",
"1ed3860mc12mxuma1.step",
"1ed3860mc12mxuma1.lbr",
"docs/hero.png",
"docs/1ed3860mc12mxuma1-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"1ed3860mc12mxuma1-hero.glb",
"1ed3860mc12mxuma1-hero.overlay.json",
"1ed3860mc12mxuma1-etched.glb"
],
"component": {
"mpn": "1ED3860MC12MXUMA1",
"manufacturer": "Infineon Technologies",
"package": "SOP-16",
"pin_count": 16,
"category": "Power Management",
"subcategory": "Gate Drive ICs",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/a623580fcf115f52dd10a1ad3ce97f08.pdf",
"parts": {
"symbol": "1ed3860mc12mxuma1.kicad_sym",
"footprint": "1ed3860mc12mxuma1.kicad_mod",
"model_3d": "1ed3860mc12mxuma1-hero.glb",
"model_3d_plain": "1ed3860mc12mxuma1-etched.glb",
"model_3d_step": "1ed3860mc12mxuma1-etched.step",
"model_3d_step_plain": "1ed3860mc12mxuma1.step",
"lbr": "1ed3860mc12mxuma1.lbr"
},
"distributor_links": {
"lcsc": "C17558509",
"digikey": "448-1ED3860MC12MXUMA1TR-ND",
"mouser": "726-D3860MC12MXUMA1"
},
"distributor_check": {
"checked_at": "2026-11-12T07:13:33Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "448-1ED3860MC12MXUMA1TR-ND",
"status": "found"
},
"mouser": {
"pn": "726-D3860MC12MXUMA1",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "GND1",
"type": "power_in",
"description": "Reference ground of the input side; connect directly to the input signal ground."
},
{
"number": "2",
"name": "VCC1",
"type": "power_in",
"description": "Positive input-side supply, to be connected to 5 V or 3.3 V, with a decoupling capacitor placed close to this pin and GND1."
},
{
"number": "3",
"name": "SCL",
"type": "input",
"description": "Clock input of the I2C bus, CMOS-compatible at 5 V or 3.3 V and referenced to GND1, with a pull-up resistor to VCC1."
},
{
"number": "4",
"name": "SDA",
"type": "bidirectional",
"description": "Serial data I/O of the I2C bus (open-drain, CMOS) for 5 V or 3.3 V microcontroller I/O, referenced to GND1, with a pull-up resistor to VCC1."
},
{
"number": "5",
"name": "RDYC",
"type": "bidirectional",
"description": "Open-drain combined ready output (high active), fault-clear input and soft-off input (low active), referenced to GND1 with an external pull-up to VCC1 (typically 2.2 kΩ)."
},
{
"number": "6",
"name": "FLT_N",
"type": "bidirectional",
"description": "Open-drain fault output (active low) and fault-off input (low active), referenced to GND1 with an external pull-up to VCC1 (typically 2.2 kΩ)."
},
{
"number": "7",
"name": "IN",
"type": "input",
"description": "Non-inverting gate driver input (5 V or 3.3 V CMOS) with an internal 40 kΩ pull-down that keeps the IGBT off if the pin is not connected."
},
{
"number": "8",
"name": "GND1",
"type": "power_in",
"description": "Reference ground of the input side; connect directly to the input signal ground."
},
{
"number": "9",
"name": "VEE2",
"type": "power_in",
"description": "Negative output-side supply, to be connected to 0 V to -25 V referenced to GND2; if no negative supply is used, all VEE2 pins must be connected to GND2."
},
{
"number": "10",
"name": "CLAMP",
"type": "power_out",
"description": "Active Miller clamp output (high-current, connected directly to the IGBT gate), or clamp pre-driver output for an external n-channel MOSFET, or 8-bit ADC sense input between CLAMP and VEE2, depending on register configuration."
},
{
"number": "11",
"name": "OFF",
"type": "power_out",
"description": "High-current driver sink output to discharge the IGBT gate through the turn-off gate resistor; it also sinks the soft-off current and serves as sense input for PINSTAT.OFF_PIN and TLTO_LVL."
},
{
"number": "12",
"name": "ON",
"type": "power_out",
"description": "High-current driver source output to charge the IGBT gate through the turn-on gate resistor; it is also the sense input for the CLAMP function and PINSTAT.ON_PIN."
},
{
"number": "13",
"name": "DESAT",
"type": "input",
"description": "Enhanced desaturation detection input referenced to GND2, connected to the IGBT collector through a protection resistor and high-voltage diode to monitor VCE."
},
{
"number": "14",
"name": "VCC2",
"type": "power_in",
"description": "Positive output-side supply, referenced to GND2, with decoupling capacitors placed close to VCC2-VEE2 and VCC2-GND2."
},
{
"number": "15",
"name": "GND2",
"type": "power_in",
"description": "Reference ground of the output side, connected to the common voltage of a bipolar supply and the IGBT emitter, with decoupling capacitors close to VCC2-GND2 and GND2-VEE2."
},
{
"number": "16",
"name": "VEE2",
"type": "power_in",
"description": "Negative output-side supply, to be connected to 0 V to -25 V referenced to GND2; if no negative supply is used, all VEE2 pins must be connected to GND2."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The requested package hint is SOP-16, but the datasheet only names the package as PG-DSO-16 (300 mil; Pin types were mapped to KiCad classes from the datasheet's pin-type column, and the datasheet does ; Pin 10 (CLAMP) has three functions selected by register configuration (Miller clamp, clamp pre-drive"
],
"pages_sent": 18,
"cost_usd": 0.0055,
"at": "2026-11-12T07:13:25"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/a623580fcf115f52dd10a1ad3ce97f08.pdf",
"pages": 46,
"sha256": "3af8d1dbf1447cd4",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 16,
"described": 16,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "1ed3860mc12mxuma1.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
10.3,
10.3,
2.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "159663ceb2b4996b1b89d3111e4a355fc27de3e24d3570f50e5ed9086e0d73af",
"checked": "2026-11-12",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "1ed3860mc12mxuma1-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
10.3,
10.3,
2.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "15fea03ed18f2715523c5cfc5b0283b3f19dcaee1eccfe8146c571b76038d996",
"checked": "2026-11-12",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "PG-DSO-16-28/33",
"source_page": 45,
"D": {
"nom_mm": 10.3,
"range_mm": [
null,
null
]
},
"E1": {
"nom_mm": 7.5,
"range_mm": [
null,
null
]
},
"E": {
"nom_mm": 10.3,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 2.65,
"range_mm": [
null,
2.65
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "1ed3860mc12mxuma1.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}