Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

FT231XS-R

FTDI · USB ICs · SSOP-20-150mil

FT231XS-R from FTDI, in a SSOP-20-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DTR# output Data Terminal Ready control output / handshake signal (active low).
2 RTS# output Request to Send control output / handshake signal (active low).
3 VCCIO power_in 1V8 to 3V3 supply for the IO cells.
4 RXD input Receive asynchronous data input for the UART.
5 RI# input Ring Indicator input for remote wake up (active low).
6 GND power_in 0V ground input.
7 DSR# input Data Set Ready control input / handshake signal (active low).
8 DCD# input Data Carrier Detect control input (active low).
9 CTS# input Clear To Send control input / handshake signal (active low).
10 CBUS2 bidirectional Configurable CBUS I/O pin whose function is set in the MTP memory; default is TXLED#, and it can be set to any option in Table 3.7. Inputs are pulled to VCCIO via approx. 75kΩ.
11 USBDP input USB Data Signal Plus.
12 USBDM input USB Data Signal Minus.
13 3V3OUT power_out 3V3 output at 50mA that may be used to power VCCIO; when VCC is 3V3 this pin is an input and must be driven with 3V3.
14 RESET# input Reset input (active low).
15 VCC power_in 5 V or 3V3 supply to the IC; if VCC is 3V3, 3V3OUT must also be driven with a 3V3 input.
16 GND power_in 0V ground input.
17 CBUS1 bidirectional Configurable CBUS I/O pin whose function is set in the MTP memory; default is RXLED#, and it can be set to any option in Table 3.7. Inputs are pulled to VCCIO via approx. 75kΩ.
18 CBUS0 bidirectional Configurable CBUS I/O pin whose function is set in the MTP memory; default is TXDEN, and it can be set to any option in Table 3.7. Inputs are pulled to VCCIO via approx. 75kΩ.
19 CBUS3 bidirectional Configurable CBUS I/O pin whose function is set in the MTP memory; default is SLEEP#, and it can be set to any option in Table 3.7. Inputs are pulled to VCCIO via approx. 75kΩ.
20 TXD output Transmit asynchronous data output for the UART.

Key specifications

Parameter Value
Manufacturer FTDI
Package SSOP-20-150mil
Category Interface ICs
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage Temperature -65 150 Degrees C 16
Ambient Operating Temperature (Power Applied) -40 85 Degrees C Power applied 16
VCC Supply Voltage VCC -0.3 5.5 V 16
VCCIO IO Voltage VCCIO -0.3 4 V 16
DC Input Voltage, USBDP and USBDM -0.5 3.63 V 16
DC Input Voltage, High Impedance Bi-directionals (powered from VCCIO) -0.3 5.8 V Powered from VCCIO 16
DC Output Current, Outputs 22 mA 16
ESD Human Body Mode (HBM) -2 2 kV Table 5.2 threshold printed as > ±2kV 16
ESD Machine Mode (MM) -200 200 V Table 5.2 threshold printed as > ±200V 16
ESD Charged Device Mode (CDM) -500 500 V Table 5.2 threshold printed as > ±500V 16
Latch-up -200 200 mA Table 5.2 threshold printed as > ±200mA 16
VCC Operating Supply Voltage VCC 2.97 5 5.5 V Normal Operation 17
VCCIO Operating Supply Voltage VCCIO 1.62 3.63 V 17
Operating Supply Current (Icc1) Icc1 8 8 8.4 mA Normal Operation 17
3.3V regulator output 3V3 2.97 3.3 3.63 V 17
Voh Output Voltage High (VCCIO=+3.3V, drive 4mA) Voh 2.97 V VCCIO = +3.3V; Ioh = +/-2mA; I/O drive strength = 4mA 18
Voh Output Voltage High (VCCIO=+3.3V, drive 8mA) Voh 2.97 V VCCIO = +3.3V; I/O drive strength = 8mA 18
Voh Output Voltage High (VCCIO=+3.3V, drive 12mA) Voh 2.97 V VCCIO = +3.3V; I/O drive strength = 12mA 18
Voh Output Voltage High (VCCIO=+3.3V, drive 16mA) Voh 2.97 V VCCIO = +3.3V; I/O drive strength = 16mA 18
Vol Output Voltage Low (VCCIO=+3.3V, drive 4mA) Vol 0 0.4 V VCCIO = +3.3V; Iol = +/-2mA; I/O drive strength = 4mA 18
Vol Output Voltage Low (VCCIO=+3.3V, drive 8mA) Vol 0 0.4 V VCCIO = +3.3V; I/O drive strength = 8mA 18
Vol Output Voltage Low (VCCIO=+3.3V, drive 12mA) Vol 0 0.4 V VCCIO = +3.3V; I/O drive strength = 12mA 18
Vol Output Voltage Low (VCCIO=+3.3V, drive 16mA) Vol 0 0.4 V VCCIO = +3.3V; I/O drive strength = 16mA 18
Vil Input low Switching Threshold (VCCIO=+3.3V) Vil 0.8 V LVTTL 18
Vih Input High Switching Threshold (VCCIO=+3.3V) Vih 2 V LVTTL 18
Input pull-up resistance (VCCIO=+3.3V) Rpu 40 75 190 KΩ Vin = 0 18
Input pull-down resistance (VCCIO=+3.3V) Rpd 40 75 190 KΩ Vin =VCCIO 18
Input Leakage Current (VCCIO=+3.3V) Iin -10 10 μA Vin = 0 18
Tri-state output leakage current (VCCIO=+3.3V) Ioz -10 10 μA Vin = 5.5V or 0 18
USB I/O Output Voltage Low (USBDP, USBDM) Vol 0.2 V 21
USB I/O Input low Switching Threshold (USBDP, USBDM) Vil 0.8 V 21
USB I/O Input High Switching Threshold (USBDP, USBDM) Vih 2 V 21
Frequency of Operation (internal clock) 11.98 12 12.02 MHz 21
Clock Period (internal clock) 83.19 83.33 83.47 ns 21
Duty Cycle (internal clock) 45 50 55 % 21
Operating Supply Current (Icc2) Icc2 125 μA USB Suspend 17
Switching Threshold (VCCIO=+3.3V) Vt 1.49 V LVTTL 18
Schmitt trigger negative going threshold voltage (VCCIO=+3.3V) Vt- 1.15 V 18
Schmitt trigger positive going threshold voltage (VCCIO=+3.3V) Vt+ 1.64 V 18

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing Abs ESD Human Body Mode (HDM) 2000 V Class 2 Table 5.1 Absolute Maximum Ratings 16

CAD (KiCad official)

  • Symbol: FT231XS-R
  • Footprint: Package_SO:SSOP-20_3.9x8.7mm_P0.635mm
  • 3D model: SSOP-20-150mil (KiCad packages3D, STEP)
  • 3D model files: ft231xs-r-etched.step / ft231xs-r-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ft231xs-r.step / ft231xs-r.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: FTDI datasheet (44 pp, sha256 8999a05c9ad906a0, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF